Somehow, the Manual driver's seat has become locked in it's most rear postion. Upon closer inspection, I can't see any cause for it not to be able to slide freely on the track. no debris in its path, nor is the seat broken. The left side disnegages totally, which alllows the seat to inch fwd several inches, but the right side dosen't move at all and thus the seat remains locked in its rear most track. my legs are long, but this is getting uncomfortable! thanks.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not a description that gives me a mental image of what isn't happening. Seat (mechanical) mechanisms are generally reliable and give little bother other than return springs which become weak, detached or break. Often such a fault only becomes obvious when the seat is removed for closer inspection.
Seats with pneumatic, hydraulic or electrical functions have a different set of problems, often rooted in lack of use, damp, dusty and dirty operating environment or advancing age
You don't idicate whether it's a power or manual seat. Assuming it's a manual seat there is a link between the rails under the seat. It can become disconnected preventing the right rail lock from unlocking.
I had a similar problem. I noticed one of my door handles (passenger side) had a little key engraved on it with a small slot under it. I inserted my key into that slot to pry the cover out. Underneath was a hidden keyhole which fit the pathfinder key perfectly and opened the passenger door. I could not find this solution in the manual - so simple - yet stressful.
The driver's side rear fuse block is located under the rear seat on the driver's side of the vehicle. The rear seat cushion must be removed to access the rear fuse block. See "Removing the Rear Seat Cushion" listed previously.
To access the fuse block, push in the two tabs located at each end of the fuse block cover. Then lift the cover off...
The PCV valve is located in the valve cover on the passenger side of the vehicle. The valve is closer to the firewall than it is to the front of the engine. It has a hose attached to it and threads into the valve cover.
Nissan Scope Technician- 10+ years experience is Nissan dealership
The trunk release cable runs along the inside edge of the car, under the carpet, on the driver side. It then snakes up over the metal under the rear seat, and then into the trunk, running along the trunk hinge/arm, driver's side. You will need to remove the rear seat bottonm and the seat back, and pull the carpet back on the driver's side to see the cable... More below:
-------> Before you do all of that, unbolt the latch handle and see if the plastic tab on the latch that holds the cable is broken; the cable release wires rarely fail, I replace handle assemblies regularly, never a cable. Maybe you just need a handle assby. Feel free to comment back if you need more assistance; Thanks for choosing FixYa.