Question about 1990 Nissan Pulsar

2 Answers

I need to replace plastic on the tail light of a 1990 pulsar hatch and cant see how to get the old one out, there seems to only be one screw holding it?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 14,036 Answers

Look inside vechicle where tail light is remove carpet and cover should see plastic nuts hold light cover in place should have three large plastic nuts hold light cover in place.

Posted on Jan 27, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,165 Answers

The fasteners may be behind the interior panel of the hatch. Take the one screw out, and if that doesn't release the light, then look for the interior fasteners.

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace hatch opener


You need to remove the vinel panel from the rear hatch.Peal back plastic from access hole. Remove 4 hexnuts that hold the tag light , hatch switch and window controller assemply in place.Pop loose assembly from hatch, remove 2pl head screws that hold opner switch to assembly didconect wireing conector. install new switch.

Aug 25, 2012 | 2007 Toyota 4Runner

1 Answer

1990 Toyota 4 runner How do I replace brake light bulb?


which brake light? if it is in the sides, drop the tailgate/back door and remove the screws holding the tail light assembly in and then it should just pop out. If it is a 3rd brake light, 2 screws hold the cover in and remove those and carefully pry the plastic cover out and gently pull on the bulb

Feb 04, 2011 | 1990 Toyota 4Runner

1 Answer

Need to change right tail light, how?


Open hatch, on inside there will be two plastic clips that go into the side of the tail light, remove the center of the plastic clips, they will pop out, remove the rest of the remaining clip, once you have the plastic clips out, tail light will come off, no screw's holding tail light, just those two plastic clips.

Sep 01, 2010 | 2006 Chrysler Town & Country

1 Answer

How do I replace my tail light bulbs on 1990 LeSabre? How do I get into the assembly to get to the bulb?


OPEN TRUNK LOOK WHERE TAILS LOCATED LOOK FOR LARGE PLASTIC WING NUTS.REMOVE THEM PULL TRUNK LINER AWAY ENOUGH TO REMOVE THE OTHER PLASTIC WING NUTS HOLD THE TAIL LIGHT COVER.WHEN YOU REMOVE ALL THE PLASTIC WING NUTS THE TAIL LIGHT COVER WILL COME OUT ENOUGH FOR YOU TO REMOVE THE BULB.

Nov 02, 2009 | 1990 Buick LeSabre

2 Answers

How to replace tail light


First you need to lift the hatch. There are two screws under plastic caps. Remove the caps and you will be able to unscrew these screws. Carefully using a flat screw driver to pry out the tail light assembly. It have to plastic pin that attached to the car body. do not break the pin. After you pry out the tail light assembly, you will be able to replace the light bulb. Replace everything in a reverse order.

Nov 17, 2008 | 1999 Lexus RX 300

1 Answer

How to Change the taillight bulb 2002 Aerio standard model


You have to unscrew one or two screws (don't remember) to remove the whole light assembly (need the hatch or trunk open to access screws). The solution is work from outside the car not inside.

Nov 16, 2008 | 2002 Suzuki Aerio

2 Answers

Replace tail light bulb


open hatch, look for two screws, remove , push tail light gently back and forth to release from clips pull light assembly out , twist bulb socket to remove from housing, replace bulb.

Aug 20, 2008 | 2005 Kia Sportage

5 Answers

2005 kia rio brake light


I did it!!! To change the left brakelight, you open the hatch and remove the two screws on the right side of the light assembly. Then remove the cubby hole inside the left side of the hatch. Inside you will see 3 hex nuts. You only have to remove the one in the center (closest to you) not the ones down and inside. Once you remove that nut, pull the light assembly off (from the outside). There is a plug that will be holding it on. I carefully **** a straight screwdriver in the narrow side just to get it to move out a little, then you grab the whole thing and pull it out, you may have to wiggle it some. It seems like it will break, but it won't. It's just a metal thing sticking into a plug. The whole assembly will pull out (not too hard so you don't break any wires or connectors) then you follow the instructions to replace the bulb. Once the bulb is replaced, you simply line up the metal thing as you push the assembly back on. You might have to smack (open bare handed please) to get it back in. Replace all screws and stuff and that's it!

Aug 05, 2008 | 2005 Kia Rio

1 Answer

Replacing the tail light


Look inside behind the light and see if there is an access cover, if not you will have to remove the tail lamp to replace the bulb. If you open the rear hatch and look at the lamp you should see a couple of screws that hold the lamp to the car. Remove these and pull the light out.

Jul 09, 2008 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?

Open Questions:

See all 1990 Nissan Pulsar Questions

1990 Nissan Pulsar Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...