Question about 1996 Dodge Neon

1 Answer

Ignition control module

I am tryint to find the location of the ignition control module for a 1996 Dodge Neon. I was driving down the road and the car just stopped (2.0 SOHC, manual trans). It wouldn't restart when I let the clutch out. I tried replacing the ignition coil, but still no spark.

Posted by on

  • 3 more comments 
  • ppcjs13 Jul 17, 2008

    My 1996 dodge neon with SOHC won't start. I replaced the crank sensor and the coils, and it still won't start it only has spark to two spark plugs

  • garnet7pet Jul 31, 2008

    Same problem. 96 neon. No spark on number 1 and 4. Replaced coil pack and pcm. No voltage to coil pack at 1 and 4 from pcm.

  • sportsnut212 Sep 25, 2008

    Going down the road and the engine cuts out and all intstruments drop. replaced the PCM and the car still jerks. Car has always started after it died on the road. Mine is a 1995 model but everything sounds really familiar

  • Anonymous Mar 29, 2014

    its missing and stalls when you come to a stop now it want start replaced the coil pack

  • Anonymous Mar 31, 2014

    Location of control module



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 2,039 Answers

Those car are bad for crank sensor there in the back of motor in the engine block check it out hope it help fixya our post thanks pierre

Posted on Jul 12, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where's the ignition module location on a 1997 Dodge Neon?

the ignition "control" module is internal to the engine control module. however the ignition coil is mounted right on top of the engine on the valve cover. don't forget to unlock the lock on the connector before unplugging it or you might break the connector trying to unplug it

Jul 28, 2015 | 1997 Dodge Neon

1 Answer

Location of ignition control module on a 2005 dodge neon

Hi Ricky,
It could be located inside the distributor, or mounted on bracket in the engine compartment or in the power train computer. What are your car symptoms? if it turns on, but as you're driving it turns off and it happens frequently; it could be the crankshaft position sensor. This was only suggestion that you might want to check out. I only paid $12.00 at auto zone for my crankshaft position sensor. Good luck and take care. :-)

Apr 18, 2014 | 2005 Dodge Neon

1 Answer

I accidently drove my 2000 Dodge neon through a big puddle while driving down the road. It stalled and would not start. I let it dry off and dried all of the electrical connections. It still would not...

Has anyone used a scanner to "watch" the computer interact with the sensors and ignition module ?
Are you lacking both spark and fuel pressure ?

Jul 31, 2013 | 2000 Dodge Neon

1 Answer

I have a 2004 dodge neon. i am having some transmission problems. it will shift into drive and reverse but when in drive it wont shift out of 1st gear. i looked in my book and it said that it could be the...

Yes, it could be the transmission control module or a shift solenoid in the transmission is plugged up or burnt out so it doesn't shift up.
Here is some info. about fuse locations on the 2004 Dodge Neon.

Circuit Protection Fuses Fuse block chry_car_neonfuseblock.gif

Fuse block fuse location chry_car_neonfuseblockfuselocchart.gif

Power Distribution Center (PDC) chry_car_neonpdc.gif

PDC fuse and relay location chry_car_neonpdcfuselocchart.gif

prev.gif next.gif

Oct 15, 2010 | 2004 Dodge Neon

1 Answer

Is there a distributor and rotor in the dodge neon 1996

no it is all electronicly controlled by a computer sending the signals to the ignition module

Mar 07, 2010 | 1996 Dodge Neon

1 Answer

Sorry where is the fuel filter on a 1996 dodge neon also my car cuts off while driving down the road what could it be

The fuel filter is under the car next to the gas tank on the passenger side

and with it shutting off could be all different types of reasons such as fuel pump,fuel filter,fuel injectors

Jul 07, 2009 | 1996 Dodge Neon

1 Answer

Daylight running module loction

remove the radio from the vehicle..with a trouble light,you should be able to see drl module just below opening..

Mar 24, 2009 | 1996 Dodge Neon

1 Answer

1996 neon hard to start when engine is warm

i had the same problem with my fiero the ignition module quits when it gets hot.

Nov 18, 2008 | 1995 Dodge Neon

Not finding what you are looking for?
1996 Dodge Neon Logo

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides