Question about Mitsubishi Galant

1 Answer

I have a 2006 Mitsubshi Galant. The key which I used only to start my is in the remotte key bob. The problem is that both of the cases for each key split open and let me stranded. I lost all of the compontents for one remote and the key to the second remote. I have to tape the remote part of the key and put some tape around it. This works for a while, then the key falls out still. I took the car to the dealership here in Baton Rouge and they wanted to charge $280 to replace the keys and program the keys to my car. I have owned many cars and have never had this problem There is definitely a default wiith the way this is setup. I believe that this is a defect and want assistance with this matter. I do not believe that I should pay for 2 keys when defective material is the cause of the problem. Please assist me with getting new keys from the Baton Rouge, LA dealership without having to pay. Anyone can see that this is defected, the same thing happened to both set of keys.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Mitsubishi Master
  • 22,156 Answers

Sorry but its a newer car and keys can only be programmed with dealer software ,about 120 euros a key here so with conversion rate thats cheap ,try paying the price of your american gallon for petrol and only get 1 litre of fuel ,to get your gallon requires 4.5 litres then complain about the price of the keys ,

Posted on Jan 04, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2006 mitsubshi galant bank 1 sensor location

im assuming your talking about the o2 sensor on bank 1 it is usually on a trans axle engine assembly, on the exaust pipe or mannifold closest too you if your looking at the engine compartment you may need to get under the rig to see it but it will be befor the catalitic converter sensor 2 is after the catalitic converter

Jul 23, 2012 | Mitsubishi Cars & Trucks

1 Answer

Where is the SRS control unit on a 95 Mitsubshi Galant S (Location)

once the online game is exceptional and extremely sought after, d3 items an awesome offer of willbuy diablo 3 gold just go out and purchase the online game as opposed to getting the probability of downloading the buy tera gold "dangerous pirated copy" NIR9DQZP or wasting additional bandwidth.

Apr 17, 2012 | 1995 Mitsubishi Galant

1 Answer

Hi I have a 1998 mitsubshi galant and about two weeks ago the gears stuck on 3rd and wont swicth even when I turn off the engine and restart..

You have a bad throttle position sensor which is mounted on the throttle body. Pretty easy to replace, just note the position of the old one. It's secured by two small bolts. The part is usually special order and costs about $110.

Oct 24, 2010 | 1998 Mitsubishi Galant

1 Answer

I have a 1996 mitsubshi galant with a 2.4 motor check engine light comes on the code is 505 the car idles up and down at stop lights etc I did clean throttle body the problem went away after 3 weeks it is...

Bad idle air control valve. Most likely needs to be replaced. I'm guessing you have around 125K miles on your Galant, right? See other posts for solution.

Jun 24, 2010 | 1998 Mitsubishi Galant

2 Answers

What kind of brake fluid does a mitsubshi galant year 2000 need?

Normal DOT3 fluid is the manufacturers recommendation for your vehicle.
If you are flushing the system out, DOT4 is acceptable, but not necessary.

Mitsubishi ONLY requires DOT3.

Oct 19, 2009 | 2000 Mitsubishi Galant

1 Answer

How do you put a timing belt back on a mitsubshi galant ex back in position 1997

the EXACT right way. Buy a haynes repair manual at your parts store. You will be glad you did. It will show pics and important info. Which will greatly improve your chance of success. Remember if your even 1 tooth off it will not run and you will be doing the whole job over. and thats the best case senerio it can be worse!

Oct 18, 2009 | 1997 Mitsubishi Galant

1 Answer

100,000 mile service

Generally oil change and filter. Check/clean/ replace air filter. Plugs and/or leads. The tricky one is the timing belt. If it hasn't been changed to your knowledge then change it.( garage ) Brake pads and discs. Change as required. Coolant levels.

Mar 14, 2009 | 2003 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides