Question about Land Rover Range Rover

1 Answer

How do i replace the serpentine belt on a 97 range rover

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

You loosen brackets on tensioners (they look like rollers) and belt slips off when they're loose. NOTE: make a note of how belt is routed before you take it off. If not it's like figuring out Rubics cube

Posted on Jan 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the serpintine belt for range rover v8 4.4 pterol


If I read your post correctly.....
The serpentine belt is also more commonly known as the fan belt.
Located at the front of your engine behind the radiator. As your engine runs, the cooling fan/water pump, alternator, a/c compressor and belt tensioner pulley are all propelled by the same belt which runs a serpentine pattern thru and around them all. If you are getting a fault message or alert of any kind regarding your belt you need to address it immediately. Aside from sudden stranding there are multiple systems that can be damaged from an ineffective or malfunctioning belt. Hope this answers your question correctly, feel free to repost with additional info or inquiry. I will help however I can.

Jan 10, 2014 | 2004 Land Rover Range Rover

1 Answer

Serpentine Belt Routing for range rover 2006 sport


this link should help ya out its for the 4.0 and 4.6 its a diagram / picture of the front of engine with a belt on it so it should be easy to figure out http://www.roverparts.com/Techtips/Serpentine_belt_routing_r4r6_bosch.cfm

Aug 08, 2012 | Cars & Trucks

1 Answer

Diagram for a drive belt for a 2004 range rover vogue


I need a diagram and instructions on how replace a new belt on a 2005 Range Rover V

Mar 15, 2012 | 2004 Land Rover Range Rover

1 Answer

2004 range rover serpentine belt replacement


There are 2 belts on the vehicle. It is EXTREMELY crirical to make sure you make a diagram of exact path of belt through the pulleys before removing it. If you dont, You will find it difficult if not impossible to figure it out after the fact. If you place it back wrong and it manged to fit severe engine damage could occur.
Standard procedure for any vehicle is to release tension on the tensioner pulley first'
This is accomplished by releasing tension on the pulley it is spring loaded and will release by placing the appropriate socket on the
pully and turning to release tension. (This can be difficult secondary to inadequate clearance. Lisle tools makes a tensioner pulley tool that I consider absolutely necessary.) then slip the belt off while maintaining force to keep tension off. release tension on tensioner again for clearance make sure belt is aligned properly on all pulleys befor you close the hood(bonnet).


ulley tool and I consider this tool essential

Dec 31, 2011 | 2004 Land Rover Range Rover

1 Answer

2000 Range Rover 4.6 serpentine belt diagram Belt slipped off, how do I fix it?


The big Belt for the AC,Cooling,Auternator etc. slept off. I stopped the car imediatly. Range Rover P38 1999. The Engine sounds still healthy. Will there be big damage after all?

Dec 13, 2010 | 2000 Land Rover Range Rover

1 Answer

1999 range rover supercharged serpentine belt diagram


should be located under the hood of the car if not u can go to any local auto parts store and ask for a print out

Apr 21, 2010 | 1999 Land Rover Range Rover

1 Answer

How do i change drive belt on p38 range rover


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

Not sure if this what you need for the "P38" but it is for the 1996 Range Rover.

I do not know if you still need this information, but I am going ahead and answering it anyway.


Click on the following Link. It has the several Serpentine Belt Diagrams, one of which matches your specific vehicle with your particular options (AC, Power Steering etc..).

Regarding HOW:
Standard Rule to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Rotate/Move the Tensioner away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys
.
Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped...

http://www.2carpros.com/car_repair_information/year/1996/make/land_rover/model/range_rover/1996_land_rover_range_rover_drive_belt_routing_diagram.htm

Feb 12, 2010 | 1996 Land Rover Range Rover

1 Answer

97 escort wont start with new serpentine belt


check to see if the injectors are working....

Jul 07, 2009 | 1997 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...