Question about 1996 Geo Prizm

1 Answer

1996 geo prizm

How do I remove door lock from 1996 geo prizm

Posted by on

  • 4 more comments 
  • Anonymous Feb 10, 2009

    Geo prism 1996 can open door from inside, but can not open from out side. Lock was changed a couple years back, so should not be lock Can not get inside door panel off HELP

  • Anonymous Mar 13, 2014

    my car keeps sputtering then just stops on me what could be the promblem

  • Anonymous Mar 22, 2014

    Was running fine but now won't start

  • Anonymous Mar 22, 2014

    how to change out the rear struts on a 1991 Geo Prizm Car

  • Anonymous Mar 24, 2014

    then hard to start

  • Anonymous Mar 31, 2014

    location of the crank sensor

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 125 Answers

You'll have to pull off the interior panel. window in the up position. on the lock cylinder there is a clip that you have to pull off and an arm that actuates the lock. pop the lock out. reverse to install.

Posted on Sep 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Procedures on replacing clutch pressure plate and release bearing on 96 Geo Prizm 1.6 liter


Here are a couple of very detailed videos:
Rock Auto is your best source for parts. 1996 GEO PRIZM Clutch Kit

Jan 31, 2015 | 1996 Geo Prizm

1 Answer

How do you remove rear speaker covers in a 96 geo


are they fitted in the rear doors or the parcel shelf ,if there aree no visable screws to un do if door fitted then will have to remove the door panel , if on parcel shelf same thing if no screws visable then remove from underneath , hope this is of some help

Sep 29, 2014 | 1996 Geo Prizm

1 Answer

1996 geo prism rotor


ask a real question,
what engine is in car.
if dont know, be first to post a photo of it.
we be like shocked.!
the 96 had
a toyota 1.6L and a 1.8L engine (it's a corolla in drag)

Apr 05, 2014 | 1996 Geo Prizm

1 Answer

How to replace geo prizm 1996 drive axle


remove the large lock nut then release the lower ball joint then pull the knuckle back and remove the axle and pry the inner joint from the trans may need two bar to pry evenly

Jul 16, 2012 | 1996 Geo Prizm

1 Answer

1996 geo prizm. How do you remove the valve cover?


disconnect the vacum line or any other parts connected to it, remove the bolts at the bottem of the valve cover.

Dec 13, 2010 | 1996 Geo Prizm

1 Answer

97 Geo Prizm rear driver door lock


power actuator for lock is froze up must be replaced .

Apr 19, 2009 | 1996 Geo Prizm

1 Answer

Fuel Door Release not working


The car was parked in the sun, the release latch apparently thawed out and resumed working.

Jan 08, 2009 | 1996 Geo Prizm

Not finding what you are looking for?
1996 Geo Prizm Logo

Related Topics:

719 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...