Question about 1995 Oldsmobile Cutlass Supreme

1 Answer

Replacing a master cylinder in a 1995 Oldsmobile Cutlass Supreme.

I need to replace the master cylinder in a 1995 Oldsmobile. My neighbour has one from a 1994 Buick. Would the master cylinder from a 1994 Buick work in a 1995 Oldsmobile? Both have ABS. Is there a difference in the computer system from 1994 to 1995.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Never Never Do this! Just buy a brand new one there is too much at risk sorry never play with brakes just for money. No rebuilt either only bran new will do.

Posted on Jul 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What makes the fuel pump not kick on on a 92 Oldsmobile Cutlass


There is a red wire close to the battery in the front. It's not connected to anything. Apply positive voltage and that will run your pump for testing purposes.

Dec 08, 2015 | Oldsmobile Cars & Trucks

2 Answers

Replacing fuel filter in1995 oldsmobile cutlass supreme


Fuel filter is located under car mounted to frame.

Sep 30, 2011 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Where is the brake bleeder on a 1995 oldsmobile cutlass supreme?!?!


you have 4 of them 2 in front / 2 in back . 2 in back are on the brake backing plate 1 bleeder on each side. 2 in front 1 bleeder on each side on the caliper. when bleeding start with rigth rear left rear front rigth frontleft . check master cylinder fluid level while bleeding. keep full of fluid

Nov 12, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Where is the fill hole for manual transmission on front wheel drive 1988 olds cutlass supreme


there should be no fill hole for a manual trans if you are speaking of the slave cylinder for the clutch its on the fire wall near the brake master cylinder.in fact it looks like a minature master cylinder.

May 11, 2010 | 1988 Oldsmobile Cutlass Supreme

1 Answer

Need to know the firing order of sparkplug wires on a 1995 olsmobile supreme cutlass


For the 1995 Oldsmobile Cutlass Supreme:
I do not know if you have the 3.1L V6 or the 3.4L DOHC V6; however below are included below:

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
........(back)........
|...1......3.......5...|
..........................
|...2.......4......6...|
.........(front)
Ignition Coil Connections:
...........(back)
.|5..2.|..|.3..6.|..|.4..1.|
...........(front)

For the 3.4L DOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.........(back).........
|...1.......3.......5...|
...........................
|...2.......4.......6...|
..........(front)
Ignition Coils Connections:
..........(back)
.|.1..4.|.|.3..6.|.|.2..5.| (Honestly: I'm thinking it should be 6..3 not 3..6)
..........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!







Apr 14, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Need to know the firing order of a 1995 oldsmobile cutless supreme/3100/v6


For 1995 Oldsmobile Cutlass Supreme 3.1 liter V-6 VIN "M" check...

72227b5.gif

Hope help (remember rated this).

Mar 25, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

I need step by step instructions for replacing a thermostat in a 1995 cutlass supreme


Best bet is to go to your local auto parts store, and buy a Hayens Service book, cost is about 20.00.....but well worth it.

Nov 21, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

95 oldsmobile cutlass supreme 3.1 engine not starting even after replacing starter and battery


it is probably one of two things. the electronic ignition or the fuel pump. im betting on the ignition

Jul 07, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Cutlass Supreme new front wheel bearing repeatedly goes out


You may have pulled the inner tri-pod joint out of the cv shaft and that will make noise. Is the bearing really bad? Does it turn freely?

Jun 23, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

1995 cutlass supreme passenger front power window won't go down. Master control from driver side works. Child lock is NOT on. Any ideas?


change out the window's drive motor, the teeth on the drive shaft have most likely broken off as they are plastic.

Mar 21, 2009 | 1995 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1995 Oldsmobile Cutlass Supreme Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...