Question about 2000 Dodge Dakota Quad Cab

2 Answers

2000 Dodge Dakota Quad Cab 4x4: The auxillery power outlet does not work. I have light tested all findable fuses and they are ok. I replaced the actual outlet in the dash and it still does not work. The diagrams on the fuse panel cover and the power dist. center do not specifally show which fuse goes to the 12v-20 amp outlet.Any suggestions?

Posted by on

  • Anonymous Sep 01, 2008

    the power outlet on my 2000 dakota is dead. I shorted it out with a bad plug. I've check all the fuses,all ok. under the hood on the left side is a electrial panel, in the panel are some cubes a little larger then dice. They are fuses.The one in location 14 is labeled 50 amp power outlet. My fuse checks out ok, but there is no voltage on the panel terminel for that fuse.

  • Anonymous Mar 03, 2009

    same on a 2001

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is a 10A & 20A fuse located under the dash on the BACK of the fuse box.
Replace the 20A and your done.

Posted on Dec 01, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

I would visually check all fuses first(pull each one at a time), and if still nothing then trace the wires from back of the outlet to the source because the wires that plug into the back of the fuse panel may have pulled loose. it is a pain in the **** but it sounds like that is what may have happened.
good luck!

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need a fuse diagram for a 2005 Dodge Dakota SLT Quad Cab 4x4


Look underneath the cover for the main fuse box under the hood. It should have a diagram for all the main fuses along with the sizes and the relays.

Jun 09, 2015 | 2005 Dodge Dakota Quad

1 Answer

My 2007 dakota 4x4 quad cab has erratic shifting problem


The bolt pattern for a 2007 Dodge Dakota Quad Cab should be depicted in a diagram on the owner's manual of your vehicle. You can access the owner's manual for your 2007 Dodge Dakota Quad Cab online at the Dodge website. ------------------------------------------------------------------------------
autel maxidas ds708

Nov 28, 2012 | Cars & Trucks

1 Answer

Have 2000 dodge dakota quad cab air conditioner quits


When you recharged the vehicle did you have it vacuumed?

Apr 09, 2010 | 2000 Dodge Dakota Quad Cab

1 Answer

My speedometer quit working and my antilock brake light is on. I am getting a PO500 code. I replaced the VSS with a new one no change in problem This is on a 2000 Dodge Dakota v-6 automatic 2wd


go to diferential,on center top its posible you find and speed sensor ok if its there,replace it,if it has antilock light on,it has a and antilock sensor problem ok,go to rear axle.

Nov 23, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

2000 dodge dakota quad cab 4x4 v8 air conditioning set on max stops coming out of the vents when accelerating or pulling a load and feels like it loses power, it doesn't do it on the next lowest setting....


Sounds like you are losing too much vacuum under acceleration. Possibly a partially stopped up converter, or bad intake manifold gasket. Possibly a bad door actuator in the heater box also, and the loss of power would be a seperate issue.

Aug 12, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

Speedometer dead!


Speed sensor is bad,It is located on the rear axle.
Once replaced,Make sure to reset the computer.

Please rate this a fixya

Feb 11, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

2000 dodge dakota sport blower motor won't work


Hi my name is Allen!

This is a very hard motor to get out!

This will save you time, if you have a test light and jumper cables, hook the jumper cables to the battery, then hook your test light to the positive side of the jumper cable, turn the ignition key on and turn the blower motor on. Next at the blower motor connector touch the test light to the negative side of the connector if the test light, lights up you have a good ground. NEXT; move the test light to the negative side of the jumper cable and test the positive side of the connector if it lights, you have power coming to the motor, if you have both power and ground you need to replace the motor, if no light on one side you need to repair the one that doesn't light up.

For further assistance contact me at FixYa!

Dec 21, 2008 | 2000 Dodge Dakota Quad Cab

Not finding what you are looking for?
2000 Dodge Dakota Quad Cab Logo

775 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...