Question about 2005 Hyundai Tucson

2 Answers

How do you replace a fog light bulb on a 2005 hyundai tuscon"?

Posted by Anonymous on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What is part number for a 2005 hyundai XG350 fog light bulb?

Posted on Dec 07, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Undo the hatch back {life the tail up as if you were wanting to gain access to the boot ..you will notice on either side both lighting clusters .depending on what side needs replacing .all you have to do it use a size 2 Philips screw driver to remove the black screws holding in the lighting clusters the locate the broken lamp{bulb} then twist the holder half a turn then replace the lamp {bulb} and then refit the cluster ..PLEASE note when you remove the screws you will have to gently ease the lighting cluster away from the body of the vehicle as if you try to rip it of you will damage it .there are two lugs that slide in to the bodywork of the car .make sure that you take a little time to locate them and check that the lighting cluster fits nicely to the vehicle before you replace the screws ..its worth trying the replacement lamp/bulb before you replace the screws ..just in case you have replaced a fault one with a faulty one !!! it can happen .

Posted on Apr 22, 2011

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ghost4548
  • 776 Answers

SOURCE: Fog Light Bulb 2008 Elantra

Simple to do.

3624ae9.gif

5e693d8.gif

Posted on Jun 20, 2009

  • 566 Answers

SOURCE: 2007 Hyundai Santa Fe - Replacing fog light

hi have not had pleasure of this on santa fe yet? but will try to help dependant of which side o/s or n/s ? i would first remove the screws holding the front of the under engine plastic cover/shield and drop down sufficient to gain view/access? to the rear of fog lamp then if a cover is on? try turning anti clock to remove? or if rubber cover pull off? then the bulb and clip should be visible? unplug the wire from bulb then the spring clip holding bulb in place normally just sring the 2x top ends together and swing down/clear to remove bulb? refit new bulb correctly! pay attention to position old bulb positioned? then clip securely and re connect wire at this stage it would be best to ensure bulb works ?? before you re assemble all else? wish you luck and hope this helps with your problem ?

Posted on Oct 28, 2008

techbuster
  • 5081 Answers

SOURCE: how do you replace the fog light bulbs on a 2007

Look under the bumper and you will see two large phillips head screws right in front of the wheels. Take these two screws out and bend/move the plastice piece out of the way. Now you can easily get to the bulb. There is a cap that twists off that protects the wires and back of the bulb. Twist this off and then remove the plug portion from the back of the bulb. The bulb then turns 1/4 to 1/2 revolution to loosen and remove. Reverse steps for installation.

Posted on Dec 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai tuscon 05. Reverse light doesnt work, bulb fine ,fuse are good and new switch installed. What next?


Does bulb socket have a ground wire, or just uses mounting point as ground? Check for voltage at each part of system. Start with fuse, then switch both in and out of reverse, then bulb.

Dec 19, 2014 | Hyundai Tucson Cars & Trucks

1 Answer

How do you remove and replace engine on a 2005 hyundai tuscon


you drop the engine and trans out the bottom as a assembly then seperate them

Aug 12, 2012 | Cars & Trucks

2 Answers

My 2008 Hyundai Tuscon "check


Please see my tip at http://www.fixya.com/cars/r5932051-check_engine_light_check. These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Feb 25, 2011 | Hyundai Tucson Cars & Trucks

2 Answers

My headlight bulbs in my 2006 hyundai tuscon need replacing. i've bought the bulbs, bu don't know how to replace it


first open the bonnet then remove the round cover on the back of the lighting cluster {its like a jar top} then remove the wiring to the bulb ..then carefully undo the spring clip that hold the bulb in place {as in most cars} its a bit fiddly but its like a spring clip that is fixed at one end then goes over the terminals to a little space on the other side of the terminals {you will see what i mean when you remove the ;: jar top ;; then gently remove the bulb ..it may be a good idea to upgrade now to high out put bulbs {available from many motor factors} when refitting always wear plastic gloves {to avoid getting moister from your hands on the glass envelope of the bulb ..any moister will shorten the life of the replacement bulb if you do put moister on the envelope of the bulb clean of with a none oily spirit } now refit the new bulb {it only fits one way then the tricky bit refit the retaining wire this can be easy or a pig to do ! once you are happy that the replacement bulb is home OK then fit the cable and them refit the jar top .then teat ..good luck ..the batter side is the hardest ..it may be worth removing the air intake hose ..if you do this ..its just two press screws with plastic plugs its east to remove and re fit there is no need to remove the battery
STRAKER1999

Nov 14, 2010 | 2005 Hyundai Tucson

1 Answer

How do I replace fog lights on my 2002 Hyundai Santa Fe?


Look up into the bumper and see if you can access the fog light. The bulb should just twist out of the back. If not, the assembly should either pop forward or back to come out. I've heard though, that many santa fe's require the removal of the entire front bumper fascia just to get to the bulbs in which case you'd have to remove your headlights to get to the screws holding the bumper fascia on

Sep 09, 2009 | 2002 Hyundai Santa Fe

3 Answers

Directions for replacing fog lamp bulb on 2005 hyundai xg350


first start by popping the hood then removing the gray caps covering ether the low beam or high beam depending on witch your replacing these are located on the right front by the battery and left front by the windshield fluid reserve then undo the metal clamp securing the bulb then carefully remove the bulb keeping in mint to only attempt this after the bulb has cool because they get extremely hot and never touch the bulb if you plan on using then again after that disconnect the wire harness from the bulb then take your new bulb and it will plug right in.WARNING HID BULBS WILL NOT WORK OR CONNECT PROPERLY IF YOU DON'T HAVE A COMPLETE HID KIT.

Aug 12, 2009 | Hyundai Motor 2005 XG350

2 Answers

2005 Hyundai Tuscon Catalytic Converter


its part of your exhaust and cannot be replaced yourself. take it to a local shop and not the dealer and it will be a whole lot cheaper

Oct 22, 2008 | 2005 Hyundai Tucson

Not finding what you are looking for?
2005 Hyundai Tucson Logo

826 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...