Question about 1998 Chevrolet C1500

1 Answer

Signals turn signals not working lights ,brake, emergeny flasher all ok

Posted by on

  • 2 more comments 
  • mhpingman Jul 14, 2008

    I have a 1981 C-10 that I put a 1998 Z-71 step side bed on. Cannot get the lights to work when i turn the headlights on.

  • Anonymous Aug 19, 2008

    2001 chevy montecarlo stop lights go out at night and signal lights stop working often

  • Anonymous Sep 03, 2008

    THE DRIVER SIDE BREAK AND TURN SIGNAL IN THE REAR DOSEN'T WORK IV PUT SEVERAL NEW BULB IN AND NO RESULTS

  • Anonymous Mar 19, 2014

    emergeny flashers dont work

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

You may have installed a bed that has a different wiring configuration than the older style. The electrical systems are very different from '81 to '98. You probably have a 3 or 4 wire system on the bed and the truck itself has a 2 wire system. Bad grounds are the biggest cause of electrical problems. Good luck

chris

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My left brake light/turn signal isn't working! I replaced the bulbs and turn signal flasher! Still not working! Its 2000 Chevy s10 blazer


If the other brake and turn lights are working the brake light and flasher units are ok . With a test light check at the bulb holder terminal and bulb holder body, test light should glow ,if not check from terminal to a metal part of panel away from the light body . If test light now glows the brake light body has a bad earth if the test still not glowing the power cable to the light is broken.

May 20, 2014 | Cars & Trucks

1 Answer

I have a 2000 dodge 3500 and the brake lights and flashers don't work but turn signals do work


work on one thing at a time, brake lights first, check the brake switch, is it mounted ok ? is power geting to it ? replace if any doubt. check all fuses, replace 4-way flasher, cheap fix . a repair manual has good info, including wire diagrams, for all circuits, etc.,,.. check wir harness @ rear of truck, & along frame for damage, corrosion, etc.,.

Jan 29, 2013 | Dodge Ram 3500 Cars & Trucks

1 Answer

I have a 98 eclipse. I was putting new tail lights on and then the signals stopped working along with the brake lights. the fuse to the brake lights had burnt so I replaced it. The signals however are...


IF THE TURN SIGNALS STILL WORK IN THE FRONT, THAT MEANS THE FUSE & THE FLASHER ARE OK. IF THE SIGNALS DON'T WORK AT ALL CHECK TURN SIGNAL FUSE & STOP / BRAKE FUSE. ARE YOU SURE THE CORRECT BULBS ARE BEING USED?

Jan 24, 2011 | 1998 Mitsubishi Eclipse

1 Answer

My "brake" light turned on but my emergeny brake is not on and my cruise control stopped working at the same time. What does this mean?


Check your brake fluid level. Check brake lights. If the cruise sees any sign that you are trying to slow down. ie... any brake input. It will not allow you to set cruise.

May 20, 2010 | 1994 Toyota Camry

1 Answer

Turn signal, dont work, emergeny flahers work


first you need to check the ground connection of the tail lamp, poor ground connection might be the cause. about the turn signal, clean the turn switch using contact cleaner spray. If this cannot solve the problem. The switch have to dissmantle and service manually.

Sep 02, 2009 | 1993 Mercury Grand Marquis

1 Answer

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did...


I think that your flasher is bad I believe that the 4-ways flasher is a seperate flasher unit it should be in the fuse box and look like the 4-way flasher , to find the flasher turn on the 4-ways and you can feel it or hear it flashing and lok for the flasher for the turn signals
Mike

Jun 26, 2009 | 1990 Buick LeSabre

2 Answers

Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

Jun 18, 2009 | 1985 Ford F150

1 Answer

Rear brake light function not working


Hi
You may just have a bad earth in wiring on the lighting or your light control modual could be fuilty has any one tested this for you
Paul

Dec 31, 2008 | 1996 Lincoln Town Car

1 Answer

Signals


check fueses.turn all the lights if one of the light is out replaceit

Aug 22, 2008 | 2001 Kia Sephia

Not finding what you are looking for?
1998 Chevrolet C1500 Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...