Question about 1989 Toyota MR2
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
How long did the 2nd alt. last before it died? The voltage regulator is, I believe, attached to the alternator. Have u had the voltage regulator checked?
Posted on Jan 04, 2009
I don't know if your car has an integrated regulator or not; some house the regulator in a section of the alternator case, others mount it remote from it.
The regulator monitors the load and battery voltag,e primitively but effectively, and controls the current flowing through the field winding of the alternator to ground, changing the magnetic field intensity and consequently the voltage output of the alternator.
The 'hot' end of the field is internally connected to the + output, the 'cold' end is controlled by a transistor inside the regulator which, in turn, is controlled by circuitry monitoring the system voltage.
Some alternators can be tested by sticking a wire through a specified opening, actually shorting the controlled end of the field to ground briefly, while monitoring the voltage across the battery, doing this though for seconds only.
This essentially bypasses a suspected defective regulator; this causes the output voltage to rise instantly to its maximum of ~17 volts if the alternator is OK.
I don't recommend poking a wire at random into an available opening so having a service manual (Haynes-Chilton) would be nearly mandatory.
Posted on Oct 03, 2008
First check alt At The Back of Alt Big Red Wire Were hooks to Post (stud) Do you have voltage ?? How Much??
What Voltage do you have at same Place with Engine Running ??
Now At wires Were they plug into Alt ,Top. Wires in White Plastic Clip, Do You Have Powe With Key On ?? How Much Voltage??
Jump across the 2 in the clip (with Engine Running)ONLY TEMPORARY!! Do You Have Voltage at Battery ?? How Much??
If Over 13volts With Clip On (Jumped) You Need A Internal Voltage Regulator ..
Is Batt Light On on Dash ??? Theres A Lot Of Testing You Can Do !!! And I will Need More Infomation to Keep Going ... These are just some Possible Problems No Way In Depth ...
Could Be a Number of things Or May be Just as Simple As a Blown Fuse, Dirty Batt Cables ETC etc etc I Hope It Puts You On The Right track !!!!!!!!!!
Posted on Jan 07, 2009
clean battery terminals ,bring battery to be tested after charging, after reinstalling battery run car and test alternator output it should be a minimum of 13-14volts if it is under 13 replace alternator , use a voltmeter set on 12 volt 10 amp dc to check the wire to check is located on the back of the alternator covered with a rubber grommet of course hold negative wirw on volt meter to ground and touch red wire to big terminal on back of alternator while car is running should have 14 volts or at least 13 volts
Posted on Jun 24, 2009
Tips for a great answer:
Aug 06, 2017 | Nissan Cars & Trucks
Jun 15, 2014 | 1997 Chevrolet Cavalier
Sep 30, 2012 | Cars & Trucks
Apr 25, 2011 | 2000 Oldsmobile Alero
Feb 25, 2011 | Ford F-250 Cars & Trucks
Dec 01, 2010 | 1999 Dodge Intrepid
Feb 24, 2010 | 1984 Chrysler Fifth Avenue
Dec 19, 2009 | 1998 Lincoln Town Car
Jul 06, 2008 | 2000 Chevrolet Astro
189 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: