Question about 1997 Saturn SL
Posted by Anonymous on
There is very limited information to determine the nature of your problem. Probable or possible solutions to your problem are as follows; you may have a bad window switch or the hardware pertaining your window is damaged. If you do not hear the window motor gyrating a noise then the motor is bad, the switch is bad or components pertaining to the window guide is bad.
Posted on Jan 04, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 19, 2015 | Dodge Cars & Trucks
Passenger Door Module (PDM)
Body Control Module (BCM)
RR power window switch
Window up and window down relays in each of the rear passenger window switches
Window lockout switch
Reversible power window motors in each of the doors (circuit breaker protected)
LT DOOR CB 25A (System power for left windows)
RT DOOR CB 25A (System power for right windows)
The DDM contains four power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the two front windows have three positions UP, Down and Express Down, while the switches for the rear windows have only two positions, UP and Down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a Class 2 message indicating the switch and it's changed position.
The PDM contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has two positions Up and Down. Each of these switch positions is a direct input to the PDM.
The two rear passenger doors have there own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the BCM, upon receiving a Class 2 message from the DDM, can control the set of relays which will activate the rear window motors.
You need a scan tool to diagnose these systems
Power Window Inoperative - Driver Door
Did you perform the Door Systems Diagnostic System Check?
Go to Step 2
Go to Diagnostic System Check - Door Systems
Operate the driver power window in the UP and DOWN directions.
Does the driver power window operate properly?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3
Mar 24, 2015 | Cars & Trucks
Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.
Sep 12, 2012 | 2011 Hyundai ix35 2.0
Apr 18, 2011 | 1998 Buick Regal
May 21, 2017 | Chevrolet TrailBlazer Cars & Trucks
Sep 03, 2009 | 1997 Volkswagen Golf
Jun 24, 2009 | 1999 Cadillac DeVille
Jun 13, 2009 | 2001 Isuzu Rodeo
May 14, 2009 | 1997 Honda Accord
Jul 06, 2014 | 1997 Saturn SL
60 people viewed this question
Usually answered in minutes!