Question about 1996 Lincoln Town Car

1 Answer

Door key pad code

Where can you find the door key pad code?

Posted by on

  • Anonymous May 08, 2009

    I need to change the door code on a 96 lincoln towncar, I have changed it once but need to do so again do i need the original # assigned and if so where do i find it and then how do i put a new code on it?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can find it inside the trunk on the hindge

Posted on Aug 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ive lost my key to my 2000 ford taurus my door has a num pad on it how do i reset it


Have to see the dealer & also have an owners manual
to change the codes to what you want on the door

Ignition keys you lost?

You should have at least three keys programmed to
the ignition key detector system (First)

Aug 01, 2014 | 2000 Ford Taurus

1 Answer

Just bought a 1999 ford explorer xlt don't have


You need a NGS (Ford factory scan tool) They can access the RAP KEYCODE PID.

Mar 07, 2012 | 1999 Ford Explorer

1 Answer

How do you re-program the security code on a 2007


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE)
KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-Some vehicles use 5 turns of the key instead of 8

Jun 05, 2010 | 2007 Ford Explorer Eddie Bauer

1 Answer

How can i program my door lock code or find out what it is. on my 2000 limited edition explorer


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed.
FORD KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-I found that some Explorer/Mountaineers enter program mode after 5 times-not 8.

Here is the link for further info.


http://www.2carpros.com/how_to/how_to_reprogram_key_remote_fob.htm


Your factory code is on a card in the owners manual. If that is lost, access the control module in the cargo area behind the left cover panel.

You MIGHT be able to see the code printed on it, or you might need to pull it out in order to see it.

May 27, 2010 | 2002 Ford Explorer

2 Answers

Code for door key pad


I take it you bought a used truck? Take it to a dealer and have them remove the old code and install a new one.

Jan 03, 2010 | 2001 Ford Excursion

1 Answer

Key pad door locks


Locksmith with the NGS Scanner! GoodLKuck!

Oct 05, 2009 | 2001 Ford Explorer Sport

2 Answers

The pad is long with five buttons, two numbers on each button. 1-0


No idea what your question is, but if you are asking what the pad on the door is, it is a code pad to unlock the doors, open the trunk etc. I don't know if they still do it, but Lincoln use to put the base code on the trunk. Look around for a tag stuck to the trunk arm, or trunk lid. When you enter the code it unlocks the doors and if you push other #'s after the code it will open the trunk, turn on lights etc.

Hope this helps.

Aug 28, 2009 | 2004 Lincoln LS

2 Answers

Using numbered key pad on drivers door


the code can not be changed.you will need a scanner to retrive the keyless code.sorry.

Oct 26, 2008 | 1995 Ford Taurus

1 Answer

1993 ford explorer


the keyless entry pad may be an add on from the dealer which was just stuck on therefore comtains a battery need to remove the door panel and check for wires from pad

Sep 14, 2008 | 1993 Ford Explorer Limited

Not finding what you are looking for?
1996 Lincoln Town Car Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...