Hi, when you trun key on is the anti-theft light blinking. re post and let me know thanks
no theft light won't pick up anything on snap-on computer no codes
have you check to see if car is firing when you are trying to re start car. I know you said you replace pump and filter , but you can disconnect the air intake at throttle body and spray some starting fluid in and see if it will run more then two sec. let me know what happens from there we can go further. also you can just poor gas in throttle body.
×
Hello
The engine
and transmission in this cars drive train are fully
electronically controlled by a computer called the PCM (Power Train
Control Module). Whenever a problem like this occurs the computer
stores a record of the problem (there are of course some exceptions
to this, like the fuel pump for instance) in the form of a fault code
in its memory, to read these fault codes you must have the systems
memory scanned with a special tool. Once the fault code(s) are read
you then must perform the appropriate diagnostic testing to find and
resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL THE
DIAGNOSIS & TESTING IS COMPLETED.
334 views
Usually answered in minutes!
×