Question about 2000 Audi A4

1 Answer

Audi a3 Battery has been disconnected and now radio will not work. All the radio displays is SAFE - have read the manual and followed instructions but nothing is happening.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

You have to hit certain buttons before you can enter the code, and then hit those same buttons to tell the head unit that you're done entering the code. Sometimes it takes several tries before they'll work.

The other possibility is, if you enter it twice incorrectly, you have to let the car sit with the key on (but engine off) for two hours before trying again - it requires that time in between. Less than two hours and it'll ignore any attempt to unlock it.

Posted on Aug 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Got new battery now radio don't works. Wont go on just say 1. Safe


Who replaced the battery ? Didn't have external battery supply hooked up ? Read this Battery Disconnect or Replacement Problems You will need to take it to the dealer !

Dec 07, 2015 | Audi Cars & Trucks

1 Answer

Had battery disconnected on my audi a3 2004 and the radio went into 'safe' mode. Now I have to type in my four digit code every time i start the car. Very annoying typing this code several times a day.. is...


Read the instructions for code entry and you will see how to save the code after entering it. You should have a user manual for the wireless that will explain how to enter code and save it.

Aug 17, 2013 | Audi A3 Cars & Trucks

1 Answer

My Audi a3 20l tdi radio it says 2 safe, I disconnected the battery, now the radio want the code, I don't know the code, and when I press the scan and rds it doesn't respond, after pressing scan...


take it to the 4s garage, if you want to find out the problem by yourself,you first have some professional tool , there are some diagnostic that always can figure out the problem i can show you: www.xcardiag.com/

Apr 12, 2012 | 2004 Audi A3 Sportback

1 Answer

My AUDI A3 2000 model stays on safe I tried the scan and RDS buttons but nothing. Please help. Lesley-ann


if radio in safe mode look in owners manual in dash if it dont have instruction how to to unlock radio out of safe mode, the audi or volkswagon dealership has to unlock radio.

Feb 20, 2012 | 2004 Audi A3 Sportback

1 Answer

Cod do radio audi a3 2001? serial no. 18998


IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2001 Audi A3 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Apr 14, 2011 | 2007 Audi A3

1 Answer

My radio is in 2 SAFE mode on my 2004 Audi TT. My mechanic had to disconnect the battery to replace some parts on my car. when he turned the car on the radio was in 1 Safe mode. The code in the manual he...


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Nov 20, 2010 | 2004 Audi TT

1 Answer

I have a 2001 Audi A4. When I bought the car from the dealer used, my radio was in safe mode. The battery died while they were detailing the car. The radio is on and the words "SAFE" are on the screen. I...


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi radio from the car manufacturer! The sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Oct 15, 2010 | 2001 Audi A4

2 Answers

2001 Audi TT Quattro Roadster Had to dis-connect the battery. Followed instructions to put back in the radio code. Everything worked... except now the word "phone" is showing and nothing is happening.


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jul 08, 2010 | 2001 Audi TT

2 Answers

Instructions to unlock stereo


THIS WAS POSTED ON THE AUDI TT CLUB WEB SITE.

Turn on the radio. The word "SAFE" appears on the display.

* Press the FM2 and RDS buttons simultaneously and hold them down until "1000" lights up in the display. Release buttons. Do not, under any circumstances, continue holding them down or press them once again. This would cause the radio to consider the number "1000" to be the input code number.

Use stations buttons 1 - 4 to enter the code number on your Radio Card.( THE RADIO CODE SHOULD BE WITH THE OWNERS MANUAL-??) Use button 1 to enter the first digit of the code number, button 2 to enter the second digit, and so on. Station buttons 5 and 6 cannot be used.

* Once the code is shown in the display, press the FM2 and RDS buttons again simultaneously and hold them down until the word "SAFE" appears on the display. Soon afterwards, a frequency will be displayed.

(If you do not have the "Radio Code", the Audi dealer, or someone, will have to pull the radio out to get the serial number off of the back.)

The radio can now be used again.

Aug 14, 2008 | 2004 Audi TT

1 Answer

Audi radio code


I accidentally tossed out my 1993 Audi 100CS radio code
when getting rid of junk in the glovebox.
After changing my headgasket on the motor we reconnected the battery supply & found the radio on SAFE mode.

AUZ1Z7N2020175 is the Radio #

Anyones help to me at Dhuber@c-ram.net is appreciated.

Thank you in advance!

Jun 11, 2008 | 2007 Audi A3

Not finding what you are looking for?
2000 Audi A4 Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13218 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...