Question about 1995 Oldsmobile Cutlass Supreme

1 Answer

Break lights turn lights and flashers and running lights all work, no break lights. waht could be the problem?

Posted by on

  • mvmilito Jul 12, 2008

    Same issue on my car. All the connections are good.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 327 Answers

Welcome to fixya

there is a break switch under the dash connected to the break itself once you press the break the switch trips and the lights go on it sounds like that switch is gone you need to replace

hope this helps you out have a good day

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver Side Rear Tail lights: running, brake & turn signal do not work. The ground connection is functionind at the lights sockets. The resistance .3 ohms black wire at each light socket to chassis...


I suggtes test the "brake light switch", generally, is located in backside of break pedal. With the flasher unit, just replace it.

Keep us updated.

Feb 14, 2011 | 2004 Pontiac Grand Prix

2 Answers

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did...


the turn signal flasher is a small canister-shaped or rectangular unit located under the dash, either in a clip adjacent to the steering column or in the convenience center which is located located under the right side of the dashboard and houses relays and other components. The fuse.faulty flasher unit a broken switch or a loose or open wire. We have eliminated the switch, I would check all fuses inside and out, you can replace the flasher with the hazard flasher as if I remember correctly they are the same shape and size, then it is just a matter with a tester light running it from the column to the sockets and finding the break. Hope this helps Tim

Oct 31, 2010 | 1990 Buick LeSabre

1 Answer

My gmc savana 2005 break and turn signal lights don't work. It started with the pasenger rear fuse kept blowing then I put a 25 wat fuse in the slot that should have a 10 what now none of the front ,back...


check flasher fuse #14, ign E fuse #22, and stoplamp fuse, if all this ok see the problem at turn signal/hazard flasher module located at lower part of instrument panel behind the knee bolster

Aug 09, 2010 | GMC Savana Cars & Trucks

2 Answers

Signal lights not working, replaced fuse, still not working, what now?


ck out flasher,,also click on four way flasher to see if it works & all the light work,,then replace signal flasher,,

Feb 13, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

My blinkers and break lights are not working in my 1997 cavalier


I had the same problem, I'm not sure why this works.......but try turning on the emergency flashers. For reasons unknown, the emergency flashers should still work even if your lights do not. Now turn the flashers off and try your break lights and turn signals.


~Andrew

Jul 08, 2009 | 1997 Chevrolet Cavalier

1 Answer

Passenger side turn signal not working on 2003 Toyota 4Runner


right above your left hand foot if your not a brit in the UK or so.
Some cars have 2 units. Simple short test with a mulimeter will point out which one or both or other problem.

Apr 01, 2009 | 2003 Toyota 4Runner

1 Answer

My flasher work but brake light not work just roof lighting went aply brake


Chk. fuse, emergency flashers, and middle break light, and the other break lights are on seperate curcit (a fuse for each), if fuse is ok than it could be break light switch, witch is located under dash on steering colume and works off break peddel arm.

Mar 28, 2009 | 1998 Chevrolet Blazer

1 Answer

I have an interesting problem with my 01 Passat. The turn signals are not working, however the hazards are working. Could this be the hazard relay? The high beam on the right side is not working, and today...


The turn signals use one flasher and emergency uses another one. You can exchange the two (usually) for a quick check. The bad one will move to the other system when swapped, emergency flashers now don't work but the turn signals do. If this is the case go get a new flasher and replace it.

Mar 06, 2009 | 1998 Volkswagen Passat

2 Answers

BREAK LIGHTS WON'T WORK, FUSE IS GOOD, TURN, PARK, FLASHERS WORK - BREAK LIGHT IN REAR WINDOW WORKS


did you try changing bulbs even though your turn and flashers work these are dual-element bulbs with the brake being on separate element hope this helps

Sep 05, 2008 | 1996 Buick Regal Olympic Gold

Not finding what you are looking for?
1995 Oldsmobile Cutlass Supreme Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...