Question about 1992 Toyota Camry V6

1 Answer

92 camry 2.2 liter 5S-FE

I'm trying to determine what voltage I should see going to the ignitor with the key turned on?

bert

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,039 Answers

The same as our battery if you dont that mean corroded wire check it out let me no hope it help fixya our post pierre

Posted on Jul 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota Camry 1993 4 cyl water pump failing, have removed thermostat, considering Electric inline pump as replacement as option ? Please advise me of pro's and con's.


i owned the 1995 4 cyl wide body camry till the cooling system failed in heavy traffic and over heat stripped out the head bolt threads in the block

the toyota camry engine designation is a 5S-FE

water pump is driven by timing belt
behind timing belt covers
they have to be removed to get to the water pump

normally timing belt, seals ,tension er pully and water pump are replaced at the same time ..comes in a kit

i dont have the 5S-FE cooling system hot under pressure specs

so I cant answer which inline electric pump pressure is required to work on the 5S-FE


engine repair manual free download pdf
5S-FE 431 pages
http://www.turboninjas.com/camry/eg1.pdf
ENGINE MECHANICAL to page 144
EMISSION CONTROL SYSTEMS
MFI/SFI SYSTEM page 164
COOLING SYSTEM page 238
LUBRICATION SYSTEM page 268
DIAGNOSIS SYSTEM page 296
CIRCUIT INSPECTION page 336
water pump as a part

timing belt water pump kit
water pump
,location on the engine with timing covers removed


e7622159-98af-4a83-8989-bd6dd48bcde3.jpg26279563-dp42dlzfhn4dbdhi1rc14q4e-1-2.jpg26279563-dp42dlzfhn4dbdhi1rc14q4e-1-3.jpg

Sep 10, 2016 | 1993 Toyota Camry

1 Answer

Where do i find the 31 vaf sensor curcuit on a 4s camry engine


Toyota Camry Cressida OBD Trouble Codes -

www.troublecodes.net/toyota/toyota-camry-cressida/
Get Help at BAT Auto · Get an ALLDATAdiy Repair Info Subscription ... Toyota Camryand Cressida have two separate diagnostic connectors and two separate diagnostic modes which both provide ... 92-95 Camry 2.2L Engine Code: 5S-FE ... 31, Volume air flow (VAF) sensor-Cressida -circuit, Wiring, VAF sensor, ECM.

Nov 13, 2015 | 1998 Toyota MARK II

1 Answer

1996 toyota camry 2.2 5s- too manny timing marks crank shaft,cam shaft and cam shaft gears


Hi there:I dont have this diagram for 2S-ELC, 3S-FE and 5S-FE Engines, but pay attention at this...
To install:
  1. Align the cutouts of the oil pump pulley and shaft, and slide the pulley on. Retain the pulley while tightening the nut to 21 ft. lbs. (28 Nm).
  2. Align the crankshaft timing pulley set key with the key groove of the crankshaft pulley, then slide the pulley on.
  3. Install the No. 2 idler pulley with the bolt and tighten to 31 ft. lbs. (42 Nm). Be sure the pulley moves smoothly.

Remove any oil or water on the idler pulley and keep it clean.

  1. Temporarily install the No. 1 idler pulley with the retaining bolt. Hint: use a 1.65 inch (42mm) bolt in length. Do not tighten the bolt yet. Install the tension spring. Pry the pulley toward the left as far as it will go, then tighten the bolt.
  2. Turn the crankshaft until the key groove in the crankshaft timing pulley is facing upward. Install the timing belt on the crankshaft timing, oil pump, No. 2 idler and water pump pulleys.

If the old timing belt is being reinstalled, make sure the directional arrow is facing in the original direction and that the belt and crankshaft gear matchmarks are properly aligned.

  1. Install the lower (No. 1) timing belt cover and new gasket with the four bolts.
  2. Align the crankshaft pulley set key with the pulley key groove. Install the pulley. Tighten the pulley bolt to 80 ft. lbs. (108 Nm).
  3. On 2S-ELC engines, turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  4. Align the camshaft knock pin with the matchmarks on the oil seal retainer.
  5. On 2S-ELC/USA engines, align the knock pin with the pin hole on the timing pulley E mark side. On 2S-ELC/Canadian engines, align the knock pin with the pin hole on the timing pulley. On 3S-FE and 5S-FE engines, align the knock pin with the groove of the pulley, and slide the pulley onto the camshaft with the plate washer and set bolt.

On 2S-ELC engines, make sure that the Matchmark on the oil seal retainer and center hole of the small hole on the camshaft timing pulley are aligned.

  1. Using the removal tool to hold the pulley stationary, install and tighten the pulley set bolt to 40 ft. lbs. (54 Nm) on the 2S-ELC and the 3S-FE. On the 5S-FE, tighten the set bolt to 27 ft. lbs. (37 Nm).
  2. On 3S-FE and 5S-FE engines, turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  3. Install the timing belt and check the valve timing as follows:
    1. Align the matchmarks that you made previously, and install the timing belt onto the camshaft pulley.
    2. Loosen the No. 1 idler pulley set bolt 1 / 2 turn.
    3. Turn the crankshaft pulley two complete revolutions TDC to TDC. ALWAYS turn the crankshaft CLOCKWISE. Check that the pulleys are still in alignment with the timing marks.
    4. Tighten the No. 1 idler pulley set bolt to 31 ft. lbs. (42 Nm).
    5. Make sure there is belt tension between the crankshaft and camshaft timing pulleys.

  4. Install the upper (No. 2) timing cover with a new gasket(s). On the 5S-FE, align the two clamps for the engine wiring harness with the cover mounting bolts.
  5. Install the spark plugs.
  6. Install the right mounting insulator with bracket. Tighten the bracket bolts to 38 ft. lbs. (52 Nm), insulator nuts to 38 ft. lbs. (52 Nm) and thru-bolt to 52 ft. lbs. (71 Nm). On the 5S-FE, install the No. 2 engine mount bracket and tighten to 38 ft. lbs. (52 Nm); install the control rod and tighten the bolts to 47 ft. lbs. (64 Nm).
  7. Lower the engine.
  8. On 3S-FE and 5S-FE engines, install the alternator and alternator bracket. On 2S-ELC engines, install the power steering reservoir tank.
  9. Install the drive belt and adjust the tension.
  10. Install the cruise control actuator with bracket.
  11. Install the fender apron seal and right engine under cover.
  12. Install the right front wheel.


Hope this helps.

Jun 12, 2012 | Toyota Cars & Trucks

1 Answer

Have 2001 camry, 2.2 engine, whit is the firing order and coil placement, is coil 2-3 on the front side and 1-4 on the back


2001 Toyota Camry LE Sedan 2.2 liter DOHC L4 (5S-FE)

10_19_2011_7_45_49_pm.gif


Hope this helps; just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Jose.

Oct 19, 2011 | 2001 Toyota Camry

1 Answer

Whats the part number for a 95 camry timing belt is it 94167 (163stp8m267) thanks for ya assitance


3.0 Liter V6 engine use Dayco 95257
2.2 Liter 4 cyc engine use Dayco 95199

======== 94167 is an old Deyco Euro part #
It will fit the following
Toyota Camry 2.0 i 1996 3S-FE Petrol 10/86-06/91


Toyota Camry 2.0 i 16V 1998 3S-FE Petrol 10/86-06/91


Toyota Camry 2.2 i 16V 2164 5S-FE Petrol 06/91-07/01


Toyota Carina E 2.0 i 16V 1998 3S-FE Petrol 02/92-10/97


Toyota Carina E 2.0 i 16V 1998 3S-FE Petrol 02/92-10/97


Jul 31, 2011 | Toyota Camry Cars & Trucks

1 Answer

What are the timing marks for a 1996 toyota camry, 2.2


2S-ELC, 3S-FE and 5S-FE Engines

When install,
align the crankshaft pulley set key with the pulley key groove. Install the pulley. Tighten the pulley bolt to 80 ft. lbs. (108 Nm).

On 2S-ELC engines, turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
Align the camshaft knock pin with the matchmarks on the oil seal retainer.

On 2S-ELC/USA engines, align the knock pin with the pin hole on the timing pulley E mark side. On 2S-ELC/Canadian engines, align the knock pin with the pin hole on the timing pulley.

On 3S-FE and 5S-FE engines, align the knock pin with the groove of the pulley, and slide the pulley onto the camshaft with the plate washer and set bolt.



Apr 29, 2011 | 1996 Toyota Camry

1 Answer

CUAL ES LA POSICION CORRECTA DE LAS MANGUERAS DE VACIO DE TOYOTA CAMRY 5S 95


Click over pics for zoom...

zjlimited_955.jpg

Fig. 8: Emission control system-1992-95 California 5S-FE engine


zjlimited_956.jpg

Fig. 9: Emission control system-1992-95 except California 5S-FE engine

Good luck.

Mar 31, 2011 | 1995 Toyota Camry

1 Answer

Firing order diagram for 98 toyota camry


1998 Toyota Camry 2.2 liter DOHC L4 (5S-FE)

85f8d42.gif



1998 Toyota Camry CE Sedan 3.0 liter DOHC V-6 (1MZ-FE)

bd2a436.gif


Hope helps (remember comment and rates this).

Jul 22, 2010 | 1998 Toyota Camry

3 Answers

I need a spark plug wire diagram for a 1992 Toyota Camry 4 cylinder


1992 Toyota Camry Sedan
3.0 liter DOHC V-6 (3VZ-FE)

Cylinder # Front, passenger to drivers side 2-4-6
Cylinder # Back, passenger to drivers side 1-3-5

Distributor 12 O'clock post # 6 cylinder
10 O'clock post #1 cylinder
8 O'clock post #2 cylinder
6 O'clock post #3 cylinder
4 O'clock post #4 cylinder
2 O'clock post #5 cylinder

Good luck and hope this helps.

Jan 12, 2010 | 1992 Toyota Camry V6

2 Answers

No spark/no fuel.1995 toy. camry 2.2 5S=FE


The BONNET is the hood, You must have talked to someone from ENGLAND. The fuse may blow if the coil or the igniter is shorted. Turn the key on and disconnect the igniter and coil, then hook up each one and see when the fuse blows.

Nov 23, 2009 | Toyota Camry Cars & Trucks

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...