Question about 2005 Ford Taurus

1 Answer

THE ANTI THEFT SYSTEM IN MY 2005 TAURUS WONT DISENGAGE

I've tried both remotes and keys. car will not start. I disconnected the battery. The theft light stays blinking if I turn the key to acc and leave it there the radio works but if i step on the brake pedal everything shuts down.Please help me I cant afford to take it to a dealership

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This is a long shot...I know but for what its worth....
The Taurus has in much the same lay-out as the European Ford (e.g the old Scorpio). You should find two large fuseboxes under the hood near to the windscreen (one each L/R). When driving in rain humidity enters these fuseboxes. This can give ANY funny combination of effects.My car started blinking with headlights, horn waking the entire block and a lot of other fenomenas allthough shut off and key out. Try taking out all fuses (map them on a sheet of paper) and enter some compressed air at short range into each and every fusecontact.
(Just in case ...if you have a towinghook with a connector...do the same with these contacts)

Posted on Aug 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot get the Pats system on a 1999 Ford Taurus to reset to learn a new remote fob. What could be the problem.


Ford Passive Anti-theft System (PATS) - KCSS ...

https://kcss-transportation-technology.wikispaces.com/share/.../61579706
The passive anti-theft system (PATS) uses radio frequency identification .... This hasreset instructions when you get to the point where she turns over but won't ... Took the truck to a Ford dealer and they recommended replacing the ... http://www.f150forum.com/f6/1999-f150-4-6-wont-start-anti-theft-light-flashing-129601/Missing: learn

Reference: - Ford Anti-Theft (PATS) ' FordForumsOnline.com

www.fordforumsonline.com > Ford Tech Forums > Sound & Security

Oct 26, 2010 - 16 posts - ‎3 authors
Ford SecuriLock Overview PATS is a vehicle security feature ... be noted that PATS is not your Remote Keyless Entry (Key Fob). ... The PATS Control Modules flashes the "Theft" lamp to show system ... keys are currently qualified for the 2000/1Taurus/Sable, 2001 Windstar, ..... 1999 Taurus DOHC 145,000.Missing: learn

Reprogramming procedure for Mercury, Ford and Lincoln ...

www.autorepairinstructions.com/?p=171

Jan 14, 2016 | Ford Cars & Trucks

2 Answers

Ford taurus 1997


Try pulling the fuse for the anti theft system and starting. If the car starts normally, then the problem is with the theft system. The theft system will reset itself after a period of time.

Jul 17, 2008 | 1997 Ford Taurus

1 Answer

How to disconnect anti theft


It is hard to give a definite answer because I don't know which and how many wires were damaged...Anti theft can be a real HEADACHE.....You can begin by disconnecting battery cables..Use your VIN number for parts,Get new ignition with a programmed factory key from dealer only.....They probably blew certain fuses and or relays when this happened...Or maybe not..Install new ignition connect battery cables..,turn switch on just to check for bad fuses and relays...Disconnect battery again...replace any fuses blown...Connect battery again...( Each time you disconnect battery it resets the computer system and should clear anti theft codes..)..make sure all doors are unlocked by using door remote key fob....Now see if vehicle will crank..If all is done correctly it should start...However I don't know how much damage was done.....It may possibly be too much work to totally disengage anti theft....You could start with removing all fuses and relays related to anti theft but disconnect battery before...I DO NOT RECOMMEND trying to disable the theft system.....You may create more headaches that you want.......Begin by trying what I described just to be safe...!!....

Jan 27, 2015 | 2001 Ford Windstar

2 Answers

How do I disable the anti-theft system?


have to reset the code... turn the key on and off several times.. 6 or 8 times on and off on and off and door locks will kick on and lock and unlock it will re set your computer.

Jan 24, 2015 | 2005 Ford Taurus SEL

1 Answer

My friend replaced the positive terminal cable on her 2005 nissan altima with a positive terminal cable from the factory and now the car won't start at all. There is power to all the fuses and the battery...


Hello.
It is very likely that the terminal is fine. Many vehicle owners are not aware that the newer factory installed anti-theft systems will lock down the car, ( prevent it from starting ), if the battery is disconnected for more than just a couple of minutes. In the future if you need to disconnect the battery, make sure that you dis-arm the anti-theft system first

You should be able to find out how to dis-arm/over-ride the anti-theft system in your owners manual.

I hope this helps you.
Donnie

Mar 07, 2011 | 2005 Nissan Altima

1 Answer

Car won't start.Theft light blinks,clicking sound under hood and thumping like horn wants to go off.Seems like it's stuck in anti theft mode


anti theft light should blink every few seconds.

try disconnecting the battery for 15 minutes.

Anti-Theft-Perimeter The perimeter anti-theft system consists of the following components:
  • anti-theft indicator (THEFT)
  • remote anti-theft personality (RAP) module
  • hood switch
  • keyless entry remote transmitter
  • deck lid ajar switch
NOTE: The remote entry features will not function when the ignition switch is in the RUN or ACC position.
Up to four keyless entry remote transmitters (15K601) can be programmed at one time.
The keyless entry remote transmitters :
  • Are programmable.
  • Must be set at the same time.
  • House four buttons.
  • House three buttons (Mexico Anti-Theft System only).
Programming
Refer to Section 501-14B.
Inputs and Outputs
The remote anti-theft personality (RAP) module receives input from the following components for anti-theft operation:
  • Hood switch.
  • Deck lid ajar switch.
  • Keyless entry remote transmitter.
  • Power door lock switches (LH and RH).
  • Door courtesy input.
The RAP module distributes output to the following for the anti-theft system:
  • Power door unlock relay.
  • Power door lock relay.
  • Liftgate unlock relay (Wagon)
  • Park lamps relay.
  • HORN relay.
  • Dome lamp.
  • THEFT indicator.
  • Deck lid release.
Arming
The anti-theft system can be armed if:
  • The ignition switch is in the OFF position.
  • The panic alarm is off.
  • All doors are closed.
NOTE: If a door is open, the anti-theft system is prearmed and waiting for all the doors to be closed. The THEFT indicator will remain illuminated for up to 30 minutes waiting for all the doors to be closed. If a door remains open after 30 minutes, the THEFT indicator will turn off and the system will return to a disarmed state. After all doors are closed and the 30 second prearm (continuous THEFT indicator illumination) is complete, the system is armed.
NOTE: If the theft LED does not flash after 30 seconds, check the LED FLASH PID to see if the feature is enabled.
The anti-theft system will be armed when the lock button on the keyless entry remote transmitter is pressed, all doors are closed and 30 seconds have elapsed.
When the system is armed, the THEFT indicator will flash quickly until the system is triggered or disarmed.
Disarming
NOTE: Using a key in a door lock cylinder to unlock is not a valid method of disarming the anti-theft system.
Untriggered System
NOTE: If the driver arms the system and remains in the vehicle, an untriggered system can be disarmed by turning the ignition switch to the ON position.
An untriggered alarm system can be disarmed by pressing the unlock button on the keyless entry remote transmitter.
Triggered System
NOTE: If the hood or trunk are open when the system is armed, it must be closed and opened again before it can trigger an alarm.
An armed anti-theft system can be triggered by the following conditions:
The deck lid door, liftgate, hood or any door is opened using a key, inside door handle, hood release, etc.
  • The keyless entry remote transmitter can activate a panic alarm which is similar to the anti-theft alarm, but does not cause the THEFT indicator to flash.
A triggered alarm system can be disarmed by:
  • Pressing the unlock or panic button on the keyless entry remote transmitter.
  • Turning the ignition switch to the ON position.
Alarm State When Battery Power Is Cycled
When the RAP module is supplied power the first time at the vehicle assembly plant, the system will be in the disarmed state. The RAP module will remember whether it is armed, disarmed or triggered in its non-volatile memory. When the battery positive cable is removed and then reconnected, the system will return to the state it was in just before the battery was disconnected. If the system is in any prearm state, then the system will return to a disarmed state when the battery is disconnected and then reconnected.

Nov 06, 2010 | 1999 Mercury Tracer

1 Answer

VEHICLE WONT START


Section 13-11: Anti-Theft System, Active 1998 Windstar Workshop Manual DESCRIPTION AND OPERATION Anti-Theft Alarm System NOTE: The system immediately monitors the ignition key lock cylinder upon removal of the key from the ignition. It is not necessary to arm the system for ignition key lock monitoring.

The anti-theft alarm system:
  • protects the vehicle from unauthorized entry into the passenger compartment, engine compartment and cargo area.
  • monitors the status of the ignition key lock cylinder.
  • is controlled by a remote anti-theft personality (RAP) module. The remote anti-theft personality module also controls the electronic door lock functions. Refer to Section 01-14B for more details.
  • when armed, detects unauthorized entry into the passenger compartment by using an input from the GEM module regarding the state of the door or liftgate (open or closed).
  • protects the engine compartment with a hood switch which is located on the LH cowl vent panel and is part of windshield wiper motor wiring (17A477) .
  • triggers an alarm if the ignition lock cylinder is forcibly removed from the steering column.
Once triggered, the system responds by:
  • flashing the low beam headlamps, the parklamps, rear lamps and the alarm indicator warning light emitting diode (LED).
  • sounding the horn (13832).
  • disabling the starter circuit until the system is disarmed.
---------------------------------------------------------------------------------------------
Remote Anti-Theft Personality Module
  • The remote anti-theft personality module is located behind the instrument panel (04320).
  • It contains a radio receiver that receives the RF signal from the keyless entry remote transmitter (15K601) through the alarm and lock system antenna (15603) and sends the appropriate command to the power door locks, the horn relay, or the generic electronic module.
  • The remote anti-theft personality module is equipped with an internal backup power supply which holds the programmed code in memory in the event the vehicle battery is disconnected.
-------------------------------------------------------------------------------
Remote Anti-Theft Personality Module Removal
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Remove radio. Refer to Section 15-01 .
  1. Remove lower instrument panel center finish panel. Refer to Section 01-12 .
  1. Lower glove box.
  1. Remove two remote anti-theft personality module bracket retaining screws.
  1. Disconnect electrical connectors and alarm and lock system antenna (15603).
  1. Remove remote anti-theft personality module and bracket.
  1. Remove remote anti-theft personality module from mounting bracket.
Installation
  1. To install, follow removal procedure in reverse order.
  1. Tighten remote anti-theft personality module bracket retaining screws to 6-8 Nm (54-70 lb-in).

    34bdf35.gif
Components The system is composed of the following components:
  • remote anti-theft personality (RAP) module with integral antenna
  • alarm indicator LED
  • door lock cylinder switch RH, door lock cylinder switch LH
  • liftgate door lock cylinder switch (220A40)
  • hood switch (part of windshield wiper motor wiring (17A477))
  • ignition lock anti-theft switch (19A438)
The following vehicle components are also used by the anti-theft alarm system:
  • generic electronic module
  • power door lock switch (14028)
  • door open warning lamp switch (14018)
  • autolamp relay (14N089)
  • horn relay and bracket (13853) and horn (13832)
  • low beam headlamps
  • rear lamps (13404) and parking lamps (13200)
  • starter relay
  • door lock relays
  • keyless entry remote transmitter (15K601)
--------------------------------
Disarming an Untriggered System NOTE: A perimeter alarm will "shut off" after 165 seconds, but the system is still triggered and is not disarmed.

An armed but untriggered perimeter anti-theft system can be disarmed by one of the following four events:
  1. Unlock the doors by pressing the keyless entry remote transmitter (15K601) UNLOCK button once.
  2. Unlock any door with a key.
  3. Turn ignition switch to RUN or ACC.
  4. The remote entry PANIC button will disarm the anti-theft system only when the perimeter alarm is triggered and sounding.
------------------------------------------------
System Triggering NOTE: Although the remote entry PANIC alarm is not associated with the monitoring of the vehicle, the user will frequently say that the theft system was triggered when actually the keyless entry remote transmitter PANIC button was inadvertently pressed. A panic alarm will not flash the THEFT indicator.

The alarm can be triggered by the following events if the system has been armed and has not been disarmed first:
  • Open any door or liftgate.
  • Open the hood (16612) (if the hood was open when the system was armed, it must be closed before it can trigger the alarm).
  • Dislodge the ignition key lock cylinder.
  • The anti-theft system may be triggered inadvertently when the module is disconnected and then reconnected. To avoid inadvertent alarm triggering, disconnect the smaller 22-way connector first.
When the system is triggered the perimeter alarm will operate as follows: The remote anti-theft personality module will pulse the following outputs at approximately 1.3 Hz, 50 percent duty cycle for two minutes 45 seconds for North America. NOTE: Other perimeter alarms can be programmed for the system.

  • low beam headlamps
  • parking lamps
  • horn
  • THEFT indicator
The perimeter alarm can be retriggered, after a perimeter alarm has sounded for 165 seconds. After a perimeter alarm has timed out, if any trigger input is first seen as normal and is then seen in its trigger state, the perimeter alarm will be retriggered. The perimeter alarm can be triggered a total of three times between an arming sequence and a disarm event. An active panic alarm will be deactivated when a perimeter alarm is triggered (a perimeter alarm overrides a panic alarm).

Mar 02, 2009 | 1998 Ford Windstar

1 Answer

The anti theft system wont disengage in my 2005 taurus


Mike. Please be sure the battery is good. and full charged.
OR if you have an other one, change.

Jul 10, 2008 | 2005 Ford Taurus

2 Answers

2005 ford taurus. Remote entry wont work theft light keeps blinking when key is engaged


HI, I'm reading your problem,
Let me explain something about your car.

2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.

If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.

OK.. I hope this information work for you.

Thank's for submit yous question on fixya.com

Jul 10, 2008 | 2005 Ford Taurus

Not finding what you are looking for?
2005 Ford Taurus Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...