Question about 2004 Saturn ION

3 Answers

I have a front end clunking when i go over bumps and turn the wheel from side to side on my 2004 saturn ion??? any answers?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

Have the front end checked that sounds like either ball joints which can be very dangerous, or control arm bushings.

Posted on Jan 04, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

Front struts are bad needing replaced asap Safety concern

Posted on Jan 04, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

Could be lower ball joints, sway bar links (if applicable), lower control arm bushings (not likely), really bad wheel bearings (if you hear a loud grinding as well), but most likely it's the strut tower bushing/bearing assembly, do not attempt to replace these on your own a strut spring can kill you. i wont go into the stupid things i've done or what i've seen but believe me strut springs are dangerous!

Posted on Jan 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Saturn ion makes a front end clunking problem when i turn wheel


check that the wheel nuts are tight and right for the rim. Check all ball joints and steering joints. Check wheel bearings for condition and adjustment.

Jan 06, 2014 | Cars & Trucks

1 Answer

I have a 2006 Saturn Ion. You can hear a very faint clunk when turning the steering wheel at slow speeds. Any thoughts?


it is a c/v joint when u turn in a circle u will here what side it is on .. it is usualy a job for some onethat knows what they are doind to replace for they are hard to get off .. they range from 40 up pluss labour

Apr 11, 2011 | 2006 Saturn ION

1 Answer

2004 Saturn Ion blinker problem!


Usually when the turnsignal blinks rapid this is a indicator that the turn signal bulbs is blown, you will need to check both the front and rear signal to see which is not working, and then change the blown bulb or bulbs.

Dec 16, 2009 | 2004 Saturn ION

1 Answer

Clunking noise coming from upper passenger side when I hit a bump.


If you aren't afraid of jacking up the vehicle, you can test to see where the problem is coming from. Jack the vehicle up by the pinch well (most newer cars have grooves cut out or that can be popped out behind the front wheels). When the wheel is in the air, try moving it side to side, then up and down. Excessive side to side movement indicates a tie rod end, up and down indicates a ball joint, and all around indicates a wheel bearing which would also be a cause for the clicking sound you are hearing.

Most auto shops will check this for you free of charge when you get an oil change, since they're trying to sell you things anyway.

Apr 14, 2009 | Saturn Ion Cars & Trucks

1 Answer

A noise coming from front end of my saturn is it my tie rods


The noise you hear could be the tie rod ends or several other front end items. Can you jack up the front end? If so then turn the wheels from side to side with your hands griping the wheel at the 9 and 3 oclock positions. if you feel freeplay or looseness you have to reach arround and place your hand on the outter tie rod end and see if the play is there or the inner tie rod end at the rack. I worked for saturn for a few yaears and we had ALOT of front struts that made a clunking sound over bumps. Don't forget the lower ball joints could be bad also. Check these by placing your hand on the bottom of the wheel and pushing and pulling on the wheel with it off the ground while checking the tie rod ends. Good Luck, Scott

Jan 05, 2009 | 2003 Chevrolet TrailBlazer

1 Answer

Front end


Tie rods or ball joints. Get them both checked ASAP.

Oct 18, 2008 | 2003 Saturn ION

1 Answer

Clunking noise while turning/hitting bumps


Hay I would check your sway bar in the front .The bal may have came out of the seat located under front wheel well. Also they could be just loose. Check by rocking your jeep side to side .

Sep 15, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
2004 Saturn ION Logo

938 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...