Question about 1992 Chevrolet Camaro

1 Answer

92 camarohead rest removal

I have a 92 camaro im redoing the uphorstary on andi cant seemto get the head rest off and i needhelp

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 60,639 Answers

There is a hole under the head rest near the post, you must stick a tool in there and pull straight up while depressing the catch down inside the seat back, if you are redoing the seat covers why not just cut the old stuff out of the way so you can see the release?

Posted on Sep 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove head rest on 1991 z28 camaro


if you look closely at where the metal pole goes into the hole you will see a small tab on the collar of the hole. That will release the head rest one detent at a time

Dec 10, 2014 | Chevrolet Camaro Cars & Trucks

1 Answer

Im getting ready to change the transmission on my 92 gmc jimmy (4.3 vortec v-6 automatic). I got a transmission from a junkyard and ineed to know how to set the torque converter and the throttle cable when...


put the torque converter on the gearshaft ans spin it to the right while pushing on it... it should slide back about 2-3 times.. youll know when its all the way on... the throttle doesnt have anything to do with your tranny... i think your refering to the kickdown cable.... leave it set like it is.. when your driving, and hit the gas hard, if it downshifts REAL early or doesnt seemto down shift thats when you need to adjust it to where it feel like it downshift right...
hope this helps

Jan 23, 2011 | GMC Jimmy Cars & Trucks

2 Answers

How do i remove the fuel injectors on a 1994 camaro 3.4 v6 im trying to replace the intake manifold gasket and cant get the injectors out of the fuel rail


You can generally remove all injectors with the fuel rail as a unit. Just unplug them from the wiring harness and pull up the fuel rail. The injectors are just pushed in with o-rings.

Aug 28, 2010 | 1994 Chevrolet Camaro

1 Answer

Where is the radiator fan realay located on a 92 camaro rs 25th anniversary edition?


on the passenger side head u need to get to it from underneath its just below the spark plugs has one wire plugged in to it

Apr 04, 2010 | 1992 Chevrolet Camaro

1 Answer

How do you remove the front headrest from a 92 honda civic LX? I want to put seat covers on but the headrests are mounted on a single post and don't seem to be able to be removed. I tried to pry apart at...


I have a 92 Accord, which has 2 'posts'. To remove it, you must pull the head rest up as high as it will go, then there is a slide built into the plastic piece (round) the post goes through on the top of the seat. Push it in towards the post, while pulling up on the head rest, it should come out. Let me know if this works.

Mar 13, 2010 | 1992 Honda Civic

1 Answer

Car bacxkriring to air filters when start then when gets hot runs


that is usually the indication of leaky valve and stem seal. you can cure it by having your cylinder head rebuilt or replace. first check your compression if you have a low compression on some cylinder squirt oil to cylinder then redo compression test if no change on reading then you need work on your cylinder head.

Sep 18, 2009 | 1986 Chevrolet Camaro

1 Answer

92 camaro fan problem


There is a temp sending unit and a temp sensor.One in the cylinder head between the spark plugs and the other in the intake manifold.If you've replaced both w/no success and insist on tryin the ecm you can swap it only if the other Camaro is the same fuel system (TBI for TBI or multiport for multiport).I've done this quite a few times.The Ecm is under the passenger side dash area where a glove compartment "would be."You'll need a 7mm socket and I think a 10mm socket.To remove the ecm harness plugs you'll have to slide out the little plastic pin locks holding the plugs in.

Sep 04, 2009 | 1992 Chevrolet Camaro

1 Answer

Remove headrests from a 1991 camaro rs


There is a special tool, the release is a spring retainner inside the seat back, you access through the head rest support rod holes.

Nov 13, 2008 | 1992 Chevrolet Camaro

Not finding what you are looking for?
1992 Chevrolet Camaro Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...