Question about 1991 Chevrolet S-10 Blazer

2 Answers

I have a 1991 chevy s-10 blazer 4.3 l engine not vortex. The fuel line is cracked can I buy the fuel line at a parts store or Do I have to go to the dealer to get it.

Posted by on

  • Nickki Mystic Furge-Lyons

    Does anyone know where I can get a picture of the fuel lines. I need to be able to see what i am working with. Thanks. i love this website. You guys are great.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 157 Answers

You should be able to go to a parts store and get it but i might go to a junk yard to see if they may have one in decent shape cheaper

Posted on Jan 04, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 784 Answers

You can buy the fuel line at any parts store and make up the exact size that you need, ( you do not need to get it through the dealer ). or if you want the exact fit,length and size you can always go to your local chevrolet wrecking yard and pull the lines off of a wrecked S-10.


c...

Posted on Jan 04, 2011

Testimonial: "Thank you I will call the local junk yard in my area in the morning first. Then the part store if they do not have what I need. "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start


1989 Chevy blazer 4.3 won't start..I have ... - CarGurus

www.cargurus.com > Questions > Chevrolet > BlazerCarGurusJan 30, 2013 - 96 Chevy S10 Blazer with 4.3 L engine vortex will turn over but won'tstart. ... i a 93 k5 blazer 5.7tbi in cold weather it will not start, if i hook jumper ... was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, ...

Oct 12, 2015 | Cars & Trucks

2 Answers

I have 1993 cev s 10 blazer will only start wiht starting fluid,i canged modgle control,plugs ,fule filter,wiers .what can i do next


I have 2000 Chevy blazer 4.3 l v6 vortex I had the same problem I would spray starter fluid into the air flirted canester Nd it would start as soon as I stopped spraying the fluid the engine would die first I checked to make sure my gas pump was working in the gas tank second I checked my fuses under the hood and last the fuel pressure so my gas pump was on in the tank fuses were also ok but I had no pressure on the gas line so that ment my gas pump was bad I replaced it after replacing it my blazer fires problems free now

Jun 24, 2012 | 1993 Chevrolet S-10 Blazer

1 Answer

I was given a 1994 s10 Chevy Tahoe vortex blazer


I was given a 1994 s10 Chevy Tahoe vortex blazer??????? It's either a S-10 pick-up or it's a Tahoe or a Blazer not all three . So which is it ?

Mar 11, 2017 | 1994 Chevrolet S-10 Blazer

1 Answer

Does a 1991 chevy s-10 blazer have inline fuel pump?


  1. Place wheel chocks behind the passenger side wheels, and lift the driver side of the Blazer with a floor jack. Place jack stands under the frame, and lower the vehicle onto the jack stands. Supporting the truck with the jack stands in this manner prevents injuries that occur if the floor jack fails.
  2. 2 Remove the fuel filler cap, and turn the ignition key to the off position. This relieves some of the fuel pressure on the system, and prevents the fuel pump from starting when the filter is removed.
  3. 3 Locate the fuel filter on the driver side frame rail, just behind the front door. The filter is a cylindrical shaped part, about six inches long, that's in the fuel line on the inside of the frame rail.
  4. 4 Place a drain pan under the filter to catch any fuel that spills. Loosen the filter fittings by using a 21mm wrench to hold the filter while turning the flare-type nut on the line with a 16mm wrench. Remove both sides of the fuel line from the filter and drain it into the drain pan.
  5. 5 Check the rubber O-rings located on the fuel line ends for tears and nicks. Replace any O-ring seal that shows damage. These seals are available at your local auto parts store.
  6. 6 Insert the fuel lines into the ends of the new filter, and thread the flare-nuts into the filter by hand. Be careful not to cross-thread them and cause the need for replacement fuel lines. Tighten both lines with the 21mm and 16mm wrenches.
  7. 7 Raise the truck off the jack stands with the floor jack, and remove the stands from under the vehicle. Lower the Blazer to the ground. Reinstall the fuel filler cap.
  8. 8 Turn the ignition key to the "Run" position--and then back to the off position--three times to prime the new filter. Each time the key is turned to the "Run" position, the on-board computer turns the fuel pump on and opens the injectors to add fuel for starting. Start the engine and check for fuel leaks.
Waterbed Pump Video Inst.


This has an electric fuel pump located in the gas tank.

To replace or check it you do one of 2 things. You can drop the tank or cut a hole in the cargo area to gain access as they are on the top of the tank.I would not suggest cutting hole


Dec 09, 2010 | 1991 Chevrolet S-10 Blazer

1 Answer

No Fuel To Throttle Body On A 1991 Chevy Blazer S-10, 4.3L


ok, well as for the relay, yes there is one in your under hood fuse box....or inside the drivers door...but if you don't hear the pump, fear the worst, it may be dead.....happens ALOT.....check and change the relay, about $10, then if nothing, time for a new pump.

Feb 15, 2010 | 1991 Chevrolet S-10 Blazer

2 Answers

What type of steel break line is on a 1991 Chevy s10 blazer. I know to length is 20" but I need to know the size of the bolt that goes into the wheel cylinder. and every thing alts about the break line. if...


You need a 10MM Nut and it is a double flared nut you can remove the line and go to Na pa auto parts and buy the line, you may have to buy a tubing bender to get it to fit, but remove it so you get the tight thread pitch because thee are two types.

Jan 10, 2010 | 1991 Chevrolet S-10 Blazer

1 Answer

Bent A-Arm on a 1991 Chevy S10 Blazer...repair$???


I would guess $500 - $1500 to do this job depending on how much damage was done when the arm was bent.

"SMALL OIL AND TRANSMISSION LEAK AND THE RADIATOR LEAKS OUT SLOWLY." -- the radiator leak could get bad enough to require repair.

I think $400 obo is an okay price, can't get much lower for a vehicle that will get you to the store and back.

May 27, 2009 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...