Question about 2002 Toyota Camry

1 Answer

The light of License plat doesn't work. Who check or change the lights?

Posted by Anonymous on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 242 Answers

Is really easy;

1; remove the oil filter.
2; remove the tube where the oil filter gets screw, you will need a big deep socket I think is a 22mm
3 remove the two bolts that hold the cooler to the block
4 replace the rubber o ring for cooler and reinstall.
5 replace the metal o ring for the tube and reinstall.
6 install a new oil filter.

Posted on Jan 03, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Plate light does not work, but lights are good and sockets seem good

check bulb the number plate light runs on the same circuit as the side lights so if they are working its got to be a bad earth on the plate light

Jan 24, 2016 | Cars & Trucks

1 Answer

What number fuse is for license plat light

It should be the same fuse as for the clearance lights /park lights

Jun 20, 2014 | 1998 Ford Expedition

1 Answer

License plate lights arent working

You didn't forget to pull the headlight switch to check them? That's odd, usually license plate lights are spliced in from the tail light circuit.
There may be a separate ground for the license lights-if so, should be right nearby the bulbs. Use a test light or voltmeter and make sure fuse 22 has power. You could also check the sockets for power. If you have power to the socket and new bulbs don't work, it would be a grounding problem.

Jul 09, 2013 | Cars & Trucks

1 Answer

Is there a fuse for the license plate light

the license light uses the same fuse as the tailights so it they work its not a fuse.check the bulb then check with a test light for power to the socket centre contact and check for a good ground connection buy connecting the test light to a good power source and touching the probe to the side of the socket.if it lights with both of these test then the bulb is no good.if it doesn`t light up you need to find the problem wether its powe supply or a bad ground.the power wire for the light is brown and you can locate it in the wire loom.

Mar 28, 2012 | 2004 Pontiac Grand Am

1 Answer

My license plate went out on my 2003 Pontiac Vibe. I changed the bulb but it still doesn't work. Could it be a fuse?

A fuse would put the tail lights out as well. Probably a fault in the wiring to the light.

Sep 13, 2011 | 2003 Pontiac Vibe

1 Answer

License plate lights do not work. Bulbs changed still does not work. The right brake light does not work. Changed bulb and plug. Turning signals work, tail lights work. All works on the left side.

Well for the license plat you might wanna check the fuse. and the brake light if one works fine then I'm sure you need a new bulb in the other side. Good luck

Jan 09, 2011 | 1999 Ford Windstar

1 Answer

Tail lights license plate light won't work. all

check the grounds..and check for damaged wires.

Apr 01, 2010 | 1993 Mercury Grand Marquis

1 Answer

I have licience plate light do i go about fixing it?

Usually license plat lights are either accessed behind the panel in your trunk or there will be a few small screws somewhere above or behind your license plate. Probably only takes a screwdriver. Take the lightbulb out by pushing in and or twisting carefully and it will pop out. Take it to auto zone and they willhelp you find the new one. Installation is reverse of removal.

Mar 11, 2010 | 1999 Buick LeSabre

1 Answer

License plate light do not work changed fuses and

check ground wire and clean bulb socket and contact points well with a high # grit sand paper

Dec 07, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2002 Toyota Camry Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides