Question about 1998 Oldsmobile Cutlass

1 Answer

Replaceing the serpentine belt...what the easiest way to do it ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

With the proper tools, it takes 10-15 minutes. use the belt tensioner tool to rotate the belt tensioner and the belt will loosen to come off. take belt of while noticing the way it goes. install the same way, place belt as close as possible and relieve tension of the tensioner with the tool and voila !

Posted on Jan 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1994 Sedan Seville needs an alternator how do I change it


The alternator in your car is one of the easiest fixes you can do. First, remove the NEGATIVE (-) battery cable.
You must relieve the tension on the serpentine belt by loostening the retaining bolt, then remove the wiring harness plug from the back of the alternator, then remove the two retaining bolts from the alternator. Reverse the procedure to install the new alternator, making sure that belt tension is adequate. Replace the netgative battery cable last, and test.
If the serpentine belt is loose, replace the belt.

May 11, 2015 | Cars & Trucks

1 Answer

How to replace a serpentine belt on a nissan 2007 2.5 s altima


Video Tutorial:
https://youtu.be/h4qGOJ5PpSw

The easiest way to replace serpentine \ drive V belt on 2007-2012 Nissan Altima 2.5L 4 cylinders engine:
- remove front wheel on passenger side
- remove plastic splash cover
- user 14mm offset wrench to turn belt auto-tensioner in clockwise direction
- block auto-tensioner from moving using locking mechanism right above the auto-tensioner pulley
- slide the belt off the smooth non-grooved water pump pulley first
and then take the belt completely out
- when installing a new serpentine belt, first hook it onto all pulleys except for water pump pulley. Hook it onto the water pump pulley last
- make sure the new belt is hooked up properly onto all of the pulleys
- unlock the auto-tensioner
Original OEM Part #:
Amazon com OEM 11720 JA00B Nissan Altima Serpentine Belt
Follow this diagram to route the new belt on 2.5L engine:

replace-serpentine-belt-nissan-2007-2-5-02rhvdv200sh3oinuqbnuvnv-2-2.png

Jan 04, 2013 | 2007 Nissan Sentra 2.0 SL Sedan

1 Answer

How is the best way to replace a serpentine belt on a 2005 kia sorento


First remove the engine plastic cover by removing the bolts that hold in. Then loosen the nuts at the front of the AC Belt and Power Steering Belt. Now use a Socket set and loosen these two belts by turning the tension adjustment bolt, Anti-Clockwise.

You have to remove the first two belts (AC & Power Steering) before reaching the Serpentine Belt.

Now loosen the nut on the front of the lowest pulley before loosening the serpentine belt.

To loosen the serpentine belt, you could either remove the metal skid plate at the bottom of the engine by turning the tension adjustment bolt, Anti-Clockwise or reach down from the top and loosen it with the socket set ( quick & easiest)

Sep 13, 2011 | 2005 Kia Sorento

1 Answer

Where do i put more power steering fluid in at


The easiest way to locate your "power steering reservior" is to first locate your serpentine belt and then follow this belt to this reservior. The reservior will have a pulley for the serpentine belt.

Please remember to rate this solution. Thanks!

Feb 05, 2011 | 1998 Saturn SL

1 Answer

What is the easiest and fastest way to replace the tundra serpentine belt?


loosen tensioner, take belt off, install new belt except last pulley, loosen tensioner, install belt on pulley, let tensioner tighten belt. If it takes 5 minutes, your doing something wrong.

Aug 25, 2010 | Toyota Tundra Cars & Trucks

1 Answer

Need 1993 plymouth voyager serpentine belt diagram


Which engine?
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..

http://www.automd.com/46/how-to-replace-a-serpentine-belt/

Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.

I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..

May 15, 2010 | 1993 Plymouth Voyager

1 Answer

How do I locate tension wheel to replace serpntne belts 04 sentra


The serpentine belt runs everyting under the hood...easiest way to locate the tension wheel is to look at every other wheel that the belt runs to.

Your tension wheel will be where the belt runs without being in a V channel, the tension wheel will be flat..no grooves to accomodate the belt.

Hope this helps

Feb 01, 2009 | 2004 Nissan Sentra

2 Answers

Serpentine belt on 1992 dakota


You don't mention which engine you have in your '92 Dakota, but it's likely the 3.3L and if so, here's the diagram. Even if your engine is not the 3.3L the principals for replacing the belt are the same.

Get a serpentine belt tension release tool (local parts store) and use it to take the tension wheel away from the belt, which will make it loose enough to remove by simply pulling it off one of the pulleys (the alternator will be easiest) and then wiggle it out of the engine bay. The tool should come with a selection of heads for the different variations of tensioner arms/bolts. Once the belt is removed, replacing it is the reverse process.

Hope this helps, and please rate my answer.

2e5cb67.gif

Jan 08, 2009 | 1992 Dodge Dakota

Not finding what you are looking for?
1998 Oldsmobile Cutlass Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...