Question about 1995 Chevrolet Blazer

1 Answer

I HAVE A 95 BLAZER WITH NO SPARK , CHANGED ALL COMPONETS I COULD FIND , STILL NO SPARK , NOW WHAT DO I DO

Posted by on

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Could be the ignition module. It is located on distributor under rotor . Unscrew distributor cap and flip out of the way, leaving spark plug wires attached. Pull rotor off and remove electrical wires on both ends of ignition module. unbolt ignition module and remove. Make sure you put the grease on the metal bottom side of ignition module to disipate the heat that is generated, before you install new ignition module, if you want it to last.Good Luck.

Posted on Jan 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed icm and coil still no spark 95 mercury villiger


ICM ??????? Ignition control module ? This vehicle doesn't have one > PCM - powertrain control module controls the coil from input from the crankshaft position sensor . If you don't know how to test these componets using volt meter your best bet take it to a qualified repair shop.

Oct 01, 2017 | Mercury Cars & Trucks

2 Answers

I have a 95 Chevy blazer... Haven't changed the spark plugs in awhile... Can they possibly fire sometimes but not when the engine cools?


What do you mean"In a while?" If you haven't changed or checked them in the last 25000 miles then do it.
What is the normal change period, probably 12000 or annually?
Start with removing and checking the condition. If you are not sure look at some pictures online or get a pal who knows.
See what it runs like then, if its still poorly come back.

Mar 30, 2015 | Cars & Trucks

1 Answer

95 blazer no spark out of distb cap. Changed cap,


ignition pick-up coil, also called pole piece...

Sep 16, 2014 | 1995 Chevrolet Blazer

1 Answer

95 chevy blazer won't accelerate, has rough idle and back fires


when was the last tune up done on it? have you checked the spark plugs and firing order to make sure it is correct?

Apr 21, 2014 | 1995 Chevrolet Blazer

1 Answer

95 s10 blazer engine froze after changing plenum gasket...what could this be?


Pull the spark plugs and turn the engine over by hand. If fuel comes out of the cylinder than you have a ruptured fuel line under the plenum. If coolant comes out than you changed more than just the plenum and I'll need some more info. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 11, 2012 | 1995 Chevrolet Blazer

2 Answers

I have a 95 chevy blazer with the 4.3 .i have tested and have spark entering the distributor but no spark leaving the distributor to plugs .have put new crank sensor ,cam pos sensor...


That is indeed odd. I would suspect problems with the hi tension cables if this was not part of the ones you changed since the flow of current ends at the distributor. Check also other cables such as the ground. It is puzzling that all plugs would not have any spark. I would also recommend a scanner used to check for error codes given out by the car's ECU.

Apr 04, 2011 | 1995 Chevrolet Blazer

1 Answer

95 Blazer code P0401


Have a little read of this link, it may help you.

http://www.obd-codes.com/p0401

Jun 19, 2009 | 1995 Chevrolet Blazer

2 Answers

My 1995 blazer will not start


Have you changed the module in the distributor?

Mar 21, 2009 | 1995 Chevrolet Blazer

1 Answer

Blazer will not start has spark and fuel pressure


the problem is common for the 93-94-95 4.3 vortex its the spider injection located inside the plenum the part costs between $250 to 400 i had to replace on girlfreinds 94 blazer. ifound one o ebay for $100

Nov 06, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...