Question about 2001 Ford Escape

1 Answer

My 2002 Escape is stuck in reverse - 2001 Ford Escape

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

I am uncertain what escape you drive but if this is the 4 cylinder version, then you will require a new transmission or have your transmission serviced. You asked why? Because Ford did not put a transmission cooler on the 4 cylinder, but only on the 6 cylinder version with the tow package, which prevents your transmission from overheating. Furthermore, you have to change your transmission fluid at greater intervals to prevent harm to your transmission.

Moreover, is this a manual transmission or automatic
?. If this is a automatic, you maybe able to manipulate the shift linkage cable on the transmission and get it out of reverse.

Posted on Jan 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"I have a 2002 Ford Escape no reverse or forward gears! Error code P1714 Shift solenoid (SS) A - malfunction. Is my transmission shot? Fluids levels are good no smell or discolorization."


I say just change the part out..as ,long as its external it should b fine...Im pretty sure it is but I don't know everything bout trannys

Sep 12, 2014 | Cars & Trucks

1 Answer

Auto 4x4 stuck and wont go back to auto


try reversing with it first and it may come out of 4x4

Aug 04, 2014 | 2002 Ford Escape

1 Answer

Why wont my 2002 ford escape move in reverse but no foward gears it is an automatic transmission?


Sounds like you need a transmission rebuild :(
Typical symptom of transmission failure, especially in a vehicle as old as yours. Have you ever replaced the transmission fluid or filter? No? Hmmmm... ;)

Jul 21, 2014 | 2002 Ford Escape

1 Answer

How much for 2002 transmision for 2002 ford escape Tourqe converter stuck on on position


you can still drive but you will burn more fuel .. in a junk yard about 350.00 or trans shop probly 3000.00 to rebuild

Jul 20, 2014 | 2002 Ford Escape

1 Answer

Reverse not working


If you completely lost reverse one of the tabs on the reverse band probably broke off .it is a big job if that is it best to get a second opinion from a transmission shop

Mar 02, 2013 | 2002 Ford Escape

1 Answer

MY 2002 FORD ESCAPE IS NOT GOING INTO DRIVE BUT WILL SHIFT INTO REVERSE WHAT DO YOU THINK THE PROBLEM IS?


it my need to be flushed, i had the same problem had to flush 3 times before it shifted normally again

Jan 16, 2011 | 2002 Ford Escape

1 Answer

How do you replace the alternator on a 2002 Ford Escape 24 valve V6?


unhook battery & take belt off,unhook wires on alternator ,take out bolt's that hold it on ,replace in reverse order.

Dec 18, 2010 | 2002 Ford Escape

1 Answer

Where is the crank position sensor located on the 2002 Ford Escape? Will I need a rubber O ring or paper spacer?


The Crankshaft Position Sensor (CKP):
4 CYL - located on the front of the engine, near the flywheel end of the block. remove exhaust manifold, disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 62 inch-pounds
6 CYL - located next to crankshaft pulley - remove right wheel, remove lower right splashshield. disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 89 inch-pounds

Dec 17, 2010 | 2002 Ford Escape

1 Answer

2001 Ford Escape not responding to shift selector on column. stuck in reverse. a man reached under hood somewhere and manually made selector move to drive, so I could get home. what do I repair and how?


the shifter which hooks to the box under the hood is missing a rubber ring, causing it to slip off. just go to an auto parts store and buy some shifter rings, and press one on

Oct 25, 2009 | 2002 Ford Escape

3 Answers

STUCK CD


you will have to remove and open the changer, and remove cd that way, hope this helps

Jun 22, 2008 | 2002 Ford Escape

Not finding what you are looking for?
2001 Ford Escape Logo

915 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...