Question about 1995 Jeep Wrangler

1 Answer

Does anyone have any ideas on how to troubleshoot ingintion issues on a 95 jeep wrangler. It has no spart at coil or primary

Posted by on

  • stever768 Jan 04, 2011

    how do I test them?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

You might need a crank sensor or the pick-up coil in the distributor may have failed.

Posted on Jan 04, 2011

  • stever768 Jan 04, 2011

    How do I test them? whats a Crank sensor and where is it located?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep 95 wrangler power to coil no spark changed wires cap coil need help never gave me a problem before won't sart checked ground everything looks good


Remove distributor cap have someone tap the key while you watch the rotor inside the distributor if it does not move that is the problem then it could be the gear shear pin has broke or cam is not turning distributor.

Sep 23, 2012 | Jeep Cars & Trucks

1 Answer

95 jeep wrangler cranks but won't start. replaced crank shaft sensor, coil, plugs. battery is good.


After you crank it for a while, take out one of the spark plugs. If it is dry then you have a fuel issue. If it is wet and smells like gas you have a spark issue. Find that out and report back and then we can get more specific.

Dec 19, 2009 | 1995 Jeep Wrangler

1 Answer

95 jeep wrangler making tractor/old tyme car sound


It sounds like you have a bad valve or a cylinder isn't firing. Pull the spark plugs and check them for deposits and clean, regap or replace. Do a compression check of the cylinders to determine if you have a problem with a valve.

Nov 30, 2009 | 1995 Jeep Wrangler

1 Answer

Have 1995 jeep wrangler-2.5 engine, won't start, have power to coil pack but not past coil pack, replaced coil pack with new one,electrical problem or possible sensor just not sure what to look for,anyone...


Most common cause is the crank sensor...It tells the computer when to fire off coil. Cam sensor does this as well but is less prone to failure. Don't change parts because I said so! Proper testing is essential! Test b&c terminals of sensor with an ohmeter. There should be no continuity there (same as when the ohmeter probes are not connected to anything) Terminals should be marked on harness connector.

Apr 15, 2009 | 1995 Jeep Wrangler

1 Answer

95 jeep wont start


align marks properly on the top pulley gear,,and all the lower pulley gears,re-install chain ,then bring the cam shaft around to TDC then check that the distributor is actually pointing to number one cylinder.

Dec 10, 2008 | 1995 Jeep Wrangler

2 Answers

Luging down


have the coil tested

Aug 08, 2008 | 1995 Jeep Wrangler

2 Answers

95 jeep wrangler overheating and hissing sound


Had the same problem on my 95 Wrangler within the last month. I was told that the radiators on Wranglers tend to wear out, and don't push fluid through after 10 years or so. I decided to 'fix' everything at the same time. I replaced the radiator, the radiator hoses, and the water pump. That stopped the leaking, and fixed the problem. Water pumps run less than $50, and is actually something you can do yourself. I'm not mechanically inclined, but I needed to save the labor charges from the mechanic, so I took at shot. I had no problems. It does help to have an extra pair of hands to replace the serpentine belt.

Jul 25, 2008 | 1995 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...