Question about 2007 Toyota Camry

1 Answer

Gauge cluster lights

The entire gauge cluster lights always lit up when I first bought my 2007 Camry while the car is running. Just this week my husband noticed that at night when we turn on the headlights, the entire gauge cluster lights go off and we can't see anything on the display. Do you know what may be wrong with it and how we can get it fixed?

Posted by on

  • 1god Jul 17, 2008

    Yes, I called the dealership and that's what they told me. Thanks anyway. Your solution was correct.

  • 1god Jul 17, 2008

    Yes, I called the dealership and that's what they told me. Thanks anyway. Your solution was correct.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

You should have a dimmer switch that increases or decreases the amount of light that the dash produces. This should be located to the right of the steering wheel. It is a wheel that goes up or down. I believe on your model you can slide the switch all the way up, and you will feel a click, and that should be the brightest setting.

Let me know what you find out!

Brian

Posted on Jul 14, 2008

  • Brian Berndt
    Brian Berndt Jul 18, 2008

    Thanks for the reply!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have toyota camry 2005 its tachometer gauge is not working and over speed light is on


did you check fuse yet.
did you scan the PCM yet,
if RPM i ok in the PCM scan its, then it's OK.
no DTCs stored? any sensors on engine..
also the right scan tool can do the full TOY extended DTC check
for other DTCs, like "BCM/PCM cant talk to CLUSTER HEAD?)"

scan it first and wonder 2nd. always.

Feb 17, 2014 | 2007 Toyota Camry

2 Answers

Key gauge lights up and stays lit while other gauge lights go off/on intermittently. Jeep seemingly runs fine, power windows work, radio works. What to do!


If it is a warning light shaped like a door key, it could be the warning light for the security system. Its telling you there is a problem with the chip in your key or the sensor in the lock cylinder.
Your owner's manual should show all of the warning lights and what they mean.

Dec 18, 2012 | 2000 Jeep Grand Cherokee

1 Answer

My change oil light soon light won't go off. My oil and filter were changed 2 weeks ago and my husband forgot to reset it in our 2007 Suzuki XL7. We just bought this car a month ago and the oil li


it wont go away because their is a mechanical problem and or problem with oil change [ not enough oil wrong filter etc ] will need to have vehicle scanned for the fault code to determine the problem most auto stores offer this service for free

May 17, 2017 | 2007 Suzuki XL7 AWD

1 Answer

2002 Toyota Camry Stalls when accelerator pedal is released


You lost the idle leaning, so just drive it until the idle relearns.

Mar 15, 2017 | 2002 Toyota Camry

1 Answer

My dash lights sometimes will not work at night on my 2007 tahoe , the odometer light and shifter light work as well as doors , ac , radio , the instrument cluster is not back lit. It will sometimes work...


{: ) I supposed you have checked the fuses at the IP fuseblock and tried adjusting the dimmer knobs back and forth. You can also try to check the cluster connector behind ( although not likely to be the cause). If the illuminations or backlighting works fine on other areas except the cluster, and gauges functions are fine, you will need to replace IPC (cluster) and program. Actually there is a GM bulletin for this kind of concern for the 2007 IPC poor backlighting. The IPC should be replaced with a 2008 hardware/software.

Jul 23, 2011 | 2007 Chevrolet Tahoe

1 Answer

Nissan pulsar n13 fautly water temp gauge


Switch ig. on, ground the sender unit wire for about 3 seconds see if the temp. gauge moves, if so change sender unit, if not then it is a faulty gauge reader.also check instrument voltage stabilizer.

Dec 23, 2008 | 1988 Nissan Pulsar

1 Answer

Instrument cluster damaged after battery shorted out.


4 resistors on the back of cluster bad get them at radio shack.

Dec 14, 2008 | 1998 Buick Regal

1 Answer

2000 Jeep Wrangler Check Gauges Light on


If the alt.is bd, it will make your dash go crazy because now your running only on battery power. Not enough volts to run every electrical items

Nov 13, 2008 | 1998 Jeep Wrangler

1 Answer

Flashing Airbag light


When you disconnected the battery you set a code in the airbag diagnostic module (loss of system voltage), you will have ot manually clear the code out to turn out the light.

Nov 12, 2008 | 1998 Ford Mustang

1 Answer

Gas gauge no longer works


The light behind myRemove the cluster bezel from the instrument panel. See Cluster Bezel in this group for the procedures.
Remove the four screws that secure the instrument cluster to the instrument panel Instrument Cluster Remove/Install
Pull the instrument cluster rearward to disengage the two self-docking wire harness connectors
NOTE: The instrument cluster has two self-docking wire harness connectors that will be automatically aligned with, and connected to the instrument panel wire harness when the cluster is installed in the instrument panel.
Remove the instrument cluster from the vehicle.
Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N·m (20 in. lbs.)
when I turn my headlights on. All the other gauges are lit, but not the gas gauge. How do I get in there to replace the bulb and fix this? Or is it a fuse problem? I have a 1998 jeep scout Thanks

May 14, 2008 | 2007 Jeep Scout

Not finding what you are looking for?
2007 Toyota Camry Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7268 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...