Question about 1995 Geo Tracker

Open Question

Were is the pcv valve located on a 1995 geo tracker

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 398 Answers

SOURCE: egr valve location

The EGR Valve Location is typically housed on the intake manifold this schematic may help you
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008822d

Posted on Mar 07, 2009

Ad

SOURCE: four wheel drive will not work on 1995 geo tracker

You need to take the cover off your hub and clean and grease the lock ring. It is attached to the spring. It sounds as though your hub is rusted open.

Posted on Mar 09, 2009

  • 2 Answers

SOURCE: reset check engine light on 1995 geo tracker

I had the very same problem with my 94 tracker and it turned out to be something simple. My check engine light had popped on after it had hit 100,000. I went through all of the suggestions that people had suggested (unplug battery......etc) and still to no avail. Searching the internet, I came across a website called suzukiforum.com and there, this guy was able to help me with my problem. It turned out to be a maintenance switch that kicks on every 50,000 miles. This switch is like a secret that the auto manufactures use to ploy owners of their cars to bring to the dealer and then rack up the dollars in unnecessary "repairs". The switch is located under the dash and can be hidden anywhere. From the assistance of the guy on the forum, he was able to send me photos of this damn switch and possible locations where it may be mounted. I found mine in about 5 minutes, where it was attached to the steering column. It's a tiny switch, that you slide up or down, depending on what position it is in upon finding it. If it's up, then slide it in the down position and visa versa. Once you do this, the check engine light will go off. Make sure you do not have the car running and you can even unhook one of the battery posts, just to make sure you don't hit anything while rooting around under the dash. Good luck!

Posted on Apr 30, 2009

Molson02536
  • 3854 Answers

SOURCE: 1995 Geo tracker Stereo Unlock Code

If your lucky the code may have been written down in the manuel book. If it's not written down in the book or it's missing, drive to the chevy dealer that sells Geo trackers and the Service adviser can help you unlock the stereo by getting the information from the Vin number.
Good luck and hope this help. http://www.delcolockcodes.com/

Posted on May 23, 2009

tbirdfan1
  • 3051 Answers

SOURCE: My 1995 Geo Tracker heater blower dont run,need to

Hello there the heater blower is located under the hood on the firewall on the passenger side you will see a round motor looking item there this is your motor and blower now if you have checked the fuses for this than make sure that the wires that this motor is connected to are all in good condition if so than yes replace the blower motor
ok best regards michael

Posted on Dec 04, 2009

Testimonial: "Thank you"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram for 1995 geo tracker transmission modulator valve hose connection


top rear of intake manifold
but 1995 has 2 engine (not stated)
and this fitting is different on both.

May 01, 2014 | 1995 Geo Tracker

1 Answer

Where is the pcv valve located


8v ,just to the left of the throttle body.
16v,
here
http://www.fixkick.com/sensors/16v-engine93w.jpg
click the spinners
find parts
http://www.fixkick.com/find-parts.html

Mar 28, 2013 | 1993 Geo Tracker

1 Answer

1995 geo tracker wont run has spark


It maybe an intake manifold or vacuum hose leak. It can also be valve clearance out of specification.

Oct 29, 2012 | 1995 Geo Tracker

1 Answer

My 1995 Geo Tracker stuck in park


Try replacing your brake light switch that is located at the top of the brake pedal arm. It might work if you wiggle or shake the switch but most likely you will have to replace the switch. good luck leave comment.

Jun 27, 2010 | 1995 Geo Tracker

1 Answer

Changing pvc valve


1995 Geo Truck Tracker 4WD 1.6L TBI SOHC 4cyl
The PCV Valve is located under hood, center, upper engine area, top of engine, mounted in passenger side of intake manifold.

The low gas mileage and the versatility that your 1995 through 1999 Geo Tracker offers are two benefits of owning it. The maintenance needs to be kept up on your Geo Tracker. One form of this maintenance is to replace the valve cover gasket once you have driven 100,000 miles or more.
  1. Allow your engine to cool. Disconnect the negative battery cable. Remove the air inlet hose and air intake case or air cleaner housing. Detach the PCV valve hose from the PCV valve. Separate and remove the spark plug wires and the accelerator cable from their clips.
  2. Loosen and remove the valve cover bolts. Lift the cover up and off. Using a flathead screwdriver, gently nudge the gasket out of the gasket seating area. Using automotive engine cleaner and a clean cloth rag, clean the gasket seating area.
  3. Place the new gasket in the gasket seating area. Put the cover back into place. Put the bolts in and then using a torque wrench tighten them. Do not over tighten the bolts or the gasket will not fit correctly. Reconnect the spark plug wires and the accelerator cable in the holding clips.
  4. Reconnect the rubber hose to the PCV valve. Install the air intake case, or air cleaner housing, and the air inlet hose. Reconnect the negative battery cable. Add oil to the car and start the engine. Allow the car to run 10 to 15 minutes. This will allow the oil to lubricate the engine while it moves to the top.
I hope helps with this (remember rated this help) Good luck.

Dec 29, 2009 | 1995 Geo Tracker

1 Answer

Can not put the point to the timing belt for my geo tracker 1995


how do i set the timing put new belt on its a16 valve have a manuel but doesnt show my engine contact me at d.m@nexicom.net

Nov 18, 2009 | 1995 Geo Tracker

1 Answer

WHERE IS THE LOCATION OF THE PCV VALVE


Depending on your engine, it will set between the carb and valve cover.
It may be greasy and dirty and it is made of metal. Good luck

Oct 16, 2009 | 1993 Geo Tracker

1 Answer

Pvc valve location on 95geo prizm


Both the 1.6 and 1.8L 4cyl. engines have the pcv valve located in the valve cover @ top of engine. It's usually just pushed in a rubber grommet on the valve cover. Twist while pulling, and it should come out. Let me know how you make out.

May 31, 2009 | 1995 Geo Prizm

1 Answer

Egr valve location


The EGR Valve Location is typically housed on the intake manifold this schematic may help you
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008822d

Mar 07, 2009 | 1996 Geo Tracker 2 Door

Not finding what you are looking for?
1995 Geo Tracker Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...