Question about 2001 Saturn L-Series

1 Answer

Remove car battery - 2001 Saturn L-Series

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Disconnect both poles and isolate them.
remove fan control module by slipping up and off the braket and move it out of the way.
remove battery insulation cover.
remove battery hold down/ control module braket and remove battery upwards without tilting too much or battery acid may leak

Posted on Jan 03, 2011

Testimonial: "Thank you, the hold-down is a bit hidden"

  • alex mcdonough
    alex mcdonough Apr 13, 2015

    Tools needed, 8mm wrench, 14mm socket with extension, 3/8 ratchet, flat blade scraper.The bracket for the fan module has a small tab on the back, left side. I used a flat scraper blade to gently work the tab back away from the bracket. In the cold, remember plastic will crack easily.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the battery located


Underneath the air cleaner housing. To remove and replace if you can start the car turn steering wheel fully to the right or remove tire. Open hood, disconnect remote battery terminals, remove air intake filter box, remove vented panel inside front of right wheel well. On these cars you will have to disconnect exposed positive cable battery terminal first. BE CAREFUL YOUR WRENCH DOES NOT TOUCH ANY METAL WHILE REMOVING TERMINAL FROM BATTERY POST. Loosen and remove the two bolts on the tie down that secures battery in place. Slide battery until the negative terminal is exposed, disconnect and slide battery out into wheel well. Reverse order to install new battery.

Jun 22, 2014 | 2002 Chrysler 300M

1 Answer

Replace battery 98 concord


Jack up the car, remove the tire by the battery. Remove the plastic cover in front of the battery. Disconnect the negative post first, then the positive. Remove the bracket holding the battery in place. Remove the battery and install the new battery in reverse order.

Dec 18, 2013 | Cars & Trucks

1 Answer

Replace battery


Remove the negative cable end from the battery. Remove the positive cable end from the battery. Remove the hold down bolt from the front of the battery hold down. Loosen the rear battery hold down nut and remove the battery hold down. Remove the battery. Reverse this order to reinstall.

Sep 25, 2011 | 2001 Toyota Camry

1 Answer

I need a diagram and step by step in easy to understand words on how to uninstall my dead battery and install a new battery on my 1999 Plymouth Breeze.


the battery is inside the drivers front wheel well behind the inner fender.remove the bolts holding the inner fender to the outer fender and there is a couple that hold the front of it under the car towards the front of the car.pull the inner fender out of the way and the battery is sitting on a plate under a plastic cover.remove the battery cables from the battery and remove the cover,next remove the battery hold down bracket(i think or remove the bracket then cover) and remove the battery.re-install in reverse order.

Apr 12, 2011 | Plymouth Breeze Cars & Trucks

2 Answers

How do i remove a battery from a 2002 chrysler concorde


Battery is behind the front left wheel. You have to remove the wheel to replace the battery. (you can access the battery w/out removing the wheel, but you can't actually get the battery out unless you take the wheel off.)

Once the wheel is off, remove the inner-fender well mud-guard and you will see the battery just forward of the wheel well. From there it's pretty straight forward.

Once this is removed, you should be able to see the battery hold-down bolts.

Remove these and remove the hold-down assembly.
If you are removing the battery, remove the 1st battery cable.

Depending upon what battery you have, you may be able to slide the battery back toward the wheel and disconnect the 2nd cable.

Jack the vehicle up, put on jack stands and remove the passenger side wheel.

On the front side of the wheel well there is an access panel that needs to be removed in order to access the battery. There are 6-8 1/4" screws to remove. Then manipulate the cover until you can remove it, bending it slightly.
If you were unable to disconnect the 2nd battery cable earlier, you can now move the battery further towards the rear of the car. Remove the 2nd cable clamp from under the hood.

Slide the battery all the way out. It is heavy!
Reverse the instructions for reassembly.

Aug 17, 2010 | 2002 Chrysler Concorde

1 Answer

How do i remove the battery tray?


Remove the battery cover.
remove the battery
remove the left front wheel
lower the car onto a jack stand
get inside the wheel well and remove the two long bolts which
go into the battery tray

Nov 28, 2009 | 1998 Saturn SL

1 Answer

How do you remove the old car battery on a 2008 chevy impala ss? (5.3L) thanks sam


  1. Disconnect the negative battery cable.
  2. Remove the right front diagonal brace. The brace goes from the rad support to the fender area.Three bolts need to be removed.
  3. Reposition the positive battery cable terminal cover (1).A red cover over the positive cable at the battery.It pops off.You may need a screw driver to pop it off.
  4. Loosen the positive battery cable terminal nut.
  5. Remove the positive battery cable terminal from the battery.
  6. Reposition the underhood accessory wiring junction block.See steps 9-14.
  7. Remove the battery retainer bolts (1) and retainer (2).
  8. With the aid of an assistant, remove the battery.
  9. Remove the electrical center cover (1).
  10. Disconnect the positive battery cable from junction box
  11. Remove the fasteners (1) securing the electrical center board (2).
  12. Unlock the tabs on the electrical center board.
  13. Lift up on the electrical center board.
  14. Remove the fasteners (1) securing the electrical center bracket (2) to vehicle.

Oct 31, 2009 | 2008 Chevrolet Impala

1 Answer

2005 DODGE STRATUS HOW TO REPLACE THE BATTERY


REMOVAL
The battery is accessible without removing the left front wheel and tire assembly..

Verify that the ignition switch and all accessories are OFF.
Turn the steering wheel to the full left position.
Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
WARNING: NEVER GET UNDER A LIFTED VEHICLE IF NOT SUPPORTED PROPERLY ON SAFETY STANDS.

Remove battery splash shield. Refer to the Body section of the service manual for the procedure.
Disconnect the heater blanket cord, if equipped.
Remove the short bolt from the battery hold down and remove the hold down (Battery Location).
Disconnect the negative and positive battery cables from the battery.
Slide the battery toward rear of vehicle and lift out of the battery tray.
Remove battery from vehicle.

Oct 18, 2009 | 2005 Dodge Stratus

2 Answers

Cant find battery in 1997 crysler sebring conv. where is it located?


behind the fenderwell in front of the driverside wheel

Feb 20, 2009 | 1997 Chrysler Sebring

1 Answer

Battery removal


The battery is located under the right front fender behind the tire. Remove the wheel, remove access panel from fender well. From engine compartment, remove 2 battery hold down bolts,10mm, slide battery rearward to remove battery cables.

Oct 18, 2008 | 2003 Chrysler Concorde

Not finding what you are looking for?
2001 Saturn L-Series Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...