Question about Isuzu Rodeo

1 Answer

Hello. I have Isuzu Rodeo 2004. The OBD2 test shows failure of the P0602 I want to know what the problem says. ? Is there a way to fix the problem without replacing the part? Also I do not feel any car problem P0602 ISUZU - Control Module Programming Error Thanks in advance Yaki

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

That's an ECM fault code. If you feel it's an error, easy way to confirm.
Take it to your local Autozone, Advance, etc autoparts store and have them do a FREE fault scan. They come out to your car, scan the faults, then reset your lights. Get the list from them and if ECM error comes up again then you know it actually has an issue.

Posted on Jan 04, 2011

  • lido101 Jan 04, 2011

    Hi and thanks for your help on this issue. But I did it even earlier. But the engine warning light came on again. I try to know if there is a solution to this problem? Or should replace the part. Or I can fix it?
    Thanks in advance for your help a lot
    Yaki

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

OBS port 95 rodeo


my guess, you are in uSA
with 1995 rodeo. with unstated engine
and wont to use a 1996 scan tool on a 1995 car usa
OBD2 will not work on your 95
the 95 uses custom tools, read $$$$$$$$$$$$$$$$$$$$$$$$$
95 is OBD2
in canada even 97 fails. for obd2 started there in 1998;.

why not say what you are attempting, so we can be on same page.

speaking of pages.
here is the OBD1 flash page

http://www.troublecodes.net/isuzu/

see?

Feb 07, 2017 | Isuzu Rodeo Cars & Trucks

2 Answers

How do i program the pcm in 2004 isuzu rodeo


Most likely you would have a dealer do it

Oct 08, 2016 | 2004 Isuzu Rodeo

1 Answer

Speedometer quick qorking 2004 usuzu rodeo 3.5


did you connect any OBD2 scan tool and look.
the PCM will tell you if the VSS is dead. flat out tell you.
why no scan the PCM and not work blind./??
the tool is cheap to buy, rent or loan. (or any mech will just do it for free as good will. (no dealers here).

ok, Rodeo, 3.5 2004
3.5L is wrong, dead wrong, 3.2 is my guess.
see here, see country and engines, neither i can guess.
http://en.wikipedia.org/wiki/Isuzu_Wizard
which engine ReALLY ?
Not the Rodeo SPORT , answers below are 3.2L non sport.

Speedo dead. what about Odometer.?????
is replace sensor a statement or a question?
replaced with a "d"
my guess it was a question. and guess.
step 1 and 2 all electrical problems.
1: test the fuses, related. Fuse #11?
2: battery fully charged, at 12.6vdc, not 10v, at 10 electronincs dont work right. fix battery. or charge system.

now how does the 04 work.?
the VSS sensor feed data to many things.
PCM (for fueling data)
Speedometer
Odometer
ABS
supension control unit.
cruise control
etc.

if the odometer works its not the VSS.
see?
the cluster is 100% electronic, ....

VSS is input to Speedo and the odometer is electronic inside
same, so if VSS is bad, both die.
fact.
if only the speedo is bad, then it is bad.

scan the PCM and not guess.
the PCM reports a bad VSS, with 100% assurance.

May 25, 2014 | 2004 Isuzu Rodeo

2 Answers

What transfer case control module will fit a 2004 isuzu rodeo?


Try going to www.car-part.com They have a built in Hollander interchange, if there is anything out there that will interchange it will let you know.

Apr 06, 2014 | 2004 Isuzu Rodeo

1 Answer

2004 Isuzu Rodeo, Cruise Control will not switch on. There is not fuse for it.


The system is fully electronic so it can be tested with a scan tool by the dealer. I suggest you have the testing done and then replace the parts yourself.

Oct 29, 2012 | 2004 Isuzu Rodeo

1 Answer

Malfunction indicator "Check Engine" light is on


this light comes when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.

May 12, 2010 | 1999 Isuzu Rodeo

2 Answers

I have a ford f 250 with dtc code p0606, Internal Ctrl Mod Kam Error, what is wrong and how do I correct or fix


There is no P0606? P0602, P0603 or P0605. P0603 KAM interrupt can be a blown fuse or low battery, P0605 can be aftermarket chip / programing or PCM failure (diesels do have a reprogram for false P0605). P0602 is usually a PCM failure.

Oct 24, 2009 | 1999 Ford F250 Regular Cab

1 Answer

Failure to start - 2004 Isuzu Rodeo


sounds like your ignition switch is bad

May 15, 2009 | 1997 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...