Question about 2001 Ford Ranger Regular Cab

1 Answer

Daytime running lights

My daytime running lights on my 2001 Ranger 3L are flashing all the time. The only way to stop the flashing is to turn on my headlamp switch. What could be the problem??

Posted by on

  • ebear914 Aug 10, 2008

    I found the DRL control module was faulty it is located just inside the front fender on the left side.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

The light sensor that tells lights when to come on that is located on dash is having problems

Posted on Aug 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my name is Larry I have a 1998 Pontiac sunfire & my problem that I have is I have low beam. But no high beam.


It's probably the switch , but testing to know for sure is alwasy a good idea .

Headlamps Inoperative - High Beams
Step
Action
Value(s)
Yes
No
1
Did you perform the Daytime Running Lamps (DRL) System Check?
--
YES - Go to Step 2
NO - Go to Daytime Running Lights (DRL) System Check
2
Disconnect the turn/hazard headlamp switch connector C1.
Connect a fused jumper between terminal B of the turn/hazard headlamp switch assembly harness connector C1 and ground.
Do the high beam headlamps operate?
--
YES - Go to Step 3
NO - Go to Step 4
3
Replace the turn/hazard headlamp switch assembly.
Did you complete the repair?
--
Go to Daytime Running Lights (DRL) System Check
--
4
Repair the open in CKT 1200 between the turn/hazard headlamp switch assembly. Refer to Wiring Repairs in Wiring Systems.
Did you complete the repair?

Daytime Running Lights (DRL) System Check
Step
Action
Normal Result(s)
Abnormal Result(s)*
1
Turn the headlamp switch to the HEAD position.
Turn the headlamp dimmer switch to the LOW position.
The low beam headlamps are ON.
The high beam headlamps are OFF.
Headlamps Inoperative - Low Beams
2
Turn the headlamp switch to the HIGH position.
The high beam headlamps are ON.
The high beam indicator is ON.
The low beam headlamps are OFF.
Headlamps Inoperative - High Beams
3
Turn the headlamp switch OFF.
Turn the ignition to ON.
Disengage the parking brake.
The high beam headlamps come ON at a reduced intensity in approximately 30 seconds.
Daytime Running Lamps (DRL) Inoperative, Headlamp Switch Operates Normally
* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.

Jan 13, 2017 | 1998 Pontiac Sunfire

1 Answer

Where is the fuse located for the daytime running lights on a 2005 Chev Siveraado?


It is located in the underhood fuse/relay box , marked DRL 10 amp fuse ! Also if that is good check the DRL relay in the same fuse/relay box .Your light sensor could also be bad .
The daytime running lamps (DRL) will operate when the ignition switch is in the RUN position, for automatic transmissions (A/T), the gear selector is not in the PARK position, the headlamp switch is in the AUTO position, and for manual transmissions (M/T), the park brake is released. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate. The ambient light sensor is a light sensitive transistor that varies its voltage signal to the body control module (BCM) in response to changes to the outside (ambient) light level. When the BCM receives this signal it will either turn on the DRL or the headlamps for auto headlamp operation. Any function or condition that turns on the headlights will cancel the daytime running lamps operation. The DRL can be manually turned OFF by depressing the AHL/DRL switch in the headlamp switch
Do you know that on inside of fuse box lid it shows what fuse is what .

Feb 01, 2016 | 2005 Chevrolet Silverado

2 Answers

All of my running lights and blinkers work and high beams but no low beams on my 1997 Chevrolet TahoeA


Headlamps Inoperative - Low Beams

Step

Action

Value(s)

Yes

No

DEFINITION: This diagnostic procedure should only be used if the high beam headlamps are operating properly and the low beams are inoperative.

1

Did you perform the Headlights System Check?
--
Go to Step 2
Go to Headlight System Check

2

  1. Turn the headlamp and panel dimmer switch to the ON position.
  2. Move the headlamp dimmer switch to the LOW position.
  3. Backprobe the headlamp dimmer switch connector with a J 35616-200 from cavity A to ground.

Does the test lamp light?
--
Go to Step 3
Go to Step 5

3

  1. Remove the daytime running lamp relay.
  2. Connect a J 35616-200 at cavity G5 to ground.

Does the test lamp light?
--
Go to Step 4
Go to Step 6

4

  1. Re-install the daytime running lamp relay.
  2. Backprobe cavity B at the high/low beam headlamp with the headlamp dimmer switch in the LOW position.

Does the test lamp light?
--
Go to Step 7
Go to Step 8

5

Replace the headlamp dimmer switch.

Is the repair complete?
--
Go to Headlight System Check
--

6

Repair the open in CKT 359 (PPL) between the headlamp dimmer switch and the daytime running lamp relay.

Is the repair complete?
--
Go to Headlight System Check
--

7

Replace the high/low beam headlamps.

Is the repair complete?
--
Go to Headlight System Check
--

8

  1. Inspect for an open in CKT 12 (TAN) between the daytime running lamp relay and S120, repair as necessary.
  2. Replace the daytime running lamp relay if no open was found in CKT 12 (TAN) between the daytime running lamp relay and S120.

Is the repair complete?
--
Go to Headlight System Check
--

Jul 24, 2015 | Chevrolet Cars & Trucks

2 Answers

Daytime running light module location 2001 impala


The daytime running lamps in your 2001 Chevrolet Impala are controlled by the Body Control Module (BCM) Here is a description of how the system works:

The ambient light sensor is a light-sensitive transistor that varies its voltage signal to the Body Control Module (BCM) in response to changes in the outside (ambient) light level. When the BCM receives this signal, the BCM turns ON either the DRL or the headlamp relay for auto headlamp operation. Any function or condition that turns ON the headlamps will cancel the DRL operation.
Thirty seconds after you start the ignition with the headlamp switch set in the OFF position, the DRL will perform one of two actions:

Illuminate the high beam headlights at a reduced intensity in daylight conditions
Illuminate the low beam headlights in low light conditions
The DRL/EXT lamps fuse in the top of the engine fuse block supplies battery positive voltage to both the DRL switch contacts and to the DRL relay coil. When the BCM energizes the DRL relay coil, current flows through the right high beam lamp, to the left hand high beam lamp, to the energized DRL relay switch contacts, to ground G101.
The high beam headlamps are now in series, and split the voltage so that the headlamps illuminate at halt intensity. The DRL operates when the ignition switch is in the RUN position, and the parking brake is not set or the transmission is not in park. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate.

Oct 10, 2011 | 2001 Chevrolet Impala

1 Answer

Need to know what fuse goes where


I am not sure if this right and there should be diagram on the back of cover.


1 5A Power Mirror Switch

2 10A Daytime Running Lights (DRL),
Back-up Lamps, Transmission,
Passenger Air Bag Deactivation
Switch, Blower Motor Relay

3 7.5A Right Stop/Turn Trailer Tow
Connector

4 — Not Used

5 15A 4x4 Control Module

6 — Not Used

7 7.5A Left Stop/Turn Trailer Tow
Connector

8 — Not Used

9 7.5A Brake Pedal Position Switch

10 7.5A Speed Control Servo/Amplifier
Assembly, Generic Electronic
Module (GEM), Shift Lock
Actuator, Turn Signals

11 7.5A Instrument Cluster, 4x4, Main
Light Switch, Truck Central
Security Module (TCSM)

12 — Not Used

13 20A Brake Pedal Position Switch

14 10A or Not Used 10A: If equipped with Anti-Lock
Brake System (ABS) Control
Module

15 — Not Used

16 30A Windshield Wiper Motor, Wiper
Hi-Lo Relay, Wiper Run/Park
Relay

17 20A Cigar Lighter, Data Link
Connector (DLC)

18 — Not Used

19 25A PCM Power Diode, Ignition, PATS

20 7.5A Generic Electronic Module
(GEM), Radio

21 15A Flasher (Hazard)

22 20A Auxiliary Power Socket

23 — Not Used

24 7.5A Clutch Pedal Position (CPP)
switch, Starter Interrupt Relay

25 — Not Used

26 10A Battery Saver Relay, Auxillary
Relay Box, Restraint Central
Module (RCM), Generic Electroic
Module (GEM), Instrument
Cluster

27 — Not Used

28 7.5A Generic Electronic Module
(GEM), Radio

29 20A Radio

30 — Not Used

31 — Not Used

32 — Not Used

33 15A Headlamps, Daytime Running
Lamps (DRL) Module, Instrument
Cluster

34 — Not Used

35 15A or Not Used 15A: Horn Relay if Not Equipped
with Truck Central Security
Module

36 — Not Used

Jun 02, 2009 | 2001 Ford Ranger Regular Cab

1 Answer

Headlights do not turn on at the light switch.


manual headlamps

Visual Inspection Chart
Mechanical Electrical
  • Headlamp switch
  • Multifunction switch
  • Central junction box (CJB) fuse:
    • 7 (30A)
    • 30 (15A)
    • 46 (10A)
    • 47 (10A)
  • Circuitry
  • Headlamp bulbs
  • Daytime running lamp (DRL) relay No.1


Autolamps

Visual Inspection Chart Mechanical Electrical
  • Headlamp switch
  • Central junction box (CJB) fuses:
    • 19 (5A)
    • 56 (30A)
  • Circuitry
  • Headlamp bulb
  • Daytime running lamps (DRL) full relay No.1 (if equipped)
  • Vehicle security module
  • Photocell


If autolamp system, Vehicle security module has a headlamp rela inside of it. under left side of dash.

May 26, 2009 | 2002 Ford F250 Super Duty SuperCab

2 Answers

01 Cavalier no lights


The ding noise is getting your attention the daytime running light flashing is saying no daytime running light are working.
Check engine means no headlights.
Check fuses
check to see if the headlights are plugged in.

Apr 14, 2009 | 2001 Chevrolet Cavalier

1 Answer

1994 ford f-150 with day time running lights headlightnot working


Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action
  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Feb 25, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

Headlights alternate on and off left and right daytime/high beam


although the underhood relay panel is common, I'd check your headlamp bulbs first, these are cheaper than the fuse box. The daytime running lights work off the high beam circuit, thus, a blown highbeam bulb could be the culprit, the fusebox solution was more common on 2001 and up modles, although it's a definite possibility.

Feb 18, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
2001 Ford Ranger Regular Cab Logo

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

69199 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Ron Lankford

Level 3 Expert

5383 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...