Question about 1993 Ford Ranger SuperCab

1 Answer

I am looking for information on how to wire my 1993 Ford Ranger pickup for a trailer.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

In your wiring harness you have a brown wire, that is your tail and marker lights. The green wire is your right turn. And the yellow wire is your left turn. Don’t forget to add a ground wire. If you are installing a brake controller, run a blue 10 gauge wire to the trailer plug.

Posted on Jul 10, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1993 ranger supercab charging guage remains high all the time. When not started for a few days the battery will die.

Seems that you have a power drain. If you installed any electronics check to see if the wire has an open section that is bleeding the system.
Check to make sure that when the glove box closes the light in side goes off. A sprung glove door will keep the light on and will drain a battery in about 3 days.
If you put a trailer hitch on the truck make sure that the grounding is done correctly. Lighting harness to trailer, trailer to truck. A poor ground will cause the electrical leak and drain the battery if the trailer in attached for a few day, less than 3.

Dec 09, 2014 | 1993 Ford Ranger SuperCab

1 Answer

1993 ford ranger. when you turn on left turn signal front light burns steady and back light does't burn. tested for power and had power. bulb is good. right side works fine.

Although you say you tested it for power, and the bulb is good, I am almost certain it you change the bulb it will work. The one at the back. Take the one from the right side and try it in the left. Then you'll know. If there is still nothing and your test light shows power, it has to be a bad ground wire. If you have an aftermarket trailer plug on that thing, that will be another place to look.

Aug 18, 2013 | 1994 Ford Ranger Supercab

1 Answer

When I hook up a trailer to my 2005 Ford Ranger I get all the clearance lights blinking when I signal,It looks like the power is feeding back through a ground circuit. is there a converter box that that...

Sounds like the trailer is wired wrong what type of trailer (home made) Or yes yo may need a convertor if your signal lights on the truck are independent from brake lights you probably have orange signal lights on the back of the ranger?

Feb 15, 2011 | Ford Ranger Cars & Trucks

1 Answer

The same with me.

Look at the grounds somewhere there is a ground that is out of place. More than likely it on the harness, not in your truck.

Jul 10, 2009 | 1993 Ford Ranger SuperCab

1 Answer

Trailer lights stop working when tow vehicle lights are turned on

Pull all of the bulbs and try it using a tester to each light. I have seen a bulb that would contact both posts and kill the lights. Hope this helps. Mike

Apr 02, 2009 | 1993 Ford Ranger SuperCab

1 Answer

Installing a 7-pin trailer towing recptical on a 1991 Ford F150.

I believe you can look up the manufacturer of the trailer plug kit and find the wiring diagram there. On alot of the trailer plug kits, they have pics and diagrams in the package. The 7 pin plug (truck side) is available with the pig tail set up that plugs directly into the wiring harness for the lights. Then all you would have to worry about is the 2 wires for the electric brakes.

Nov 29, 2008 | 1991 Ford F150

2 Answers

1993 ford ranger will not start new fuel filter & distrubutor

most likely its your pickup inside the distributor.

Nov 18, 2008 | 1993 Ford Ranger SuperCab

2 Answers

1993 ford ranger supercab

the fuse box is inside the pickup under the drivers side dash, there is a flasher which is the round one in the fuse box, it controls turn signals and emergency flashers also in the same fuse box, there is a 15 amp fuse which controls just the turn signals it sits vertical instead of horizontal.

Jun 10, 2008 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

74544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers


Level 3 Expert

5433 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides