Question about Volkswagen Passat

Open Question

Front left dipped beam defective - Passat Volkswagen Cars & Trucks

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnjohn2
  • 5763 Answers

SOURCE: All head lights failed. Display reads: left front

they could fail in pairs, check bulbs ,remove and install new ones also check fuses after installing new bulbs if they dont work because they sometimes pop the fuse when they blow out , also theres a left and right lamp fuse so check both fuses , but only if lamps dont work after you install them. hope this helps, good luck.

Posted on Oct 25, 2009

Ad
  • 1509 Answers

SOURCE: 2005 Cayenne S. Left front

Sounds like it can be just a bad bulb but it doesn't have to be. If the car has ever been wreaked then it's possible that the wiring has been pinched somewhere near the headlight. The dimmer switch is in the steering collum and it would be effected buy turning but it's more likly to be efferted buy both lights not one There's a fuse panel near the drivers left kick panel that has the headlight fuses in it and it's possible the fuse is'nt making a good connection. With the lights on and the czr not moving you may just have to pull on the wires move the fuses and turn the steering wheell to find where the problem is. The dimmer switch should effect both lights.

Posted on Aug 17, 2010

  • 367 Answers

SOURCE: main beam and front fog - scenic 2

check fuses

Posted on Dec 12, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front left dipped beam defective - 2009 Volkswagen Passat. What kind of bulb does it need and how do I change it?


The most common bulb is a H7 to replace remove the cover on the rear of the lamp. Twist bulb holder anti-clockwise and remove from socket. Replace bulb, (Do Not Touch Glass) refit in reverse order. And be patient they are delicate.

Apr 30, 2017 | Volkswagen Cars & Trucks

2 Answers

Replaced bulb in dipped beam. Still not working. What is the fuse code for dipped beam


May not be the bulb or fuse..could be the switch... dipped beams illuminate via voltage from the turn signal...Check your wiring and sockets and grounding . Dipped beams are usually near the bottom front fascia of the car . If there is not a shield there, any debris can cause corrosion, or chafing of wires and connections.

Jun 07, 2015 | Cars & Trucks

1 Answer

Can the headlights be adjusted in 2013 Camry


Yes they should be adjustable because people change tyre profiles front to rear and this alters the drive angle.The adjustment screws are in the headlamp housing behind lamps accessed from the hood/ bonnet side.you do need to do this properly so they align together at the legal height for full beam.there is plenty of online information on the correct height for full beam...once you have made sure all Your tyres are at the right pressure....park on level ground ...at least 3 meters from front of a wall ....and at right angles to the wall....measure the height to the centre of headlight to ground .......mark the right light horizontal line for correct height on the wall and make sure you put lights on full beam....they should shine slightly below (say an inch )to the marked the measurement of height of lamp on the vehicle....adjust until the right hand light horizon is an inch below...now mark vertical line to cross centre of reflected light....this will give you a register point to mark where the left light should fall ...this will be exact distance apart as on vehicle and again adjust left until it falls below 1inch of the measured height line of lamp on car......mark distance from right to left light and mark the same height in chalk....then adjust left light to pinpoint marked chalk cross.adjust the beams by turning the spring loaded screws behind the lights.once you are happy check dipped positions....on right hand drive the lights should dip below and left.left hand drive dip below and right.you probably didn't need so much info but ...hey it's free and it saves any misunderstanding.hope this is of help...please vote.thankyou.

Feb 07, 2015 | Cars & Trucks

1 Answer

98 passat dipped beam not working


the fact you have high beam and not dipped beam .means it is your switch has failed.

Dec 05, 2013 | 2002 Volkswagen Passat

1 Answer

No dipped beam headlights on audi a4 1,9td 2003


Check up dipped beam headlights fuse inside fuse box. For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram. If the dipped beam headlights fuse is OK, check up dipped beam headlights bulbs.

Dec 28, 2009 | 2004 Audi A4

1 Answer

All head lights failed. Display reads: left front dipped beam failed, right front dipped beam failed Do the lights normally fail in pairs or could this be some sort of controllers failure?


they could fail in pairs, check bulbs ,remove and install new ones also check fuses after installing new bulbs if they dont work because they sometimes pop the fuse when they blow out , also theres a left and right lamp fuse so check both fuses , but only if lamps dont work after you install them. hope this helps, good luck.

Oct 25, 2009 | 2006 Volkswagen Passat

1 Answer

I am driving to spain soon, can I adjust the main beam dipping direction from left to right hand dipping without replacing the headlight unit?.


Unfortunately you cannot. The beam pattern itself is different. On left hand drive cars, the actual beam is designed to throw the least amount of light into oncoming cars and will look something like this.
_________
________/


you can't change the pattern as the housing unit itself is what depicts the pattern projected.

Oct 05, 2009 | 2000 Chrysler Grand Voyager

1 Answer

Low beams hight beams do not work on my left side please help me


hi this may be the dip beam element blown ie bulb req's renew? or check the fuses l/h dipped beam as each h/light has seperate fuses for both dip and main beams CHECK BULB 1ST ?

Mar 08, 2009 | 2006 Hyundai Sonata

1 Answer

Head lights wont turn off


if you are saying the front side lights are going off but the headlights remain on ? then could you try this ? put the h/lights on main beam mode then whilst on main beam turn off lights if h/lights go off now ? then with lights still off put onto dipped beam with the switch/stick if h/light come on it is most probably the dipped beam headlights relay that has gone faulty as the h/lights have 2x relays 1for dip +1 for main beam if the above does not make any difference ? it may well be the switch assy hope this helps

Oct 15, 2008 | 1997 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...