Question about 1998 Dodge Caravan

1 Answer

4 cly 98 dodge caravan

Im replaceing the exhaust manifold what steps do i need to make it easy toget to

Posted by on

1 Answer

Are you sure its the exhaust manifold? I thought so on mine, but turned out to be the crossover pipe. If so, the crossover is only available from dealer and is ~$550. When removing old pipe, bolts are very difficult to get to, and some are only removable from one side (they are studs). I found the site below has excellent instructions with diagrams. Important! Before installing, ensure the bolts fit through the holes in the new part (mine did not).
http://www.popularmechanics.com/automotive/how_to/4218244.html

Posted on Sep 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 dodge caravan. Changed engine. Ran a few


defective catalytic convertor. It may be plugged up.Make sure ALL the exhaust line from intake manifold(at engine block) to final exhaust pipe are not clogged up.You have reverse exhaust pressure going back towards engine manifold.

Oct 21, 2014 | 2001 Dodge Caravan

1 Answer

Had exhaust manifold replaced since then my 2001 caravan bucks and blows black smoke little to no power


if you replaced the manifold because it was cracked the look for a plugged cat convertor..the cracked manifold was probably letting the exhaust escape..now it builds too much back pressure

Jul 24, 2012 | 2001 Dodge Caravan

1 Answer

I can't find the o2 sensor on the 2005 dodge grand caravan. We changed the one on the catalytic convertor, but cannot locate the other o2 sensor. Please help with easy detailed description. Thanks


There is one in between the cat and the engine in the rear exhaust manifold and there is one right after the cat. The one in the rear exhaust manifold is not the easiest to see or change but it is there.

Jun 28, 2011 | 2005 Dodge Grand Caravan

1 Answer

Need to change the O2 sensor where is it exactly in a 1999 dodge caravan need a picture if possible


The O2 sensors should be on the exhaust system below the exhaust manifold. You will need a special socket with a slot in it to replace it. Be sure to spray WD-40 on it (WHEN IT IS COOLED OFF) to help loosen it.

Mar 16, 2011 | 1999 Dodge Caravan

1 Answer

How to change the back 3 spark plugs 98 dodge caravan 3.3


you have to remove the upper intake manifold

May 14, 2010 | 1998 Dodge Caravan

2 Answers

How to replace spark rear plugs?


The upper part of your intake manifold needs to be removed.I think Chilton lists spark plug replacement on your Caravan at something like 3 hours.

Mar 01, 2010 | 2000 Dodge Caravan

1 Answer

Idle is rough in gear at stop 98 caravan 3.3L


I HAVE A 96 DODGE CARAVAN WITH A 3.8L ENGINE..I HAD SIMILAR PROBLEM AND IT WAS THE UPPER INTAKE PLENUM GASKET HAD PIECE MISSING OUT OF IT..MISSING ON #5 CYLINDER AS WELL..GASKET WAS ONLY ABOUT 10 BUCKS AND I REPLACED IT IN ABOUT 30 MINUTES..TOOK ALL BOLTS OUT OF MANIFOLD AND JUST LIFTED IT UP HIGH ENOUGH TO GET OLD GASKET OUT..MIND YOU..I'M AN EXPERIENCED CHRYSLER TECH AND DO A LOT OF ENGINE WORK..SQUIRT SOME BRAKE CLEANER AROUND UPPER INTAKE AND SEE IF ENGINE SMOOTHES OUT..LET ME KNOW WHAT HAPPENS

Jun 13, 2009 | 1998 Dodge Caravan

1 Answer

My 1999 Dodge Caravan needs an exhaust


you are getting the royal screw you can get a can of PB Blast and spray the nuts and bolts and make sure you have on safety glasses so you do not get in the eyes and gloves on let set for a while before starting to remove the nuts and bolts and even if you break one off you can get a drill and a bit drill the old one out get a self tapper and put in a new bolt and try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 20, 2009 | 1999 Dodge Caravan

1 Answer

1999 dodge caravan


there are two both on the exhaust front one is up under the van on the rear exhaust manifold the second is on the exhaust pipe right after the catalytic converter

Feb 26, 2009 | 1999 Dodge Caravan

1 Answer

98 Tacoma exhaust manifold


the best way i know is to heat the bolts using asceteline and oxygen and then use an impact to break them loose.

Oct 07, 2008 | 1998 Toyota Tacoma

Not finding what you are looking for?
1998 Dodge Caravan Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...