Question about 2000 Jaguar S-Type

2 Answers

Failsafe mode i went to my mechanic and the scan gave a code of 1576 on " alldata ". Could someone tell me what it could mean. thanks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Per Jaguar's codes:

P1576 Pedal Position Not Available

I'm assuming your car is a drive-by-wire setup (instead of having a throttle cable, it'd have a potentiometer at the pedal, and the more the pedal is pressed, the greater the voltage output at the pedal, which is translated to a throttle opening percentage underhood by the computer). It sounds as if you have a problem with the pedal, or with the computer's ability to read the throttle angle you're pushing for. Does the car currently drive OK? Or are you having driveability issues? Post up a little more info and we can take it from there.

Posted on Jul 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What's mean p1576 " pedal position not available"?

How to fix it?

Posted on Aug 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C0FBE CODE MEANS WHAT


Seen where?, point and tell.

on the VFD .cluster display?
get it scanned, scan the PCM for more errors.
C codes are chassis codes, in my FSM book.
but my car dont have your code. listed.
its only used in your car.
so get the fsm and look you your code,
or alldata.com might have it.
the FSM for sure.

May 09, 2014 | 2008 Dodge Ram Pickup 2500

1 Answer

Will someone please tell me what code numbers 700 and 178 mean? It's for a 2005 Suzuki Forenza Wagon.


can you tell us what told you that.
1: autozoned
2: your car dash
3: your scan tool?

if a real scan tool it will show, P0700
p0 means federal std. codes....

P0700 Suzuki - Transaxle Control System Malfunction
P0178 i cant find. please post full numbers and letters. all count

this engine is hard to work on
its a Frankenmix car, Suzuki, Daewoo, GM-Holden mix.
my wild guess it has GM engine controls, so getting good info is hard.
but is at alldata.com , log in see diagnostics section for codes.

Dec 28, 2013 | 2005 Suzuki Forenza Wagon

2 Answers

Gearbox failsafe


means overheated, underoiled, ecu issue and plenty more. get a code scanner to identify

Oct 17, 2013 | Audi Cars & Trucks

1 Answer

I have an 04 lincoln ls V8 and i got the warning "ETC engine failsafe mode" all the diagnostics codes relate to the throttle body, i went to my usual mechanic and they told me 900 dollars and i needed a...


yes.first of all I feel your pain but I got to tell you.been in the bis 25 years and everybody thins it just needs to be cleaned or adjusted upon getting bad news...that being said ya...cant spend it if u dond have it so .... where do u even live.... you know fail safe just means engine is running on factory pre-set prerimeters....will your reg.tech tell you anything more I can work with...like are we going fail safe because vaccuum is outside normals or what

Aug 26, 2013 | 2004 Lincoln LS V8

1 Answer

Reading codes


Check the wiring to the throttle body, check the supply voltages as well. Check fuses too, it sounds like it received a voltage spike and then lost voltage and is now forcing limited rpm.

May 14, 2013 | 2005 Ford Expedition

1 Answer

Code po455 reading on scan...mech. checked all hoses from engine to rear of vehicle all fine...i hate to spend $$$ on someone trying to find...gave my car complete tune up and light still on...HELP


PO 455 -- Evap System Gross Leak

That wasn't a mechanic you went to

All hoses or Evap Solenoids are not fine
& a tune -up is no more than spark plugs

That has nothing to do with diagnosing an evap issue

Need a professional scan tool & evap smoke machine
& a knowledgeable person to do the work

Aug 19, 2011 | 2005 Pontiac Sunfire

1 Answer

My engine light on my 2003 Mercury Sable goes on and then for a while it will not be on anymore, but the other night, I seen it blinking and then it went off. When I went to get an oil change the...


Those aren't codes. PH3600 is the part number for a Fram oil filter for your car, P215.60R16 is your tire size. TQ 10 is not a code either, it's a screwdriver size. When you get an oil change they do not scan for codes. Take the car to a shop that has a scan tool to scan your computer. The check engine light means there is something wrong with one of your cars sensors. Scanning the computer will tell you and your mechanic which one.

Mar 06, 2011 | 2003 Mercury Sable

1 Answer

Amber light with the massage indicating Failsafe engine Mode could you please tell me what that means


another one this is a common fault this failsafe mode ,just disconnect the battery and join the leads together to clear the fault

Nov 29, 2010 | 2000 Jaguar S-Type

2 Answers

BMW X5 2004 TRANS FAILSAFE PROG


Hi; If I get the 'Trans Failsafe Prog" message twice within about 2 hours, The SES light will go on automatically. Since I do not seem to have any real transmission problems, this SES message clears itself in about 24 hours. The "Trans Failsafe Prog" messageseems to be used to indicate other transmission problems as well, like loss of transmission fluid, so be careful. I have a 2002 X5. Cheers. Omer

Dec 31, 2009 | 2002 BMW 5 Series

Not finding what you are looking for?
2000 Jaguar S-Type Logo

Related Topics:

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Raygin
Raygin

Level 2 Expert

322 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...