Question about 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Low beam head light donot work and bulbs are good

Posted by on

  • 4 more comments 
  • yadayada
    yadayada Jan 04, 2011

    Is this both headlights? if you turn the low beams off and on a few times do they blink and go out?

  • rogers_archi Jan 04, 2011

    not fuse

  • rogers_archi Jan 05, 2011

    not fuse

  • rogers_archi Jan 05, 2011

    thanks but its not the fuses

  • rogers_archi Jan 06, 2011

    thanks. yes it does email is rogers.archie@yahoo.ca thanks again..

  • rogers_archi Jan 07, 2011

    thanks

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!!
Check fuses F C B E G on the Engine compartment Fuse Box. Headlights have a separate fuse each.
Good Luck!!

Posted on Jan 04, 2011

  • Rene J Solis Jan 05, 2011

    Do you have the quad headlamp type? Is the vehicle equipped with Day Running Lights? I would need an email address to send wiring diagrams to, this site only allows 120k images and the resolution is very poor.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

Actually there is a fuse in your fuse box which controls the low & high beams check and see if it has blown.

Posted on Jan 04, 2011

  • Wendel Callender
    Wendel Callender Jan 06, 2011

    Ok not fuse your dimmer switch is bad needs to be replaced most likeky located on turn signal switch. Hope this helps.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fludic verna headlight is very poor???chould i add cutout and use more 100/90 w bulb to get more light...which cutout brand is good


The standard lights are quite good enough if the reflectors and lens are really shiny and not partially rusted. Large bulbs run the risk of melting the plastic reflectors costing new head lights. Adjusting the head lights to correct beam height will also help. You can use relays in the system. Disconnect the wires to the back of the bulbs and attach then to the trigger pins of the relay (4 relays-2 high beam L+R and 2LBeam L+R). Run fused power wires from the battery to the power pin of the relay and out to the beam pin of the bulb. earth the bulbs as normal. The operation works like this You switch on the lights to low beam and the power from the switch energises the relay and drops in the contacts which allows power from the battery ,through the bulb low beam to earth. Switching to high beam energises the relay and allows power from the battery through the relay and out to the high beam part of the bulb through to earth. You have full 12 volts to the lights and reduced current through the light switch. 4 relays --1 each for each light low and 1 each for each light high. jump the wire from each beam position between relays of the same light so that they work off the one wire from the switch

Dec 10, 2013 | 1991 Suzuki Swift

1 Answer

2002 Cadillac deville sls low beams donot come on


Low beams may be burned out. The low ones usually go before the high beams.

Sep 08, 2012 | Cadillac DeVille Cars & Trucks

3 Answers

Low beam head lights not working - The low beams, both stopped working. The high beams work fine. I checked the fuses and all 4 are good. I even swapped the low and high beam fises just in case. No...


if the fuses are good then you need to check for power and ground at the headlight plug that attaches to the headlight bulb if you have a good power and ground there and the connections are good then the bulbs are both no good.or if you can tell the bulbs are burnt out by looking at them then you don`t have to check powers and grounds.you also can directly feed power and ground to the bulb and check both the terminals for high beam and low beam as you cannot tell which is which by looking at the terminals

Mar 04, 2011 | 2001 Ford Focus

1 Answer

2002 gmc safari head light won't work on low beam but will work on high beam


First check, is there more than one headlight bulb, if so, the low beam bulb has failed, needs replacing.

If not you'll probably find that the head light bulb has a double filament, low and high beam. The low beam filament has failed. You have to replace the bulb.

Dec 24, 2010 | GMC Safari Cars & Trucks

2 Answers

My low beams keep shutting on and off but high beams are fine


this could be solved by taking the bulb out of its holder and cleaning the contact of the bulb and holder.
turn the ignition on after this with the bulbs in the holder and plugged in but not in the headlight kitself.Turn the lights on and see if the work if still the same try moving the bulb while on in its older and see if its just loose. if so holding it one way it will work. wedge something something to hold it in place or buy a used bulb holder.
Check the fuses at the same time and the wire plug that powers the bulb. check and clean the contacts of these also
Let me know how it goes and ill help again if it persists.
bakerboy11@hotmail.com
Automobile

May 17, 2010 | 1994 Dodge Ram

1 Answer

Daytime running light working fine but can not switch on the head light? 1998.


Pull the head light switch and check it for out put.Do you have high beams?Check the low beam headlight bulbs.If you have high beams,and low beam bulbs are good,replace the dimmer switch.

Nov 10, 2009 | 1998 Ford Escort

1 Answer

I own a 1995 honda odyssey minivan and the drivers front head light is not working because of the wire connection? what do i do to fix this problem because I got stop for having only one headlight? thank...


hello annette from uk you think it may be connection ?? is head light not working on dipped beam? but high beam ok ? if so it may well be the low beam element in h/light bulb has blown however you could also check the fuse as each side head and sidelights have their own fuse check handbook for position of fusein box if ok then you can try the other head light bulb from other side into the plug connector of drivers side and if this works on high+low beams ? your old bulb is blown feel sure you can do these checks !? approx price of new bulb in uk £4 -50 but carry out above checks !st b 4 you buy bulb ? if it is a bad connection on plug ? another bulb will have same problem hope you understand all above ? and wish you good luck from n/west uk

Oct 30, 2009 | 1995 Honda Odyssey

1 Answer

2004 chevy trailblazer low beams not working fuses good bulbs new


Check the relay or your head light switch has gone bad. 

Apr 06, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

97 chev 4x4


Check the dimmer switch.

Nov 04, 2008 | 1997 Chevrolet K1500

1 Answer

1999 Chevrolet Astro Van problem


the head lights have tree wires goig to it one groun one gets power when high beams on the 3rd gets power only with low beam on test the wires or try by plugin a good known head light to conector if it works with low beam then replace both head ligts because head light come with two bulbs in one high and low

Jun 02, 2008 | 1999 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...