Question about 2002 Hyundai Santa Fe

1 Answer

I need the wiring colour codes for 2002 santa fe car stereo

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 217 Answers

Hi,



Basically the wiring of the large harness corresponds to the pins like this.

Starting in the upper right hand corner and working down the right side from A12 down to A1.

1=Left rear output-red
2=Left rear output-blue
3=Right rear output-black
4=Right rear output-yellow
5=empty
6=Left front input-black
7=Left front input-yellow
8=Left rear input-orange
9=Left rear input-green
10=Amp 'ON'-blue&orange
11=empty
12=Amp sensor-black&orange

Back up to upper left hand corner on the large plug

13=Right front tweeter output-red
14=Right front tweeter output-blue
15=Left front tweet output-red
16=Left front tweeter output-blue
17=empty
18=Right front input-red
19=Right front input-white
20=Right rear input-blue
21=Right rear input-red
23=Right front sub (+) output-yellow
24=Right front sub (-) output-black

The small harness is the same above with the upper right position being pin 1 going down to pin 4 then back up to the top for pin 5 down to pin 8.

1=Memory Power-Lrg White
2=Amp Ground- Lrg Black
3=Left front sub (+)output-yellow
4=Left front sub (-) output-black
5=Left front mid (+) output-white
6=Left front mid (-) output-brown
7=Right front mid (-)output-brown
8=Right front mid (+) output-white


Hope this will help you.

Thank you

Posted on Jan 04, 2011

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2006 hyundai santa fe stereo wiring color code

I was given two Lanzar 6.5 and two Pioneer 6.5 speakers. There is nothing wrong with my stock speakers, I just wanted to add a little more thump and clarity. I took off the front drivers side interior panel, Which wasn't all that bad, but i'm having major problems putting it back together. I'll get into that a bit later. I figured swapping the old for the new would be simple. Being it has two wires (pos/neg) going to the driver/speaker cone and two wires going to the tweeter portion that goes over the lower part, four wires total. The wires are White, Brown, yellow, and Black going into a black clip, then they turn black coming out the other side. I cut the four after the clip. My new speakers have only two posts to accommodate the driver and tweeter. So I left off the two for the tweeter and it sounded awful. I tried combining the two positive and two negative and hooking it up that way. That too sounded awful. The tweeter was squealing and chirping. I tried every configuration. They all sounded like ***. What am I doing wrong. I know people swap out stocks for after market all the time. I wanted to be sure my new speaker wasn't defective, so I tried all four (Both brands) with the same results. So I gave up and put the original back in. It sounds fine, just like it had before. But now I can't put the door panel back on. I know it's just tricky and i need more patience. I'm so bummed. I have these great speakers and have no idea why I can't install them. Do I need some aftermarket clip? It seems so easy, why is it so flappin hard? I've done this with other cars in the past with no issues. This four wire thing is killing me... Please HELP ME!!!!!!!!

Posted on Jan 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does the wire go when leaving the alternator on a 2002 hyundai santa fe 2.4 engine 2 wheel drive


the heavy wire runs from the alternator to the battery--charging wire
the smaller wires in a plug go to the ECM , charge light or regulator

Jul 25, 2016 | 2002 Hyundai Santa Fe

1 Answer

Which colour is the highbeam wire on a 2003 santa fe.


Get your meter out and find out which wire gets voltage when the high beams are on.
Much easier than trying to find schematics.

Sep 14, 2014 | 2003 Hyundai Santa Fe

1 Answer

2002 Hyundai Santa Fe V-6 pedal position sensor location


ACEELERATOR PEDAL POSITION SENSOR IS USUALLY BUILT INTO ACCELERATOR PEDAL ASSEMBLY .........LOOK FOR WIRES COMING OUT OF ACCELERSTOR PEDAL ASSEMBLY ON THE INSIDE OF CAR NEAR OR UNDER ACC PEDAL ASSEMBLY

Jan 12, 2014 | 2002 Hyundai Santa Fe

1 Answer

What is the pink wire for in the stereo of a 2006 Hyundai Santa fe? and what do I connect the dimmer wirefrom the santa fe to in a new stereo


The pink wire from the stereo unit is often the dimmer wire, and is connected to a power feed from the vehicle's side lights. Not all stereos have a dimmer function however, and may not have this wire available.

Nov 04, 2012 | 2006 Hyundai Santa Fe

1 Answer

On my 2002 Santa Fe, while playing the radio the speakers keep going on and off; but the cd player is fine. How would I gain access to replace the stereo?


to access the stereo you need to remove the dash piece around the control panel. after that you will see 2 or 4 screws holding in the stereo housing remove that and the stereo should slide right out. good luck.

Feb 06, 2011 | 2002 Hyundai Santa Fe

1 Answer

What does 'Error 6' mean on the stereo of a 2002 santa fe?


jammed CD ?? honestly havent a clue have you tried looking in the radio manual ,or ask at the dealers

Mar 04, 2010 | 2002 Hyundai Santa Fe

1 Answer

OBDCs: P1134 P0711 P2300 B1000 Hyundai Santa Fe 2002


P1134 - Oxygen Sensor Circuit Malfunction (No Activity) P2300 - no such code, B1000 - no such code, P0711 - Transaxle Fluid Temperature Sensor Rationality Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Sep 30, 2009 | 2002 Hyundai Santa Fe

1 Answer

Which wire is which in replacing an old stereo in


go to best buy and buy a wiring kit. it has manual to guide you step by step. best of luck

Aug 07, 2009 | 2004 Hyundai Santa Fe

1 Answer

Hyundai Santa Fe problems P0151, P1166, P1167, P0650 Control Circuit MIL Failure


P 0151 oxygen sensor 1, bank 2 - low voltage
Cause- Exhaust leak, wiring short to earth

P0650- Malfunction indicator light

P1166 & P1167 these codes do not exist, if you check these numbers I may be able to assist you further.

Sep 01, 2008 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
2002 Hyundai Santa Fe Logo

793 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...