Question about 1999 Oldsmobile Cutlass

1 Answer

I AM HAVING WINDOW PROBLEMS ON A 1999 OLDS CUTLASS, DRIVERS WINDOW, AND THE ELECTRICS SEEM TO BE OK, WHEN I DROP IT, IT GOES CROOKED, AND IS HARD TO STRAIGHTEN AND GET TO CLOSE, IS THERE 2 CONNECTIONS FOR THE WINDOW TO THE TRACK INSIDE THE DOOR

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 56 Answers

The window is not staying in the track . at the bottom of the glass there may be some guides that keep it in the track that may be broken. You can call the dealer and ask the parts person to look and see in his/her computer if there are window guides that keep the window in the track that you can purchase and replace them. they can show you the diagram so you can see where they go in place. you may have to glue them on to keep them in place better. alot of times this is the problem. other times, the track is worn and bent, and will need to be replaced to correct the problem.

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i fix driver side power window on 94 olds cutlass ciera


Time for a new electric motor. The driver side wears out first because it is used most.

Dec 10, 2014 | 1994 Oldsmobile Cutlass Ciera

1 Answer

I have an 1986 olds cutlass supreme. I need to install the rear window molding trim that goes just over the trunk lid (side trim and roof trim are already installed with clips). Do i need special clips to...


yes you need the correct clips and it's real hard to install the bottom rail if the top and side rails are already on since the sides go over the bottom and the top goes over the sides to keep it from leaking.

May 13, 2014 | 1986 Oldsmobile Cutlass Supreme

1 Answer

1992 Olds Silhouette drivers side window will go up slowly. I will go down fine, just up it will go a little then stop. I wait a while and it will go up a little and stop. It could take fifteen minuets to...


could be a weak motor, But first I would add just a little lube to the window rails to see if that helps, the rubber around windows gets hard and brittle with time, when the window goes down the weight of the glass helps it drop , but on the way up its having to lift the whole thing,

May 31, 2011 | 2000 Oldsmobile Silhouette

1 Answer

I am having a hard time removing the Fuel Rail for my 1999 Olds Cutlas. Why is it so difficult to remove?


The fuel injector stems have an o-ring seal that fits tightly into the injector bores in the intake manifold. It is normal to have to pry up on the rail at each injector location until each o-ring seal breaks loose, BE GENTLE though.

Jan 30, 2011 | 1999 Oldsmobile Cutlass

1 Answer

Ok my 91 olds cutlass ciera drivers window dont work but the others do and i bought 2 used switchs and they both dont work either could it be the wirring


it sounds like it may be two things....wiring is bad running to the motor in the door,, or it is the motor its self is bad... try the wires first and if they do not work..then you need a new window motor

Jul 21, 2010 | 1991 Oldsmobile Cutlass Ciera

1 Answer

Best way to repair a starter solenoid on a 1992 Olds Cutlass Supreme


take a propane torch heat the aluminum where the screws go into starter screws will come out

Oct 20, 2008 | 1992 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1999 Oldsmobile Cutlass Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...