Question about BMW 525

1 Answer

1990 525i bmw headlights

My low beams only work intermittently. high beams work fine and so do the fog lights. help.

Posted by on

  • 2 more comments 
  • Edward Welch
    Edward Welch Oct 13, 2008

    Some one called SAM VANZO fell in live with my car and cummed on the lights so it wouldnt work pls help me

  • Anonymous Mar 15, 2014

    replace left high beam semi sealed head light on Bmw 525i 1996

  • Anonymous Mar 15, 2014

    high beam lights&fog lights dont work.2002 galant

  • Anonymous Mar 19, 2014

    My IDRIVE screen comes on and off. Most of the time it says BMW and every now and then it works fine. The IDRIVE button will not work until the normal screen is on.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Check the wiring in the lights it may be poor construction or mis care that has madr a wire become looseand only rarely turn on

Posted on Jul 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

High bam and fog lights that just stopped working


Disconnect one of your headlamps and use a multimeter to figure out the positive low beam and ground on the wiring, then using the ohm meter function check the high beam wiring back to the fuses and relays.
If I remember correctly, the fog lights are supposed to turn off when you turn on the high beams. So that switch system may need to be looked into on the controls.

Aug 16, 2016 | 2003 Ford Explorer Sport XLT

1 Answer

2008 Ford F250 low beams are not working but High


check ground going to the frame of the car also check bright light switch also check your head light relay

Oct 05, 2014 | Cars & Trucks

1 Answer

High Beams and Fog Lights on 2004 Pontiac Grand Am do not work


You can not have High Beams on and FOG LIGHTS at the same time. The Body Control Module controls this. You may have a bad Body control Module

Feb 12, 2014 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

GMC Envoy 2003 SLT only the parking lights and fog lights work. The low beam and high beam don't work. Please help


Well, the problem is that I dont know the reason, you should investigate. There could be issues with lamps (must get new) or electricity problems (must head to auto-service)

Jun 29, 2012 | 2003 GMC Envoy

1 Answer

I want to use fog lights with high beams


hi,
you could just run a possitive wire from the back of your high beams straight to your fog lights then earth the fog lights stright to the car. this will work just make shure you disconnect your battery before playing with the wire's. if your not sure what you are doing i would recommend you take it to an authurised electrican. as for the high and low, same system but i would say it probably would over load the fuse creating more work for you.

Jan 05, 2009 | 1998 Honda Passport

2 Answers

High beams wont turn on.


First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill

Nov 19, 2008 | 2004 Ford Explorer Sport Trac

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

251 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...