Question about 1985 Ford Bronco

1 Answer

Engine stalls out when I turn the wheel - 1985 Ford Bronco

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,822 Answers

This problem is caused by a sludged up idle speed control air bypass valve and throttle valve, please do the following procedure to restore the idle speed control and stop the stalling.

I want you to get a can of intake cleaner (ABOUT $5.00) from any local auto parts store like NAPA or Carquest, do not use carburetor spray, intake cleaner only or u will damage the Teflon coating inside the throttle valve and air bypass valve, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Jan 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wolfpac 3100 engine stalls with steering movement


the power steering pump is loading the engine to do the job and the engine rpms at idle are not compensating for the load

Apr 21, 2015 | Cars & Trucks

1 Answer

I raised my front wheels with a floor jack the left wheel spins normally but the right wheel barely spins.


the differential action means that the wheel with the least resistance will spin faster than the other. The other turn because of friction and fluid motion. Should you grab hold of the turning wheel then the other wheel will pick up speed and spin. The differential has nothing to do with stalling and engine performance problems
Run the fault codes and check for vacuum leaks especially in the vent controls under the dash and brake booster

Dec 25, 2014 | 2000 Kia Sephia

1 Answer

Engine stalls and check engine light comes on when making a hard left turn


Need a good look to be sure but on the power steering rack their is a switch which increases the idle on turning the wheel when the engine is idleing

Nov 16, 2013 | 2000 Ford Expedition

1 Answer

Engine stalls when wheels turned


you have a bad power steering pressure sensor, seending you some info on it,The switch's function is to signal the PCM when the power-steering system exceeds its normal operating hydraulic pressure, like when you cut the steering wheel all the way to one side and hear that hissing sound from the pump. The PCM then raises the idle speed and/or disengages the air-conditioning compressor to prevent the engine from stalling.

Nov 02, 2012 | 1998 Chevrolet Venture Cargo

1 Answer

89 chevy celebrity stalls when turning


Do the following service it should help the stall out.

Engine stalling and rough run issue at low speeds

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Jul 17, 2012 | Cars & Trucks

1 Answer

Car stalls after turn or idle


Q; Is your service engine lamp on? This vehical has a power steering pressure switch,witch helps your engine maintane idle at parking lot monuvers. its next to your power steering pump.you can check if it works by starting your engine and let it warm up. then without tuching your gas pedal turn your steering wheel slowly , the engine should maintane its idle. if this works and your service eng. soon is not on then try cleaning your throttle plate. A dirty throttle is alot of stalling causes with all vehicals.

Jan 18, 2012 | 2000 Ford Focus

1 Answer

My 99 subaru legacy 2.5 feels like its going to stall when im turning at slow speeds like about to park.


if you are turning the wheel all the way until it stops then you are putting the steering pump in a bind cuasing the engine to slow down more causing the engine to stall ,,, recommend you turn the steering wheel all the way you are going until the wheel stops and then back the other way a little bit to stop this binding,, shoulsd stop your problem

Mar 28, 2010 | 1999 Subaru Legacy

3 Answers

2004 Envoy xl stalls when making turns


this is caused by slow engine idle speed, do the procedure below.
Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.



Jun 16, 2009 | 2004 GMC Envoy

1 Answer

Engine stalls when the stearing wheel is turned


there is a switch on the power stearing that shuts off the a/c when you turn to hard it sounds like it is shorted out or going bad

Nov 24, 2008 | 1995 Pontiac Grand Am

1 Answer

Ford falcon stalls with ac on


the engine puts out 'X' horesepower....the combination of A/C on demands and turning the wheel..(putting major pressure on power steering system and its belt) ..kills the motor ..its normal..dont do those things at same time anymore

Nov 09, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...