Question about 1981 Ford F 150

Open Question

Need pictures of vacunm hoses and where they go.

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i stop a loud noise like a vacunm leak.


On What, Where from?

No product
No info

Oct 12, 2014 | Cars & Trucks

1 Answer

Transmission shift solenoid


OVERDRIVE SOLENOID IS IN THE TRANSMISSION PAN

Nov 15, 2013 | 1988 GMC C1500

1 Answer

Several weeks ago I had a hose burst in the cooling system -- towards the rear of the engine of my 1997 Safari van. Afterwards I started hearing like the sound of trickling water coming from the heater...


It sounds like you still have a leak somewhere, maybe it's a hose clamp that wasn't tightened or another leak. You should check the coolant level in the radiator, not the overflow bottle. If the system has a leak it won't create a vacunm to draw in the coolant from the overflow, the radiator could be very low. The sound you were hearing was air bubbles in the heater corem maybe the coolant wasn't topped off.. If the core was leaking there would be coolant dripping on the passenger's side floor.

Mar 30, 2011 | 1997 GMC Safari

1 Answer

My service engine light on advance auto parts scanded and came up with code p0440 but gave me no idieas of what promelem may be i disconected battery to clear code but light stayed on can u give me things...


Hello farrah147: My name is Roger and I will help you. You did not say what engine was in your truck or if it was a 4x4 pick up. The code would be for a large leak in the EVAP system This is not the a/c system but the fuel system. The computer Has to be able to draw a vacunm on the fuel system in order to check for leaks. If a vacunm is not obtained then the light will come on. Any thing could cause the problem. A bad gas cap or a gas cap left off will cause a problem. The best way to track the problem is with a scanner. This will priorities the problems and provide a place to start. You could start by following the EVAP line from the motor to the fuel canister. Any breaks need to be fixed.There are switches and solonoids that could also be a problem. But in order to find them you will need a scanner. You mechanic should be able to do this. Most shops should have the equipment. I wish that I could tell you more but with out a computer connected to the truck it is a stab in the dark. If you need further assistance please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Feb 01, 2011 | 2001 GMC Sierra Crew Cab

1 Answer

1989 JEEP CHEROKEE when ingage four wheel drive light dose not come on and front axle pops


check to make sure your vacunm motor on front axle is working, getting vacunm and actually moving.

Feb 02, 2010 | 1989 Jeep Cherokee

2 Answers

P0171 code on 1999 olds cutlass 3.1liter


Check to make sure all vacunm hoses and lines are correctly in place. A Lean code generally means that air is getting in past Mass Air Flow Sensor.Upstream O2 sensors read exhaust b4 Cat converter.

Dec 12, 2009 | 1999 Oldsmobile Alero

1 Answer

Cars stalling when jumping on throttle. Fuel lines and pump are in good working order. Fuel injectors are new. Have to pump gas to start it also...


mcdevito75 here, Could be a faulty Fuel pump regulator, or vacunm lines leaking or dis connected close to the new fuel injectors. Have who ever changed the injectors to re check the work.

Oct 25, 2009 | 1993 Jeep Grand Cherokee

1 Answer

Acceleration/Throttle problems


mcdevito75 here, Have your repair shop run a computer scan on the engine, also check for vacunm leakes at hoses and intake manifold, Have the fuel injectors checked for sticking or not working at all.

Apr 24, 2009 | 1997 Buick Skylark

1 Answer

Rough idle when in drive


possibilties, rotor, cap, carb? fuel inj? vacunm lines loose, adjustment, choke pulloff not operating . properly.

Oct 04, 2008 | Chevrolet Blazer Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...