My 2001 CR-V with 56ooo miles on the clock has started to vibrate through the drive line at about 20 mph the vibration goes again at about 25 to 30 mph I have checked the prop shaft and front and rear cv joints any clues as to where to look next.
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: 2001 CR-V drive line judder
If you drive when you apply gas if you have vibration the u joint are loose or jam i change does drive shaft often they dont sell parts to repair in canada its 752.00 plus labour hope it help you fixya our post thanks pierre
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if the wheel alignment is faulty ( castor wobble ) at 70 mph there is no way that you can describe it as a vibration as it virtually rip the steering wheel out of your hands. If it is a torque converter problem then at around 3850-4025 rpm stationary there will be a vibration of the vehicle and engine The sort of vibration that you are experiencing at 70 mph will come from a drive line problem. If rear wheel drive then it could be faulty "U" joints, worn slip joint or failed rear engine mount
If front wheel drive it may be cv joints or bent drive shafts,wheel bearings or brake callipers not moving freely on the mounting bolts.
The vibration at low speeds can be due to possible fault in wheel bearings, drive shaft or even with a faulty steering system.You need to hoist up the car and check on all the individual wheels, hubs and also check for the ABS line to the wheel hubs which could have failed or there is a sensor failure on the wheel hub.