Question about 1994 Pontiac Grand Am

Open Question

Multi-Function Alarm Module

I need a part # for this module,cause the dealer wont help til I get a #.Please help,Frustrated

Posted by on

  • yadayada
    yadayada May 11, 2010

    The dealer needs the number off the old part because there is more than one part number for your car, this happens often, so you will have to get that number.


5 Suggested Answers

  • 63483 Answers

SOURCE: ignition module

the ignition module provides a signal to the coil at the proper time to fire the spark plugs and ignite the fuel in the cylinders. Have u had this system tested for trouble codes? when exactly does it stall?

Posted on Mar 22, 2009

  • 776 Answers

SOURCE: Alarm module fried 2002 Hyundai Sonata

Why did you fry the Alarm System?... Everything you described is controlled by the ETACS module.

91b2a46.jpg adf7aba.jpg fb8f850.jpg Replace the module

Posted on Jun 05, 2009

  • 26 Answers

SOURCE: I lost my keys and alarm remote to my 96 saab

email me at

i can show you how to re-wire it yourself.

Posted on Apr 22, 2010

  • 78 Answers

SOURCE: I have airbage light on 2003 Beetle. Dealer says

take a look at

They're working in Airbag-Simulators and Occupancy Sensor-Simulators.



Posted on Aug 17, 2010

  • 7693 Answers

SOURCE: need pictures of fan cooling module and mil and where to look

Relay Driven Dual Cooling Fan Diagnostics

Posted on Sep 06, 2016

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My volkswagon passat shut off while driving

maybe--shuttn off can be caused by many things-nevr replace parts til u pinpoint--a scan thatruns a data stream showing numbers is paramount--do this at a mechanic with expensive gear--dealers dont do it rite----bad fuel pumps wont show up--have u kept up with preventive maintenance-like new plug wires or aircleaner.....cud be somethin simple-getta manual at a parts store

Jul 01, 2013 | Cars & Trucks

2 Answers

Codes p1571 and p1689 coming up and my t/c light is on and want go off

Google the OBD Codes

2003 GMC Yukon OBD Code P1571 & P1689

Mar 27, 2013 | 2003 GMC Yukon

1 Answer

Front wipers stop working

I know of no recall. This is not acoomon problem. I would think that maybe the Body Control Module is defective it controls the wiper motor.

Oct 27, 2012 | 2010 Dodge Caliber

2 Answers

96 Dodge Runs fine but after warms up it dies,cools n will crank n run good then dies again after warming up.

if you dont know anything about cars then take it to a dealer as it will be cheaper in the long run

Apr 08, 2012 | Dodge Cars & Trucks

1 Answer

Changed out Many parts and still truck is DEAD!


Sep 18, 2009 | 1997 Ford F150 Regular Cab

1 Answer

My 97 Grand Cherokee Laredo has the display screen for service and notification of low fluids and shows the jeep body. It tells me how many miles til my next service and so forth. I was wondering what...

The most likely cause of something like this in a Chrysler vehicle is a faulty Body Control Module (BCM.) I believe on the Grand Cherokee, it's located under the driver-side instrument panel. It will likely have to be replaced, but you may want to contact the dealer to see if re-programming the BCM might help it. These modules aren't cheap, unfortunately!

I hope this helps! :)

Aug 31, 2009 | 1997 Jeep Grand Cherokee

3 Answers

Dodge nitro wont start or turn over. The battery checks out ok. what could be causing problem??

Is this an intermitting problem only occure during dry and cold weather?
Behind the ignition key lock there is a module call Wireless Control Module (WCM). When this module is zap by static eletricity build up during cold weather (via the key). It will hang just like you computer.
As a test please please touch the key to a metal object to discharge the static on the key before insert it into the ignition.
If the problem stop complete then you can take it to the Dodge dealer the arrange service on the Wireless Control Module (WCM) or wire for better grounding.

Apr 11, 2009 | 2007 Dodge Nitro R/T New Cars

2 Answers

My chevy drives for 45mins then shuts off

Your ignition module is bad. Known to stop working when it gets hot and work again after it cools off. Replace it. Good luck

Feb 10, 2009 | 2001 Chevrolet Blazer

1 Answer

Whiledriving the revs drop, and there is no drive, then stalls

Well it's possible that when the mechanic sprayed your engine he may have also used cold water or lukewarm water to rinse it. Or the silicone itself was cold coming from the can. If the coil/coil packs were hot at the time, or the ignition module was, it is likely that the cold liquid(s) spraying on the hot electronics may have cracked either the coil magnet or the ignition module causing them to fail. Repeated misfiring from damaged coils or ignition modules can cause failure at the rotor and distributor cap by constant crossfiring inside. You'll want to remove the distributor cap and look inside for evidence of burnt, broken, or cracked electrodes. If they appear blackened or melted/burnt you will definitely need to replace the cap and rotor. Before replacing them however, you may want to take a close look at your coil or coil packs and the ignition module. One way to check the coil to see if it is cracked is this: Place the vehicle in a darkened area or wait til it is dark out if you can't move it. Since the vehicle isn't running everything should be cold so this test won't damage anything any further. Fill a spray bottle with warm water. Spray a mist of water on the coil. Have an assistant crank the engine and watch in the dark the area of the coil. If you see a lot of arcing or a halo like effect of electricity you will know the coil magnet is likely damaged. If not, it is probably ok but you'll want to have the ignition control module tested. You can probably have this done at a reputable parts dealer or garage who have the correct electronic test devices. If both the coil and the ignition control module check out ok, go ahead and replace your cap and rotor then try starting her up. Anything that tests bad obviously must be replaced first to get it running and to prevent further damage to the ignition system. If you are getting no spark it is most likely the coil, second most likely the ignition control module. Good luck and let me know how it goes.

Jan 20, 2009 | 1991 Mazda 323

Not finding what you are looking for?
1994 Pontiac Grand Am Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides