Question about 1995 Buick Riviera

1 Answer

95 riviera amber abs & traction control lite stays on

Was advised to change wheel hubs, changed hubs still sme problem???

Posted by on

  • zaraza2u Aug 07, 2008

    problem fixed, it was the abs modulator assembly

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

All four ?

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long


Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


Dec 12, 2015 | Cars & Trucks

1 Answer

Hello my name is amber I have a sateen relay 2005 my abs and traction light control is on and when I drive it it does a push on its own any suggestions???


check fuse/relay for abs system if good will need to check the abs sensors wire /connectors can get damaged by road debris also a hub/wheel bearing going bad can cause these problems since abs is incorporated into it --

Aug 14, 2015 | Cars & Trucks

1 Answer

My Lincoln LS V8 2002 has the ABS and Traction Control light on?


I see is 2002,hub bearing is good but ABS sensor is not good.You have to change the hub bearing.Did you hear any noise from wheels,that sound off bad bearings.

Aug 05, 2014 | 2002 Lincoln LS

1 Answer

I have a 95 buick riviera and the traction control off light stays on and the button wont turn it off


you have a fault in the abs system which is preventing the traction system to operate the most likly cause is a faulty wheel speed sensor you just have to get someone to pull codes out of abs and it will most likely tell you which one it is.

Jan 03, 2011 | Buick Riviera Cars & Trucks

1 Answer

2001 impala- Traction, Abs, Brake lights on


abs sensor is built into hub[bearing]common problem when changing them and or brakes r that the sensor connection is not properly reconnected or wire got damaged recheck the sensor wiring and that connector is connected to clip by strut clip is part of system

Jul 26, 2010 | 2001 Chevrolet Impala

1 Answer

How to turn traction control on a 2004 chevy venture.abs light is on but wheel bearing has been replaced


SERVICE TRACTION CONTROL and NO TRAC light comes on and off. Changed wheel hub and bearings, alignment, brakes, tires...HELP!!!

Jul 15, 2010 | 2004 Chevrolet Venture Passanger

3 Answers

Traction control and anti-locks(ABS) lights come on.


Traction control and anti-locks(ABS) lights come on there is sensors that are pluged in behind the rotors check and see if they are disconected or loose sometimes when you change your brake pads they might come loose and not making contact.

Jul 06, 2010 | 1998 Cadillac DeVille

1 Answer

Traction control and ABS lights stay on


You will need to scan the ABS module, most likely it will be a wheel speed sensor requiring a hub assembly or the main abe electronic module has a bad relay... then change the whole unit with a used one from the bone yard...

You will have to find someone that can scan your abs module to get the ball rolling

May 18, 2010 | 1996 Oldsmobile Aurora

1 Answer

Abs light stays on and traction control stays off in my chevy impala ls the transmission is acting up in drive i took out a fuse called [trans sol] now it drives but acts up in reverse


abs, traction control, tire pressure monitor and fuel economy indicators all use a speed sencer in the wheel hubs, save yourself a lot of greaf and have a mechanic do a code read and test the sencers, i had the same issue and it messes up the whole system, i ended up replacing one hub assembly for about $190,
as for your transmission acting up, put the fuse back in and change the fluid, DO NOT HAVE THE TRANNY FLUSHED, JUST A FLUID CHANGE!!! if you want to drive another day. todays tranmissions are way more complex than they need to be and have many solinoids and sencers that can and do fail, good luck.

Feb 24, 2010 | 2000 Chevrolet Impala

1 Answer

Brake sensor? something else?


You have a faulty wheel speed sensor. This is a magnetic pick up sensor on your wheel bearing hub and it controls your abs. If the car can not sense all 4 wheels then the abs will default back to normal brakes and your traction control will not work. Look at your wheel bearing hubs and check for these sensors. They are on the underside of the car and are black plastic with a wire comming out of it. A piece of gravel may have broken the pick up or the wires to a sensor may be broken as well. To replace it is usually a couple of screws on the hub assembly and a plug to disconnect from your wire harness.

May 27, 2009 | 2003 Mazda Mazda6

Not finding what you are looking for?
1995 Buick Riviera Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...