Question about 1999 Land Rover Discovery

3 Answers

DISCOVERY II 1999

HELLO EVERYONE HOPE SOMEBODY CAN HELP ME WITH MY PROBLEM, I HAVE A LAND ROVER DISCOVERY II YEAR 1999 AND NOT TO LONG AGO I NOTICE THAT 3 LIGHTS (ABS,TRACTION CONTROL AND DESCENDING CONTROL) ARE COMMING ON IN MY DASH EVERY TIME I DRIVE IT FOR A WHILE OR SLAM THE BRAKES, I HAD ALREADY SCAN THE CODES TO MAKE SURE THAT ALL SENSORS ARE FINE BUT ANYWAY IT KEEPS DOING IT ..PLEASE LET ME KNOW WHAT TO DO MY EMAIL IS manuelpot@hotmail.com thanks in advance.

Posted by on

  • 1 more comment 
  • fp928s Aug 05, 2008

    i have same problem

  • Anonymous Dec 04, 2008

    I am having the same problem with my 2002.

  • yrrag Jan 12, 2009

    the abs light, traction control light and hill decent light come on on my disco. ive changed the wheel bearing and sensor and it still stays on. can any one help?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 6 Answers

9 times out of 10 it is the ABS modulator for the disco II's. That being said, i hope you're sitting down...only a LR shop or a shop with auto logic can fix it and it's gonna cost you... A new modulator costs around 2k. if you can get the dealer to install a remanufactured one, it will cost you around 700 for the part and about 3-4 hours of labor.

Posted on Mar 14, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Maybe you problem with the abs modulator ,im a LR tech and most problem with the abs are tha modulator or some wheel speed sensor.

Posted on Mar 05, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Abs sensors/hub bearing assembly worn check wheel bearing freeplay

Posted on Oct 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key programming


I believe you have to have the keys programmed by the dealer. I can't be absolutely sure of the 2001 model year but later years require dealer programming.

Dec 01, 2013 | 2001 Land Rover Discovery Series II

1 Answer

Land Rover Discovery II 1999 will go in reverse but not forward. Noticed leakage of transmission fluid.


Check transmission fliuid level.
Transmissions work by having proper pressures. If the fluid level is too low there will not be enough pressure to engage it in gear.
Then find your leak and fix it.

Jul 01, 2011 | Land Rover Discovery Cars & Trucks

1 Answer

I need a diagram of the firing order for spark plug coil, landrover discovery 2002


2002 Land Rover Discovery II 4.0 liter V-8

67710da.gif

Hope this helps (remember rated this).

Jul 07, 2010 | 2002 Land Rover Discovery Series II

1 Answer

Where is my fuel filter located on my 1999 land rover discovery 11 i just bought?


If your vehicle is a Discovery Series II, it is not equipped with a fuel filter. If it is a Discovery Series I it is in the right rear wheel well towards the front. Hope this helps out.

Best of Luck

May 31, 2010 | 1999 Land Rover Discovery

1 Answer

1999 Land Rover Discovery II engine miss


Observe the engine running in the dark to see if there are any spark jumps from the wires or coil, you may have a carbon track.....

Feb 16, 2010 | 2001 Land Rover Discovery Series II

1 Answer

Default code P1451 Land Rover Discovery II


The code P1451 on a Land Rover is "Leakage Detection Module Motor power stage error Drive cycle A:Signal out of range - above maximum". This is an OBD-II diagnostic system code. As far as I know, a 1995 Land Rover Discovery does not use a OBD-II system. Is it possible that this rover is a later model year

Oct 11, 2009 | 1995 Land Rover Discovery

1 Answer

Part number for a discovery 2 td5 clutch master cylinder


Land Rover Discovery Series 2 TD Clutch Master Cylinder
Free, Land Rover Workshop Manual CD with this item

2b21f35.jpg

Land Rover Part Number: STC000280

Another reference: HERE

I hope help you with this.

Sep 01, 2009 | 1999 Land Rover Discovery

1 Answer

Transfer case oil change- 1999 Land Rover Discovery II


No need for a diagram, to drain the oil, there's a drain plug on the bottom of the transfer box, under the handbrake drum. To fill, the fill plug is about in line with the centre of the handbrake drum and to the left. I think both plugs are 1/2" square. Fill to overflow with Texaco Multi-Gear 75W/90R. Takes about 2L or so.

Mar 29, 2009 | 1999 Land Rover Discovery

2 Answers

Fuse box location


Hi...
Depend on the year of your car.
But for EXAMPLE. 2000 discovery II
One FUSE BOX is Front Right side of engine compartment
One FUSE BOX is Left side of the dash, inside of the vehicle.
one FUSE BOX is Under the driver seat.
One FUSE BOX is under the passanger seat.

OK... I hope this help. But if not.
GIVE ME THE CORRECT YEAR OF YUOR VEHICLE,
and I will give the exacttly location of the Fuses.

Aug 13, 2008 | 1999 Land Rover Discovery

Not finding what you are looking for?
1999 Land Rover Discovery Logo

595 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...