Question about Chevrolet Blazer

2 Answers

Ok in order to pour gas in what i called the "carb" i have to take some sort of breather off. i have a 2000 chevy blazer 2wd cyl vortech is it the fuel pump gone bad or could it just be out of gas

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

Did you put any gas in the tank? you should hear the fuel pump prime for a second each time you cycle the key from lock to run. the fuel pump will emmit a low whirring noise at the bottom of the gas tank as it primes. if you do not hear the fuel pump priming then try having someone cranking the engine while you beat on the bottom of the tank with a 2x4, whack it pretty good. if it starts then you know the fuel pump is bad, it may run for now but it won't last long so get it to a shop before it stops again.

Posted on Jan 04, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 60 Answers

Turn key on and listen for fuel pump in the tank, it should go on for a few seconds then turn off. if you cant hear it try to listen at the fill cap when someone else turns the key on. if you cant hear it , check the safety shutdown relay under hood, it shuts down fuel pump and ignition

Posted on Jan 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy will not start


Check spark. If fuel pressure is approx. 60 it should be doing ok. I believe the low end for vortech motors is around 55 psi.

Mar 08, 2013 | 2000 Chevrolet Blazer

1 Answer

Will not start but if i poor gas in the carburator it will then when i shut it off and then try to start it it will not start back up unless i poor gas in the carb what could it possibly be thank you....


Its faulty fuel pump.When you pour gas in carb, it gets fuel directly, but when you start without pouring gas, then fuel is not reaching there.Low fuel pressure.Replace fuel pump and fuel filter.----- Thank you.

May 19, 2011 | 2000 Chevrolet Blazer

1 Answer

My 1995 chevy blazer has set set since 2007 it has a 4.3L v6 vortech motor in it, the it has set for so long is because it had black smoke come out of the exhaust pipe?


yes, add some premium gas to the tank and some fuel injection cleaner and let it run. It should clear up. But the old gas in the tank needs to be diluted with fesh high octane gas. Adding a bottle of rubbing alcohol can help too.

Mar 26, 2011 | 1995 Chevrolet Blazer

1 Answer

My 2000 chevy blazer hesitates when accaleration and doesnt start


YOU NEED NEW SPARK PLUGS AND WIRES.CLEAN THE FUEL INJECTORS.BUY A BOTTLE OF INJECTOR CLEANER POUR IN FUEL TANK OF GAS ALSO.CHANGE FUEL FILTER THIS LITTLE TUNE UP SHOULD HELP.

Jun 01, 2010 | 2000 Chevrolet Blazer

2 Answers

Chevy won't start and brake is locked up too.


Probably broke the neutral safety switch. Try putting the gearshift in neutral. If the truck cranks then, it is definately the switch. Try this and let me know if it helps :)

May 06, 2009 | 2000 Chevrolet Blazer

1 Answer

2000chevy blazer random cyl missfire number 1 cyl


Just to let you Know what you R getting into-I just got rid of My 2000 Blazer (THANK GOD)!!!! If you check out the Recalls and Complaints Online for the 2000 and Up Chevy Blazer you will be Reading for Months!!!! I am Chevy to the BONE and bought this for My Wife-It was GREAT for the first 15000 Miles and then Everything went Haywire! The Seats Broke, Lights quit, Tranny went Twice, Brakes Failed 3 Times, NEVER Ran Right again, Guages quit working, ON and ON and ON. GM will NOT honor these Recalls and Fixing them is REALLY Expensive. Just MY Opinion But, GET RID OF IT WHILE YOU CAN!!!! Took a BIG loss on Mine and Don't Regret it!!!!

Dec 29, 2008 | 2000 Chevrolet Blazer

1 Answer

1996 blazer wont start after I replace a few a/c parts


Re-check battery terminal and make syre they are tight and making good contact, check for corrosion and remover all if ther is any. Check main battery fuse and make sure it good. Check battery cables and ground wires. Good Luck

Dec 18, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...