Question about 2001 Nissan Maxima
You may need to check the wiring or the 3 terminal connector with special attention to the wire/connector of the low beam. In certain instances, it maybe simpler to hard wire another wire from the left's low beam and extend it to the right. As to the connector, you may need to scrape off any burn marks or corrosion.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
Posted on Jul 13, 2008
It sounds like the same sort of issue I had. Got my local mechanic to fix it but I belive it might be a DIY if you are willing.
I would check the DRL module - it appears that Nissan did not do a good job soldering the contact points. My mechanic re-soldered the contact points and the problem went away. He also suggested that this is becoming a common problem not just for Maximas but other Nissan products as well. Took about an hour to repair...good luck.
Posted on Aug 06, 2008
Tips for a great answer:
Jan 30, 2014 | Cars & Trucks
Jun 08, 2011 | 2004 Chevrolet Cavalier
May 16, 2011 | 2003 Ford Escape
Nov 19, 2010 | 2003 GMC Envoy
Nov 16, 2009 | 2002 Ford F150 Regular Cab
Oct 30, 2009 | 1995 Honda Odyssey
Apr 01, 2009 | 2001 Subaru Outback
Dec 07, 2014 | 2001 Nissan Maxima
234 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: