Question about 1993 Mazda 626

1 Answer

My 1993 mazda 626 5 speed; the rpm's are going crazy and you can hear it in the engine; it also feels sluggish; any thoughts

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Mazda Expert
  • 267 Answers

Yes, your clutch has failed and is slipping.

Get it replaced. This requires

  • removal of the transmission
  • removal and resurfacing of the flywheel
  • replacement of the clutch place, pressure plate and release bearing
and 4-5 hours of labour.

Posted on Jan 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1997 Mazda 626 with a 4 cylinder replaced the radiator and when we when to start it all it would do is turn over kind of sluggish it's getting fire fuel in the ground wire is getting hot


Clean ground wire on where it connects to engine block and clean connections on battery. Make sure battery is charged. If battery is low, jump battery with another vehicle and see if it cranks at normal speed and starts.

May 25, 2015 | 1997 Mazda 626

2 Answers

Engine only can rev up to 3000 rpm


check for leaking injector seals.

Dec 16, 2013 | 1993 Mazda 626

1 Answer

Workshop manual for mazda v6 dohc 2L


could be fuel pump or filter,weak spark,dirty air filter.

Dec 04, 2013 | 1993 Mazda 626

1 Answer

There is vibration in my mazda 626/ model 1992


Check the plugs for wear and replace as necessary. When you apply anything electrical, it naturally puts a greater load on the alternator and will require more power from the engine. 700-800 RPMs is about right but double check those plugs. Use NGK or Nippon Denso only. Let me know if you need anything else.

May 21, 2010 | 1993 Mazda 626

1 Answer

I need the serpantine belt routing diagrams for a 1993 Mazda 626 v-6


Question Posted by Asker under the 1994 Mazda for a 1993 Mazda.

Click on the following: free, direct Link. It has several Diagrams including the Serpentine Belt Diagram for your 1993 Mazda 626 2.5L DOHC V6. It has the 2.0L DOHC 4-Cyl Diagrams as well as Instructional and Directional Diagrams that will help you.

http://www.2carpros.com/car_repair_information/year/1993/make/mazda/model/626/1993_mazda_626_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 03, 2010 | 1994 Mazda 626

1 Answer

Transmission problem


This will be a problem with a Engine Speed Sensor, which by having the ECM scanned will indicate the correct ESSCM to install.
Regards,DT

Sep 05, 2009 | 2001 Mazda 626

1 Answer

My 1993 Mazda unextectedly stops running


check wires on the battery make sure tight and try to find out what wires are luse and let me know ill help u out

Jan 02, 2009 | 1993 Mazda 626

1 Answer

RPM going high


it's your idle air control valve sticking.

Dec 23, 2008 | 1997 Mazda 626

4 Answers

Mazda 626 engine cut off when excel over 3000 rmp


my 1988 mazda 626 starts okay then dies everytime it idles down to normal idle speed. i replaced the throttle control sensor and the mass air sensor. i replaced the rotor in the distributor but is still dies. if you throttle up to about 1500 rpm it keeps running. any ideas???

Aug 04, 2008 | 1994 Mazda 626

Not finding what you are looking for?
1993 Mazda 626 Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...