Question about Ford Fairmont

Open Question

Ford falcon EL big end torque setting - Fairmont Ford Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 116 Answers

SOURCE: ford falcon el. wont start. raa checked has spark

Most older cars have a mechanical fuel pump mounted to the side of the engine. Usually turns from the Cam or Crankshaft. i would check under the Valve Cover area. should be a small pump that is mechanically driven by the engine. probably half the size of your fist. Trace the fuel line from the carb to it. most oder cars have this set-up. I hope this helps you out. Never worked on a Ford Falcon. My 74 dodge B100 had that as well as my 78 Lemans. Good Luck!

Posted on Jun 04, 2009

Ad
michael_grey
  • 365 Answers

SOURCE: engine bearing torque settings big end and main bearing

4 cylinder correct?
1bac25a.jpg

Posted on Jun 20, 2009

  • 115 Answers

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

Posted on Sep 04, 2009

  • 1 Answer

SOURCE: timing belt on el ford falcon

Just put it on tensioner arm does the rest use a 3/8 drive ratchet

Posted on Sep 20, 2009

  • 91 Answers

SOURCE: need torque settings for big end and main bearing

big end - stage one 18-22 Nm. stage 2 40-50 degrees
main bearings stage 1 20 Nm stage 2 90 degrees

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need the big end torque on the Rocam engine please


A cheap shop manual will have this and much more. If you are in this deep you probably need one.

Sep 05, 2016 | 2000 Ford Ka

1 Answer

TORQUE SETTINGS ON OPEL C16SE MAIN AND BIG END BEARING TORQUE SPECIFICATIONS


Which engine size and type? Keep in mind we do not have Op[el in the USA.

Aug 22, 2016 | 2001 Opel Astra

1 Answer

Head bolt torque specification for a ford el


Remember to start tightening the bolts from the middle of the head each side and work your way out evenly !
First to 40 Nm
Then to 90 Nm in the same order you did the first time !

Jun 08, 2014 | 1997 Ford Falcon

1 Answer

El falcon front wheels shuddering under braking , pads ok


Replace the rotors or you may be able to have them turned. Chek your local repair shops, parts stores, or machine shops for this service. Once you replace or have them turned it is vitally important to torque the lug nuts to the proper speck. Improperly torqued lug nuts are the most common cause for warped rotors.

Sep 01, 2012 | Ford Futura Cars & Trucks

1 Answer

Need owners manual '97 ford falcon el


Not for free:
- ford-falcon-1996-1998-workshop-manual
- austech.info/26116-ford-ef-el-service-manual (its page 2 post 39, is still active; I might add, i think you need to be a registered Austech member to view the link for those looking for it).

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 29, 2012 | 1997 Ford Falcon

1 Answer

Timing belt on el ford falcon


Just put it on tensioner arm does the rest use a 3/8 drive ratchet

Apr 27, 2009 | Ford Fairmont Cars & Trucks

1 Answer

Ford el falcon stalls on idle


don't laugh but there is a hose that runs from the inlet manifold to the mapping sensor. mine had a split in it at the motor end made the engine think it needed more fuel. replaced the hose no more problem

Nov 23, 2008 | 2001 Ford Windstar

7 Answers

Firing order for a 1996 EF ford falcon


EF & EL are 1,5,3,6,2,4
EF has a coil pack under the inlet manifold the EL has a distributor
EF uses a waste spark system so 2 plugs are fired at the same time eg 1 & 6 - 2 & 5 - 3 & 4

May 18, 2008 | 1983 Ford Fairmont

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...