Question about 1993 Mercedes-Benz Mercedes Benz 300 Class
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 21, 2015 | Audi Cars & Trucks
May 08, 2014 | 2000 Dodge Stratus
Jun 23, 2012 | 1993 Lexus Es 300
Nov 03, 2011 | 1993 Mercedes-Benz Mercedes Benz 400 Class
Cylinder head bolt tightening sequence - 1993-97
Remove the head from the engine. If prying is necessary, use a protected blade; take great care not to damage the mating surfaces of the head and block.
Clean the head and block of all gasket material. Take great care not to gouge or scratch the mating surfaces.
Place a new gasket on the cylinder block. Make sure it is positioned correctly. Install the cylinder head in position.
Lightly coat the head bolt threads and plate washers with engine oil. Install the bolts in the head.
Uniformly tighten the head bolts in several passes in sequence, to 25 ft. lbs. (34 Nm).
Mark the front of each bolt with a dot of paint. Following the correct order, tighten each bolt an additional 90 degrees. When complete, all the paint marks should face to the side of the engine.
Again following the correct order, tighten the bolts another 90 degrees of rotation. When complete, the paint marks should face the rear of the engine, exactly 180 degrees away from the original starting point. Correct bolt torque is expressed as 25 ft. lbs. (34 Nm) + 90° + 90°.
Jan 07, 2011 | 1994 Lexus GS 300
Jun 14, 2010 | 1989 Mercedes-Benz 300-Class
Sep 28, 2009 | 1991 Mercedes-Benz 300 Diesel
May 16, 2009 | 1985 Mercedes-Benz 300
Apr 02, 2009 | 1993 Isuzu Trooper
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: